Section 5: Accessories - Grizzly G0750G Owner's Manual

ACCESSORIES

SECTION 5: ACCESSORIES

Installing unapproved accessories may
cause machine to malfunction, resulting in
serious personal injury or machine damage.
To reduce this risk, only install accessories
recommended for this machine by Grizzly.
NOTICE
Refer to our website or latest catalog for
additional recommended accessories.
T23962—ISO 68 Moly-D Machine Oil, 5 gal.
T23963—ISO 32 Moly-D Machine Oil, 5 gal.
Moly-D oils are some of the best we've found for
maintaining the critical components of machinery
because they tend to resist run-off and maintain
their lubricity under a variety of conditions—as
well as reduce chatter or slip. Buy in bulk and
save with 5-gallon quantities.
T23962
Figure 89. ISO 68 and ISO 32 machine oil.
T23964—Armor Plate w/Moly-D Multi-Purpose
Grease, 14.5 oz.
A rich green moly grease that provides excellent
stability and unsurpassed performance under a
wide range of temperatures and conditions.
Figure 90. T23964 Armor Plate.
order online at
Model G0750G (Mfd. Since 5/15)
T23963
www.grizzly.com
T10295—7-Pc. Indexable Carbide Set 5/8"
This 7-piece turning tool set is ideal for just about
any project. Supplied with right hand and left
hand turning/facing tool holders, the set is com-
plimented with one threading and cut-off tool too.
Indexable inserts ensure cutting surfaces stay
sharp.
Figure 91. 17-Pc. Indexable Carbide Tool Set.
T10439—4-Pc. Carbide Insert CCMT Boring
Bar Set
These right-hand indexable solid steel Boring
Bars use ⁄ " and ⁄ ", 80° diamond inserts and
1 3
4 8
feature a negative 7° end and side cutting angle.
Includes ⁄ " x 6", ⁄ " x 7",
3 1
8 2
boring bars. Set comes with Torx
fitted aluminum case with handle.
Figure 92. Carbide Insert CCMT Boring Bar Set.
T10556—Taper Attachment Kit for Model
G0750G
P0750G1216-3V3—LED Bulb 24V Bi-Pin
Replacement bulb for the Model G0750G work
light.
1-800-523-4777
or call
⁄ " x 8", and ⁄ " x 10"
5 3
8 4
wrenches and
®
-57-