Table of Contents
Advertisement
If the exposure obtained in step 1 differs greatly from the standard
exposure, a correct white balance may not be obtained.
In step 3, the following images cannot be selected: Images captured with
the Picture Style set to [Monochrome], multiple-exposure images,
cropped images, and images shot with another camera.
Instead of shooting a white object, you can also shoot a gray chart or
standard 18% gray reflector (commercially-available).
Select [White balance].
4
Under the [z2] tab, select [White
balance], then press <0>.
Select the custom white balance.
5
Select [
O
B: Setting the White BalanceN
], then press <0>.
189
Advertisement
Table of Contents
