Canon EOS 6D Mark II Function Instruction Manual
  1. Manuals
  2. Brands
  3. Canon Manuals
  4. Digital Camera
  5. EOS 6D Mark II
  6. Function instruction manual

Canon EOS 6D Mark II Function Instruction Manual

Wi-fi instruction manual
Hide thumbs Also See for EOS 6D Mark II:
Table of Contents

Advertisement

Quick Links

Wi-Fi (Wireless Communication) Function
Instruction Manual
ENGLISH
INSTRUCTION
MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Canon EOS 6D Mark II

Summary of Contents for Canon EOS 6D Mark II

  • Page 1 Wi-Fi (Wireless Communication) Function Instruction Manual ENGLISH INSTRUCTION MANUAL...

  • Page 2: Introduction

    Canon cannot be held liable for any other loss or damage caused by use of the camera. When using wireless communication functions, establish appropriate security at your own risk and discretion. Canon cannot be held liable for any loss or damage caused by unauthorized access or other security breaches.
  • Page 3 In this manual and on the camera’s LCD monitor, “smartphone” refers to smartphones and tablets. (2) z Send images between cameras (p.59) Connect this camera and other Canon cameras with built-in wireless communication functions via Wi-Fi and send images between them. (3) Save images to Connect Station (p.71) Hold the camera close to Connect Station (sold separately) to connect to it via Wi-Fi and save images to it.
  • Page 4 Introduction  Wi-Fi Connection Using the Bluetooth Function This camera can be connected easily to a smartphone compatible with Bluetooth low energy technology* via Wi-Fi. For details, see page 18. * Hereafter referred to as “Bluetooth”. Wi-Fi Connection Using the NFC Function This camera is compatible with NFC (Near Field Communication) that enables you to easily establish a Wi-Fi connection between the camera and a smartphone or Connect Station (sold separately).

  • Page 5: Conventions Used In This Manual

    Conventions Used in This Manual In this manual, the term “access point” indicates wireless LAN  routers, etc. that relay Wi-Fi connections. The camera does not come with an interface cable.  Icons in this Manual <6> : Indicates the Main Dial. <5>...

  • Page 6: Structure Of This Manual

    Structure of This Manual This manual is structured as follows. After finishing preparation for a Wi-Fi connection in “Getting Started”, see the corresponding pages to set up a Wi-Fi connection according to your needs. Getting Started (p.11) Connecting to a Smartphone Advanced Wi-Fi via Wi-Fi (p.15) Connection (p.107)

  • Page 7: Table Of Contents

    Contents Introduction What You Can Do Using the Wi-Fi (Wireless Communication) Functions ..................2 Conventions Used in This Manual ........... 5 Structure of This Manual ..............6 Getting Started Setting Wi-Fi Settings ..............12 Connecting to a Smartphone via Wi-Fi Selecting the Wi-Fi Connection Method ......... 16 Preparation for Smartphones ............17 Connecting to a Bluetooth-compatible Smartphone via Wi-Fi ..
  • Page 8 Contents Connecting to EOS Utility via Wi-Fi Establishing a Wi-Fi Connection ............ 76 Operating the Camera Using EOS Utility ........80 Connecting to a Printer via Wi-Fi Establishing a Wi-Fi Connection ............ 82 Printing Images ................84 Print Settings ................. 87 Sending Images to a Web Service Preparation for Web Services ............
  • Page 9 Contents Troubleshooting Guide Responding to Error Messages ........... 138 Troubleshooting Guide ..............151 Wireless Communication Function Notes ........153 Security ..................155 Checking Network Settings ............156 Reference [Wireless communication settings] Screen ........158 [Wi-Fi settings] Screen ..............159 Virtual Keyboard Operation ............160 Setting up the IP Address Manually ..........161 Wireless Communication Status ..........

  • Page 11: Getting Started

    Getting Started This section describes how to prepare a Bluetooth connection or Wi-Fi connection.

