Clear The Accumulator; Display Tare - Rice Lake 880 Technical And Service Manual

4. Press to view the current accumulator value.
5. While the accumulator value is displayed, press
Note
The format of the print ouput can be configured using accumulator print format. See Section 7.0.

1.4.12 Clear the Accumulator

to enter the user setup mode, AUDIT is displayed.
MENU
1. Press
until ACCUM is displayed.
2. Press or
3. Press , then press
to clear the accumulator, CLEAR will display briefly and display returns to CLR Y .
TARE
4. Press
MENU
5. Press to return to the weigh mode.
The PRINT key only performs one accumulation. Weight must return to zero below the configured threshold
Note
value before another accumulation is allowed.
Threshold is configured in the setup menu, see Section 3.2.3.

1.4.13 Display Tare

When a stored Tare value is displayed, the Gross and Net LEDs will be off and the
stored tare:
MENU
1. Press .
2. Press to AUDIT.
3. Press to and press .
TARE
4. Press repeatedly to return to weighing mode.
If there is no tare in the system, the value displayed will be zero and the Gross and Net LED will be turned off.
See Section 9.12 for more information pertaining to the regulatory mode of operation.
8 880 Installation Manual
until CLR Y is displayed.
or
PRINT
to print the value.
will be lit. To display a