Platform Controls; Operators's Control Box; Powered Extension Platform Control Box; Outrigger Control Box - Skyjack SJ-8831FE Operating Manual

Platform Controls

Operator's Control Box
7
6
5
7
Figure 2-5 Operator's Control Box
Operator's Control Box
This metal control station is mounted at the right front
of the platform. It contains the following controls:
1- Lift/Drive Function Controller - A one-hand
toggle-type lever to control drive/lift motion and steer
motion. It is a "deadman" control which returns to
neutral when released.
2- Lift/Drive Enable Switch - This momentary
"Trigger" style switch (on later models) energizes the
proportional controller. It must be held depressed
continuously while engaging either the drive/lift or
steer functions.
3- Warning Alarm Indictor Light - Light will glow and
an alarm will sound when an unsafe condition occurs.
4- Platform/Off/Base Select Key Switch (CE) - This
three-way selector switch allows the operator to turn
off the power to the unit or to activate either the base
or platform controls.
5- Emergency Stop Button - This red "mushroom-
head" shaped button switch is designed to disengage
power to the platform controls.
SJ-800E Series Battery Powered
117131AH
6- Lift/Off/Drive Select Toggle Switch - If "Lift" is
selected, the lift circuit is energized.
disconnects power from both the lift and drive circuits.
If "DRIVE" is selected, the drive circuit is energized.
7- Operator Horn Push-Button - This momentary
push-button switch activates an automotive-type horn.
1 2
8- Lift/Drive Enable Push-Button (Earlier Models)
- This momentary push-button switch energizes the
lever controller. It must be held depressed while
3 engaging either the lift or drive functions.

Powered Extension Platform Control Box

1
4
8
Figure 2-6. Powered Extension Control Box
Powered Extension Platform Control Box
1- Enable Switch - This switch, when activated,
brings power to the Platform Extend/Retract Selector
Switch.
2- Platform Extend/Retract Selector Switch - This
switch, when activated, extends or retracts the
platform.

Outrigger Control Box

Figure 2-7. Outrigger Control Box
Outrigger Control Box
This metal box, adjacent to the Operator's Control
Box, contains toggle switches to control each
outrigger's extension and retraction.
1- Outrigger Up/Down Control Toggle Switches -
This switch, when activated, extends or retracts
individual outriggers.
Mar. 2002
"OFF"
2
1
SECTION 2, Page 15