Table of Contents
Advertisement
Follow Rest
The follow rest mounts to the saddle with two
cap screws (see Figure 55). It is used on long,
slender parts to prevent workpiece deflection from
the pressure of the cutting tool during operation.
Adjust the follow rest fingers in the same manner
as the those on the steady rest.
Note: To reduce the effects of friction, lubricate
the fingers with way oil during operation.
Tools Needed
Hex Wrench 8mm .............................................. 1
Open-End Wrench 10mm .................................. 1
Figure 55. Follow rest attachment.
Model G0750G (Mfd. Since 5/15)
Qty
Finger
Rollers
Cap
Screws
Carriage & Slide
Locks
The carriage, cross slide, and compound rest
have locks that can be tightened to provide addi-
tional rigidity during operation, especially during
heavy cuts.
See Figures 56 to identify the locations of the
locks for each device.
Tools Needed
Hex Wrench 3mm .............................................. 1
Hex Wrench 6mm .............................................. 1
Compound Rest
Lock
Figure 56. Location of compound rest lock.
Qty
Carriage
Lock
Cross Slide
Lock
-43-
Advertisement
Table of Contents