  • Page 12: Setting Wi-Fi Settings

    Setting Wi-Fi Settings First, follow the steps below to set the Wi-Fi settings. Select [Wireless communication settings]. Press the <M> button, select  [Wireless communication settings] under the [51] tab, then press <0>. Select [Wi-Fi settings]. Select [Wi-Fi]. Select [Enable].
  • Page 13 Setting Wi-Fi Settings Register [Nickname]. When the screen on the left appears,  press <0>.  The screen on the left will appear. When using the displayed nickname,  press the <M> button. Otherwise, enter any characters  between 1 to 8 characters in length. For instructions on entering characters, see page 160.
  • Page 14 Setting Wi-Fi Settings [51: Wireless communication settings] cannot be selected when the  multiple exposure, video snapshot, or time-lapse movie mode is set. Interface Cable Connection Cautions With a Wi-Fi connection established, you cannot use the camera by  connecting it to Connect Station, a computer, or another device with an interface cable.

  • Page 15: Connecting To A Smartphone Via Wi-Fi

    Connecting to a Smartphone via Wi-Fi This section describes how to directly connect the camera to a smartphone via Wi-Fi. Connecting to a smartphone via Wi-Fi enables you to perform the following: • View images stored in the camera on a smartphone or save viewed images to a smartphone.

  • Page 16: Selecting The Wi-Fi Connection Method

    Selecting the Wi-Fi Connection Method You can select the following Wi-Fi connection methods according to the functions and usage status of the smartphone. Connecting to a Bluetooth-compatible Smartphone via Wi-Fi (p.18) By connecting to a Bluetooth-compatible smartphone via Bluetooth  in advance, you can connect via Wi-Fi simply by performing an operation on the camera and smartphone.

  • Page 17: Preparation For Smartphones

    Preparation for Smartphones To connect the camera to a smartphone, a smartphone on which Android or iOS is installed is necessary. In addition, the dedicated application Camera Connect (free of charge) must be installed on the smartphone. When an NFC-compatible smartphone is touched to the camera ...

  • Page 18: Connecting To A Bluetooth-Compatible Smartphone Via Wi-Fi

    Connecting to a Bluetooth-compatible Smartphone via Wi-Fi This section describes how to use the Bluetooth function to connect to a Bluetooth-compatible smartphone via Wi-Fi. Bluetooth Connection When you connect the camera to a Bluetooth-compatible smartphone via Bluetooth, you can establish a Wi-Fi connection by operating only the camera or the smartphone.
  • Page 19 Connecting to a Bluetooth-compatible Smartphone via Wi-Fi Establishing a Bluetooth Connection Operation on the Camera-1 Select [Wireless communication settings]. Press the <M> button, select  [Wireless communication settings] under the [51] tab, then press <0>. Select [Bluetooth function]. Select [Bluetooth function].
  • Page 20 Connecting to a Bluetooth-compatible Smartphone via Wi-Fi Select [Smartphone].  <x> will be displayed on the camera’s LCD panel. Select [Pairing]. Select [Do not display]. If Camera Connect is already  installed, select [Do not display] and press <0>. If Camera Connect is not installed, ...
  • Page 21 Connecting to a Bluetooth-compatible Smartphone via Wi-Fi Operation on the Smartphone Enable the Bluetooth function. Enable the Bluetooth function on the  settings screen of the smartphone. Start Camera Connect. Tap on the Camera Connect icon to  start the application. Select the camera to pair with.
  • Page 22 Connecting to a Bluetooth-compatible Smartphone via Wi-Fi Operation on the Camera-2 Select [OK]. Press <0>. Pairing will complete and the camera  will be connected to the smartphone via Bluetooth.  An illustration indicating that a Bluetooth connection has been established will appear on the main window of Camera Connect.
  • Page 23 Connecting to a Bluetooth-compatible Smartphone via Wi-Fi Establishing a Wi-Fi Connection When a Bluetooth connection is established, follow the steps below to establish a Wi-Fi connection. Android Select a Camera Connect function. Select the Camera Connect function  you want to use. For the Camera Connect functions, ...
  • Page 24 Connecting to a Bluetooth-compatible Smartphone via Wi-Fi Select a Camera Connect function. Select the Camera Connect function  you want to use. For the Camera Connect functions,  see page 38. Check the SSID and password. SSID (network name) Check the SSID (network name) and ...
  • Page 25 Connecting to a Bluetooth-compatible Smartphone via Wi-Fi  The [qWi-Fi on] screen will appear on the camera’s LCD monitor.  An illustration indicating that a Wi-Fi connection has been established will appear on the main window of Camera Connect. The Wi-Fi connection to a Bluetooth-compatible smartphone is now complete.
  • Page 26 Connecting to a Bluetooth-compatible Smartphone via Wi-Fi [Bluetooth function] Screen On the [Bluetooth function] screen, you can change or check the Bluetooth function settings. Bluetooth function Select the device to pair with the  camera. If you will not use the Bluetooth ...
  • Page 27 Connecting to a Bluetooth-compatible Smartphone via Wi-Fi Removing a Paired Device’s Registration To pair the camera with another smartphone, remove the currently paired device’s registration. Operation on the Camera Select [Check/clear connection info]. On the [Bluetooth function] screen  (p.19), select [Check/clear connection info], then press <0>.

