Grizzly G0750G Owner's Manual page 61

G4985—Machine Shop Practice-Vol. 1 - Book
G4986—Machine Shop Practice-Vol. 2 - Book
Karl Hans Moltrecht's two-volume work on metal-
working operations delivers the ultimate teaching
and reference tool for basic cutting operations,
layout work, lathe turning, drilling operations, taper
and angle turning, and boring work. Written to aid
the beginner as well as the experienced machinist
or engineer. Due to their nature, books are non-
returnable. Defective books will be replaced.
Figure 97. G4985 Machine Shop Practice Book.
T10665—Adjustable Reamer Holder MT#3
Mount this Pacific Tool and Gauge Adjustable
Reamer Holder in your lathe tailstock, secure
a barrel chambering reamer in the holder for
free floating reamer movement. A knurled wheel
adjustment controls the amount of tension, which
also limits free-floating movement.
Figure 98. PTG Reamer Holder MT#3.
T10667—Bald Eagle Reamer Holder MT#3
Holder is designed to allow free movement of a
floating reamer in 3 directions: vertical, horizontal
and angular, as required for proper performance
of any floating reamer.
Figure 99. Bald Eagle Reamer Holder MT#3.
Model G0750G (Mfd. Since 5/15)
SBCE3450—How to Run a Lathe—English
First printed in 1907, this 56th edition is an exact
reprint from 1966. Well illustrated with vintage
photos and drawings, this 128-page book is writ-
ten specifically about the care and operation of a
metal lathe. "This book is to aid the beginner or
apprentice in the machine shop and the student
in the school shop to secure a better understand-
ing of the fundamental operations of modern lathe
practice in use in modern industries in the United
States."
Figure 100. How to Run a Lathe.
T10719—Crown Savers for .17 to .45 Caliber
Barrels (10 Pk.)
T10720—Crown Savers for .50 Caliber Barrels
(3 Pk.)
With crown savers you never have to recrown
the barrel when installing muzzle brakes or doing
any job requiring a center in the end of the barrel
crown.
Figure 101. T10720 Crown Savers.
-59-