OSEE PRM1014 User Manual page 61

PIN No. 6P6C
1 Rx-(data from external device)
2 GND(Data Common)
3 Tx+(data to external device)
4 Tx-(data to external device)
5 Not connected
6 Rx+(data from external device)
The connection should obey the rules below to set up the communication
between one of COM3~COM6 and RS485, as shown in Table 5.1-17:
Table 5.1-17 Connection Between COM3~COM6 of TSI-3000 and RS485
 Cable1
The connectors at the two ends of CABLE1 should be one male RJ45
connector and one Male 6P6C connector, as shown in Figure 5.1-34:
Table 5.1-16 The Pins of COM* in TSI-3000
of RMM1024
6P6C(COM3~COM6) RJ45(RS485)
1
3
2
5 (Not connected)
6
4
Figure 5.1-34 Cable1
Functionality of the Main Menu
Illustration
3
4
2
1(Not connected)
6
5
55