  • Page 28: Connecting To An Nfc-Compatible Smartphone Via Wi-Fi

    Connecting to an NFC-compatible Smartphone via Wi-Fi An NFC-compatible smartphone can be connected via Wi-Fi by touching it to the camera. This section describes how to connect to an NFC-compatible smartphone via Wi-Fi. Smartphones labeled with the p mark are NFC-compatible. ...
  • Page 29 Connecting to an NFC-compatible Smartphone via Wi-Fi When touching the smartphone to the camera, be careful not to drop the  camera or smartphone. Do not touch the smartphone to the camera with too much force. Doing  so can scratch the camera or smartphone. Just holding the smartphone close to the camera may not establish a ...
  • Page 30 Connecting to an NFC-compatible Smartphone via Wi-Fi Establishing a Wi-Fi Connection Enable the NFC function on the camera and smartphone (p.159) Touch a smartphone to the camera. If the download site of Camera  Connect appears on the smartphone, install Camera Connect (p.38). If an image is being played back on ...
  • Page 31 Connecting to an NFC-compatible Smartphone via Wi-Fi Establish a Wi-Fi connection.  When a connection is established, the screen on the left will appear on the camera’s LCD monitor. When connecting to the same smartphone via NFC, this screen will not appear again.
  • Page 32 Connecting to an NFC-compatible Smartphone via Wi-Fi  The main window of Camera Connect will be displayed on the smartphone. The Wi-Fi connection to a smartphone is now complete.  Operate the camera using Camera Connect. See page 38. For how to terminate the Wi-Fi connection, see “Terminating the ...

  • Page 33: Connecting To A Smartphone Via Wi-Fi From The [Wi-Fi Function] Menu

    Connecting to a Smartphone via Wi-Fi from the [Wi-Fi function] Menu Operation on the Camera-1 Select [Wi-Fi function]. Select [Wi-Fi function] on the  [Wireless communication settings] screen, then press <0>. Select [q] (Connect to smartphone). If the history (p.126) is displayed, ...
  • Page 34 Connecting to a Smartphone via Wi-Fi from the [Wi-Fi function] Menu Select [Do not display]. If Camera Connect is already  installed, select [Do not display] and press <0>. If Camera Connect is not installed,  select [Android] or [iOS] on the screen on the left, scan the displayed QR code with the smartphone, then access Google Play or the App Store...
  • Page 35 Connecting to a Smartphone via Wi-Fi from the [Wi-Fi function] Menu Operation on the Smartphone Operate the smartphone to Smartphone’s screen (sample) establish a Wi-Fi connection. Activate the smartphone’s Wi-Fi  function, then select the SSID (network name) checked in step 5. For the password, enter the password ...
  • Page 36 Connecting to a Smartphone via Wi-Fi from the [Wi-Fi function] Menu Operation on the Camera-2 Establish a Wi-Fi connection.  When a connection is established, the screen on the left will appear on the camera’s LCD monitor. To specify viewable images, press the ...
  • Page 37 Connecting to a Smartphone via Wi-Fi from the [Wi-Fi function] Menu  The main window of Camera Connect will be displayed on the smartphone. The Wi-Fi connection to a smartphone is now complete.  Operate the camera using Camera Connect. See page 38. For how to terminate the Wi-Fi connection, see “Terminating the ...

  • Page 38: Operating The Camera Using A Smartphone

    Operating the Camera Using a Smartphone You can use a smartphone with Camera Connect installed to view images stored in the camera or perform remote shooting, etc. Camera Connect Main Window The main functions of Camera Connect are described below. Images on camera Images stored in the camera can be ...
  • Page 39 Operating the Camera Using a Smartphone If the Wi-Fi connection is terminated while recording a movie with remote  shooting, the following will occur. ● If the Live View shooting/Movie shooting switch is set to <k>, movie shooting will continue. ●...

