Grizzly G0750G Owner's Manual page 11

Fluid Capacities
Headstock Capacity.................................................................................................................................. 3.5 qt.
Headstock Fluid Type................................................................ ISO 32 (eg. Grizzly T23963, Mobil DTE Light)
Gearbox Capacity........................................................................................................................................ 1 qt.
Gearbox Fluid Type...................................................................... ISO 68 (eg. Grizzly T23962, Mobil Vactra 2)
Apron Capacity......................................................................................................................................... 0.5 qt.
Apron Fluid Type.......................................................................... ISO 68 (eg. Grizzly T23962, Mobil Vactra 2)
Other Specifications:
Country of Origin ................................................................................................................................................ China
Warranty ........................................................................................................................................................... 1 Year
Approximate Assembly & Setup Time ............................................................................................................. 2 Hours
Serial Number Location ........................................................................................................... ID Label on Headstock
Sound Rating ..................................................................................................................................................... 83 dB
ISO 9001 Factory .................................................................................................................................................. Yes
Certified by a Nationally Recognized Testing Laboratory (NRTL) .......................................................................... No
Features:
1/2 in. Tailstock Square Drive Lock-Down to Use Torque Wrench for Precise Positioning
Min. Gun Barrel Length Through Spindle w/4-Jaw Chuck - 23" (Allowing for Barrel Sticking Out for Threading)
Removable Bed Gap
Quick-Change Spindle Speed and Gearbox Controls
On/Off/Reverse Spindle Switch on Carriage
LED Work Light
Steady and Follow Rests with Roller Bearing Supports
Outboard Spindle Support Spider
Cast-Iron Stand with Extended Base
Cast-Aluminum End-Gear Cover
Accessories Included:
6 in. 3-Jaw Chuck with 2-Piece Reversible Jaws
8 in. 4-Jaw Chuck with Reversible Jaws
10 in. Faceplate
Steady and Follow Rests with Roller Bearing Supports
MT#3 Live Center
(2) MT#3 Dead Centers (1 Carbide Tipped)
Quick-Change Tool Post with 1 Tool Holder
Set of 6 Change Gears
Toolbox
Accessories Recommended:
T26300 Taper Attachment for G0750G
The information contained herein is deemed accurate as of 6/27/2017 and represents our most recent product specifications.
Model G0750G
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
Model G0750G (Mfd. Since 5/15)
PAGE 3 OF 3
-9-