Installation - Electrolux EKC6461AOK User Manual

Problem
The lamp does not oper‐
ate.
The display shows "12.00". There was a power cut.
Steam and condensation
settle on the food and in
the cavity of the oven.
12.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service
centre is on the rating plate. The rating
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

13. INSTALLATION

WARNING!
Refer to Safety chapters.
13.1 Technical data
Dimensions
Height
Width
Depth
13.2 Location of the appliance
You can install your freestanding
appliance with cabinets on one or two
sides and in the corner.
Possible cause
The lamp is defective.
You left the dish in the
oven for too long.
894 - 912 mm
600 mm
600 mm
Remedy
Replace the lamp.
Reset the clock.
Do not leave the dishes in
the oven for longer than 15
- 20 minutes after the
cooking process ends.
plate is on the front frame of the
appliance cavity. Do not remove the
rating plate from the appliance cavity.
.........................................
.........................................
.........................................
A
Minimum distances
Dimension
A
B
ENGLISH
B
A
mm
2
685
23