  • Page 40: Terminating The Wi-Fi Connection

    Terminating the Wi-Fi Connection To terminate the Wi-Fi connection, perform either of the following operations. On the smartphone’s Camera Connect screen, tap on [ On the camera’s [qWi-Fi on] screen, select [Disconnect,exit]. If the [q Wi-Fi on] screen is not ...

  • Page 41: Sending Images To A Smartphone From The Camera

    Sending Images to a Smartphone from the Camera You can use the following methods to send images to a smartphone from the camera. (1) Selecting [Send images to smartphone] to send images (2) Sending images from the Quick Control screen during playback (p.43) (3) Using the NFC function to send images during image playback (p.45) (1) Selecting [Send images to smartphone] to Send Images...
  • Page 42 Sending Images to a Smartphone from the Camera Select an image to send. Turn the <5> dial to select an image  to send, then press <0>. By pressing the <1> button and  turning the <6> dial counterclockwise, you can switch to the index display and select an image.
  • Page 43 Sending Images to a Smartphone from the Camera (2) Sending Images from the Quick Control Screen During Playback Send images from the Quick Control screen during playback. Connect the camera to a smartphone via Bluetooth (Android only) or Wi-Fi (p.23) Play back the image.
  • Page 44 Sending Images to a Smartphone from the Camera Select an image to send. Turn the <5> dial to select an image  to send, then press <0>. By pressing the <1> button and  turning the <6> dial counterclockwise, you can switch to index display and select an image.
  • Page 45 Sending Images to a Smartphone from the Camera (3) Using the NFC Function to Send Images During Image Playback By touching an NFC-compatible smartphone to the camera while playing back an image on the camera, you can establish a Wi-Fi connection automatically and send the image to the smartphone even if a Bluetooth or Wi-Fi connection has not been established beforehand.
  • Page 46 Sending Images to a Smartphone from the Camera Select [Send img shown]. To select a size at which to send the  image, select [Resize image] and press <0>. Select [Send img shown] and press  <0> to send the image displayed. ...
  • Page 47 Sending Images to a Smartphone from the Camera Sending Multiple Images You can send multiple images at a time. If the multiple image selection screen is already displayed, start the operation from step 3. Selecting Multiple Images to Send Press <0>. Select [Send selected].
  • Page 48 Sending Images to a Smartphone from the Camera Select [Resize image]. Set it as necessary.  On the displayed screen, select an  image size, then press <0>. Select [Send].  The images will be sent. When the transfer is complete, the screen for step 1 will reappear.
  • Page 49 Sending Images to a Smartphone from the Camera Sending a Specified Range of Images Specify the range of images to send all the images in the range at once. Press <0>. Select [Send range]. Specify the range of images. Select the first image (start point), ...
  • Page 50 Sending Images to a Smartphone from the Camera Confirm the range. Press the <Q> button.  Select [Resize image]. Set it as necessary.  On the displayed screen, select an  image size, then press <0>. Select [Send].  The images will be sent. When the transfer is complete, the screen for step 1 will reappear.
  • Page 51 Sending Images to a Smartphone from the Camera Sending All Images on the Card Send all the images on the card at once. Press <0>. Select [Send all card]. Select [Resize image]. Set it as necessary.  On the displayed screen, select an ...
  • Page 52 Sending Images to a Smartphone from the Camera Sending Images that Match the Search Conditions Send all the images that match the search conditions set in [Set image search conditions] at once. For [Set image search conditions], refer to “Filtering Images for Playback”...
  • Page 53 Sending Images to a Smartphone from the Camera Ending Image Transfer When You Send Images by Operating the Camera while Connected via Bluetooth (Android Only) When You Use the NFC Function to Send Images During Image Playback Press the <M> button on the ...
  • Page 54 Sending Images to a Smartphone from the Camera If necessary, also read “NFC Function Cautions” (p.29).  During the image transfer operation, a picture cannot be taken even if  the camera’s shutter button is pressed. Images cannot be sent using the NFC function while the camera is ...

