Table of Contents
Advertisement
R Setting the Multi Function Lock
By setting the <R> switch upward, you can prevent the settings
from being changed by accidentally operating the Main Dial, Quick
Control Dial, or Multi-controller or by inadvertently tapping on the touch
screen.
For details on the Multi function lock switch, see page 59.
When the <R> switch is set upward and you try to operate one of
the locked camera controls, <L> will be displayed in the viewfinder and
on the LCD panel. On the Quick Control screen (p.61), [LOCK] will be
displayed. During Live View or movie shooting, [LOCK] will be displayed
on the shooting screen.
By default, the <5> dial will be locked when the multi function lock
switch is in the lock position.
In Basic Zone modes, only [hTouch control] is settable.
You can operate the Quick Control (p.61) regardless of the Multi function
lock setting.
If it is changed from the default setting, an asterisk "*" will be displayed
on the right edge of [54: Multi function lock].
88
Select [Multi function lock].
1
Under the [54] tab, select [Multi
function lock], then press <0>.
Add a checkmark [X] to the
2
camera control to be locked.
Select a camera control and press
<0> to add a checkmark [X].
Select [OK].
When the <R> switch is set
upward, the checkmarked [X]
camera controls will be locked.
Advertisement
Table of Contents
