Table of Contents
Advertisement
Shot images are not displayed when continuous shooting
is performed during Live View shooting.
If the image-recording quality is set to 41 or 61, the shot
images are not displayed during continuous shooting (p.291).
During movie shooting, the red E icon is displayed.
It indicates that the camera's internal temperature is high. If the
red <E> icon is displayed, it indicates that the movie shooting will
soon stop automatically (p.382).
Movie shooting stops by itself.
If the card's writing speed is slow, movie shooting may stop
automatically. For cards that can record movies, see page 343. To
find out the card's writing speed, refer to the card manufacturer's
Web site, etc.
If you shoot a movie for 29 min. 59 sec., the movie shooting will
stop automatically.
The ISO speed cannot be set for movie shooting.
In shooting modes other than <a>, the ISO speed is set
automatically. In the <a> mode, you can manually set the ISO
speed (p.331).
ISO 100 cannot be set or ISO speed expansion cannot
be selected during movie shooting.
If [z3: Highlight tone priority] is set to [Enable], the settable
ISO speed range will start from ISO 200. Even if you expand the
setting range with [ISO speed range], you cannot select H1 or
H2. When [z3: Highlight tone priority] is set to [Disable]
(p.199), you can set ISO 100/125/160 or an expanded ISO speed.
Troubleshooting Guide
557
Advertisement
Table of Contents