  • Page 55: Specifying Viewable Images

    Specifying Viewable Images You can specify images viewable on a smartphone by operating the camera. Images can be specified after the Wi-Fi connection is terminated. Select [Wi-Fi function]. Select [Wi-Fi function] on the  [Wireless communication settings] screen, then press <0>. Select [q].
  • Page 56 Specifying Viewable Images Select [Viewable imgs]. Select an item. Select [OK] and press <0> to  display the setting screen. [All images] All images stored on the card become viewable. [Images from past days] Specify viewable images on the shooting-date basis. Images shot up to nine days ago can be specified.
  • Page 57 Specifying Viewable Images [Select by rating] Specify viewable images depending on whether a rating is appended (or not appended) or by the type of rating. Select a rating, then press <0> to  specify the viewable images. [File number range] (Select range) Select the first and last images from images arranged by the file number to...

  • Page 59: Connecting To Another Camera Via Wi-Fi

    Wi-Fi functions released in and after 2012 supporting image transfer between cameras. Note that the camera cannot be connected to Canon camcorders via Wi-Fi, even if they have built-in Wi-Fi functions. The camera can be connected to only one camera at a time.

  • Page 60: Establishing A Wi-Fi Connection

    Establishing a Wi-Fi Connection Select [Wi-Fi function]. Select [Wi-Fi function] on the  [Wireless communication settings] screen, then press <0>. Select [z] (Transfer imgs between cameras). If the history (p.126) is displayed,  switch the screen with the <Y> <Z> keys.
  • Page 61 Establishing a Wi-Fi Connection Select the images to send. Select images on the camera sending  the images (p.62). Do not operate the camera receiving  the images. Note that GPS information is not displayed on the camera’s playback screen even if GPS information is appended to the received image.

  • Page 62: Sending Images To The Other Camera

    Sending Images to the Other Camera Sending Images Individually Select and send images individually. Select an image to send. Turn the <5> dial to select an image  to send, then press <0>. By pressing the <1> button and  turning the <6>...
  • Page 63 Sending Images to the Other Camera Sending Multiple Selected Images Select multiple images to send them at once. Press <0>. Select [Send selected]. Select the images to send. Turn the <5> dial to select an image  to send, then press <0>. ...
  • Page 64 Sending Images to the Other Camera Select [Resize image]. Set it as necessary.  On the displayed screen, select an  image size, then press <0>. Select [Send].  The images will be sent. When the transfer is complete, the screen for step 1 will reappear.
  • Page 65 Sending Images to the Other Camera Sending a Specified Range of Images Specify the range of images to send all the images in the range at once. Press <0>. Select [Send range]. Specify the range of images. Select the first image (start point), ...
  • Page 66 Sending Images to the Other Camera Select [Resize image]. Set it as necessary.  On the displayed screen, select an  image size, then press <0>. Select [Send].  The images will be sent. When the transfer is complete, the screen for step 1 will reappear.
  • Page 67 Sending Images to the Other Camera Sending All Images on the Card Send all the images on the card at once. Press <0>. Select [Send all card]. Select [Resize image]. Set it as necessary.  On the displayed screen, select an ...
  • Page 68 Sending Images to the Other Camera Terminate the Wi-Fi connection. Press the <M> button to display  the confirmation dialog. Select [OK], then press <0> to terminate the Wi- Fi connection. Sending Images that Match the Search Conditions Send all the images that match the search conditions set in [Set image search conditions] at once.
  • Page 69 Sending Images to the Other Camera Select [Resize image]. Set it as necessary.  On the displayed screen, select an  image size, then press <0>. Select [Send].  The images will be sent. When the transfer is complete, the screen for step 1 will reappear.
  • Page 70 Sending Images to the Other Camera With a Wi-Fi connection established, a picture cannot be taken even if  the camera’s shutter button is pressed. To terminate the Wi-Fi connection during image transfer, select [Cancel] on the camera, then terminate the Wi-Fi connection. RAW images cannot be sent.

  • Page 71: Connecting To Connect Station Via Wi-Fi

    Connecting to Connect Station via Wi-Fi Connect Station (sold separately) is a device that allows you to import captured still photos and movies for viewing on your TV set, smartphone, etc., or sharing over a network. This section describes how to connect the camera and Connect Station (sold separately) via Wi-Fi using the NFC function to save still photos and movies.

