OSEE PRM1014 User Manual page 54

Functionality of the Main Menu
of the sub-item is shown in Table 5.1-11:
Table 5.1-11 The Description of FUNCTION KEY Menu Items
Items Default Value Domain Range
F1 SCAN
F2 SCAN
SCAN
1.
This product supports the following scan modes:
Set the function button as [SCAN], press the button continuously to
activate various scan modes.
 OVER: Zooms in/out of the image to 96% of its original size
without changing the aspect ratio.
 NORMAL: Zooms in/out of the image without changing the aspect
ratio.
 UNDER: Zooms in/out of the image without changing the aspect
ratio. Also, displays the data at the top of the horizontal blanking
block.
ASPECT: Set the aspect ratio of the screen as 4:3 or 16:9.
2.
FREEZE
3.
Active this function to freeze the current frame displayed, press the
function button again to release the freeze and continue to display.
BLUE ONLY
4.
It is to activate BLUE ONLY mode that will remove red and green from the
input signal and display the screen only under a blue signal.
MONO
5.
It is to activate MONO mode that will display the screen in monochrome
presentation, inactivate this mode to display the screen in color mode.
SCAN, NATIVE, ASPECT, BLUE
ONLY, MONO, MARKER, H/V
DELAY, AUDIO METER, FAST
MODE, TC, IMD, MUTE, PBP,
CC, FREEZE, WIN SELECT,
FOCUS ASSIST, LUMA ZOOM
CHECK, UNDEF
the same as F1
NORMAL OVER UNDER
48
Description
Set a function to
F1 button
Set a function to
F2 button