Hood; Rear Cover - Baroness GM1700 Owner's Operating Manual

GM1700
Handling Instructions

Hood

Caution
Do not open the hood in strong winds.
Caution
Be careful not to pinch your fingers when you
open or close the hood.
1. Remove the bolt and nut.
2. Unlock the rubber catch, and then lift up the
hood.
5
2
1
2
3
4
5
3. Lift the hood and check that the hood
support rod is secured effectively.
Make sure that the hood will not close, and
then remove your hands.
A
1
A
B
Page 4-26
4
s2vhhj-002
Hood_001
Hood
Rubber catch
Intake
Bolt
Nut
1
B
Hood_002
Hood support rod
Secure
Released
4. To close the hood, release the hood support
rod, and then lower the hood slowly.
5. Lock the rubber catch securely.
6. Install the bolt and nut.
1
3

Rear Cover

3
Caution
Be careful not to pinch your fingers when you
open or close the cover.
1. Bring the seat to the most front position.
2. Remove the bolt on both sides of the rear
cover.
2
i5jb7e-006
3. Remove the rear cover.
1
3
2
Hood_003
1 Rubber catch
2 Bolt
3 Nut
1
5
4
3
Rear Cover_001
1 Rear cover
2 Bolt
3 Spring washer
4 Washer
5 Rubber washer
Operation of Each Section
i5jb7e-013
uemj7o-005