  • Page 72: Saving Images

    Saving Images Hold the camera close to Connect Station. Turn on the camera and Connect  Station, then hold the camera’s p mark close to the Connect Station’s NFC connect point.  When a message indicating the Wi-Fi NFC connect point connection is being established is displayed on the camera’s LCD monitor and Connect Station...
  • Page 73 Saving Images If necessary, also read “NFC Function Cautions” (p.29).  While saving images, a picture cannot be taken even if the camera’s  shutter button is pressed. Do not drop the camera on Connect Station or touch the camera to it with ...

  • Page 75: Connecting To Eos Utility Via Wi-Fi

    Connecting to EOS Utility via Wi-Fi This section describes how to connect the camera directly to a computer via Wi-Fi. You can connect to a computer via Wi-Fi to remotely operate the camera using the EOS Utility (EOS software). Install EOS Utility on the computer before setting up a Wi-Fi ...

  • Page 76: Establishing A Wi-Fi Connection

    Establishing a Wi-Fi Connection Operation on the Camera-1 Select [Wi-Fi function]. Select [Wi-Fi function] on the  [Wireless communication settings] screen, then press <0>. Select [D] (Remote control (EOS Utility)). If the history (p.126) is displayed,  switch the screen with the <Y> <Z> keys.
  • Page 77 Establishing a Wi-Fi Connection Operation on the Computer-1 Select the SSID, then enter the Computer’s screen (sample) password. On the computer’s network setting  screen, select the SSID checked in step 4.  “_Canon0A” is displayed at the end of the SSID. For the password, enter the password ...
  • Page 78 Establishing a Wi-Fi Connection Operation on the Computer-2 Start EOS Utility. In EOS Utility, click [Pairing over Wi-Fi/LAN]. If a firewall-related message is  displayed, select [Yes]. Click [Connect]. Select the camera to connect to, then  click [Connect]. Operation on the Camera-3 Establish a Wi-Fi connection.
  • Page 79 Establishing a Wi-Fi Connection [DWi-Fi on] Screen Disconnect,exit Terminates the Wi-Fi connection.  Confirm set. You can check the settings.  Error details When a Wi-Fi connection error occurs, you can check the details of  the error. Press the <M> button to switch to the menu. The Wi-Fi connection to a computer is now complete.

  • Page 80: Operating The Camera Using Eos Utility

    Operating the Camera Using EOS Utility For EOS Utility operation procedures, refer to the EOS Utility Instruction Manual. In addition to remote shooting, various camera operations are available. For how to obtain the EOS Utility Instruction Manual, refer to the Camera Instruction Manual.

  • Page 81: Connecting To A Printer Via Wi-Fi

    Connecting to a Printer via Wi-Fi This section describes how to print images by directly connecting the camera to a printer via Wi-Fi. Set [Wi-Fi] to [Enable] on the [Wi-Fi settings] screen in  advance (p.12). To establish a Wi-Fi connection, operations on the printer ...

  • Page 82: Establishing A Wi-Fi Connection

    Establishing a Wi-Fi Connection Select [Wi-Fi function]. Select [Wi-Fi function] on the  [Wireless communication settings] screen, then press <0>. Select [l] (Print from Wi-Fi printer). If the history (p.126) is displayed,  switch the screen with the <Y> <Z> keys.
  • Page 83 Establishing a Wi-Fi Connection Operate the printer to connect it to the camera via Wi-Fi. On the Wi-Fi settings menu of the  printer to be used, select the SSID you have checked.  “_Canon0A” is displayed at the end of the SSID.

  • Page 84: Printing Images

    Printing Images Printing Images Individually Select and print images individually. Select an image to print. Turn the <5> dial to select an image  to print, then press <0>. By pressing the <1> button and  turning the <6> dial counterclockwise, you can switch to the index display and select an image.
  • Page 85 Printing Images Printing by Specifying the Options Print by specifying the printing options. Press <0>. Select [Print order].  The [Print order] screen will appear. Set the printing options. For the setting procedures, refer to  “Digital Print Order Format (DPOF)” in the Camera Instruction Manual.
  • Page 86 Printing Images Select [OK].  When printing is complete, the screen for step 3 will reappear. Terminate the Wi-Fi connection. Press the <M> button to display  the confirmation dialog. Select [OK], then press <0> to terminate the Wi- Fi connection. ...

  • Page 87: Print Settings

    Print Settings Specify settings for printing as necessary. The screen display and setting options vary depending on the printer. Some settings may not be available. For details, refer to the printer’s instruction manual. Sets the printing effects (p.89). Print setting screen Sets the date or file number imprinting to on or off (p.90).
  • Page 88 Print Settings Q Setting the Paper Size Select the size of the paper loaded in  the printer, then press <0>.  The paper type screen will appear. Y Setting the Paper Type Select the type of the paper loaded in ...
  • Page 89 Print Settings Setting the Printing Effects (Image Optimization) Contents displayed on the screen  vary depending on the printer. Select the option, then press <0>.  Select the desired printing effect, then  press <0>. Printing Effect Description Printing differs depending on the printer. For details, refer to the EDefault printer’s instruction manual.
  • Page 90 Print Settings Setting the Date/File Number Imprinting Select [ ], then press <0>.  Set the print settings as desired, then  press <0>. Setting the Number of Copies Select [ ], then press <0>.  Set the number of copies, then press ...
  • Page 91 Print Settings Cropping the Image You can crop the image and print only an enlarged version of the cropped portion, as if the image is recomposed. Set the cropping right before printing. If you change the print settings after setting the cropping, you may have to set the cropping again before printing.
  • Page 92 Print Settings Depending on the printer, the cropped image area may not be printed as  you specified. The smaller you make the cropping frame, the grainier the picture will  look in the print. Handling Printer Errors If printing does not resume after you resolve a printer error (no ink, no paper, etc.) and select [Continue], operate the buttons on the printer to resume printing.

  • Page 93: Sending Images To A Web Service

    Sending Images to a Web Service This section describes how to use Web services to send images. Set [Wi-Fi] to [Enable] on the [Wi-Fi settings] screen in  advance (p.12).

  • Page 94: Preparation For Web Services

    Preparation for Web Services Signing Up as a CANON iMAGE GATEWAY Member To send images to Web services, you need to sign up as a CANON iMAGE GATEWAY member (free of charge). Once you are a CANON iMAGE GATEWAY member, you can publish photos you took in online albums and use a range of services.
  • Page 95 Preparation for Web Services Specifying Settings to Use Web Services Start EOS Utility on the computer, log in to CANON iMAGE GATEWAY, then specify the camera’s settings to enable access to Web services. For details, refer to the EOS Utility Instruction Manual. For how to obtain the EOS Utility Instruction Manual, refer to the Camera Instruction Manual.

  • Page 96: Establishing A Wi-Fi Connection

    Establishing a Wi-Fi Connection Select [Wi-Fi function]. Select [Wi-Fi function] on the  [Wireless communication settings] screen, then press <0>. Select the Web service you have registered on page 95. If the history (p.126) is displayed,  switch the screen with the <Y> <Z> keys.

  • Page 97: Sending Images To A Web Service

    Sending Images to a Web Service You can share images with your family and friends by sending images from the camera to a Web service registered on the camera or by sending Web links of the online albums. Sending Images Individually Select and send images individually.
  • Page 98 Sending Images to a Web Service Sending Multiple Selected Images Select multiple images to send them at once. Press <0>. Select [Send selected]. Select the images to send. Turn the <5> dial to select an image  to send, then press <0>. ...
  • Page 99 Sending Images to a Web Service Select [Resize image]. Set it as necessary.  When YouTube is selected as the  destination, [Resize image] is not displayed. On the displayed screen, select an  image size, then press <0>. Select [Send]. ...
  • Page 100 Sending Images to a Web Service Sending a Specified Range of Images Specify the range of images to send all the images in the range at once. Press <0>. Select [Send range]. Specify the range of images. Select the first image (start point), ...
  • Page 101 Sending Images to a Web Service Select [Resize image]. Set it as necessary.  On the displayed screen, select an  image size, then press <0>. Select [Send].  The images will be sent. On the screen to complete the ...
  • Page 102 Sending Images to a Web Service Sending All Images on the Card Send all the images on the card at once. Press <0>. Select [Send all card]. Select [Resize image]. Set it as necessary.  On the displayed screen, select an ...
  • Page 103 Sending Images to a Web Service Select [Send].  The images will be sent. On the screen to complete the  process for sending the image, select [OK] to terminate the Wi-Fi connection and return to the screen to select a Web service. When the [Terms of use] screen is ...
  • Page 104 Sending Images to a Web Service Sending Images that Match the Search Conditions Send all the images that match the search conditions set in [Set image search conditions] at once. For [Set image search conditions], refer to “Filtering Images for Playback”...
  • Page 105 Sending Images to a Web Service Select [Send].  The images will be sent. On the screen to complete the  process for sending the image, select [OK] to terminate the Wi-Fi connection and return to the screen to select a Web service. When the [Terms of use] screen is ...
  • Page 106 RAW images cannot be sent.  When sending an image to a Web service other than CANON iMAGE  GATEWAY, a send error message may not be displayed even if the image has not been sent to the Web service successfully.

  • Page 107: Advanced Wi-Fi Connection

    Advanced Wi-Fi Connection This section mainly describes how to connect via Wi-Fi using an access point. Set [Wi-Fi] to [Enable] on the [Wi-Fi settings] screen in  advance (p.12). When connecting the camera to a smartphone via Wi-Fi,  make sure to install Camera Connect to the smartphone before specifying connection settings (p.17).
  • Page 108 (EOS Utility) Wi-Fi printer Web service Set the camera’s Wi-Fi settings (p.12) Install Camera • Register with Install EOS Connect on a CANON iMAGE Utility on a smartphone GATEWAY computer (p.17) (p.94) • Register Web services on the Connect each device to an access point camera (p.95)

  • Page 109: Checking The Type Of Access Point

    Checking the Type of Access Point To start with, check if the access point supports WPS* that allows easy Wi-Fi connection between Wi-Fi devices. If you do not know if the access point you use is WPS-compatible, refer to the access point instruction manual or other documentation. * Wi-Fi Protected Setup When WPS is supported ...

  • Page 110: Establishing A Wi-Fi Connection With Wps (Pbc Mode)

    Establishing a Wi-Fi Connection with WPS (PBC Mode) This is a Wi-Fi connection mode available when using an access point compatible with WPS. In pushbutton connection mode (PBC mode), the camera and the access point can be connected via Wi-Fi simply by pressing the WPS button on the access point.
  • Page 111 Establishing a Wi-Fi Connection with WPS (PBC Mode) Select [Register a device for connection]. Not displayed when a Web service is  selected in step 2. Proceed to step 5. When [q] (Connect to smartphone) is  selected, the screen on the left is displayed.
  • Page 112 Establishing a Wi-Fi Connection with WPS (PBC Mode) Select [WPS (PBC mode)]. Select [OK] and press <0> to go to  the next screen. Connect to the access point via Wi-Fi. Press the access point’s WPS button.  For details about where the button is located and how long to press it, refer to the access point’s instruction manual.
  • Page 113 Establishing a Wi-Fi Connection with WPS (PBC Mode) Specifying Settings for the Wi-Fi Function This section describes how to set the screens for the Wi-Fi function. Read the page that introduces the selected Wi-Fi function. qCommunicating with a Smartphone  Proceed to step 7 on page 35.

  • Page 114: Establishing A Wi-Fi Connection With Wps (Pin Mode)

    Establishing a Wi-Fi Connection with WPS (PIN Mode) This is a Wi-Fi connection mode available when using an access point compatible with WPS. In PIN code connection mode (PIN mode), an 8-digit identification number specified on the camera is set at the access point to establish a Wi-Fi connection.
  • Page 115 Establishing a Wi-Fi Connection with WPS (PIN Mode) Select [Register a device for connection]. Not displayed when a Web service is  selected in step 2. Proceed to step 5. When [q] (Connect to smartphone) is  selected, the screen on the left is displayed.
  • Page 116 Establishing a Wi-Fi Connection with WPS (PIN Mode) Specify the PIN code at the access point. At the access point, specify the 8-digit  PIN code displayed on the camera’s LCD monitor. For instructions on setting PIN codes  at the access point, refer to the access point’s instruction manual.
  • Page 117 Establishing a Wi-Fi Connection with WPS (PIN Mode) Specifying Settings for the Wi-Fi Function This section describes how to set the screens for the Wi-Fi function. Read the page that introduces the selected Wi-Fi function. qCommunicating with a Smartphone  Proceed to step 7 on page 35.

  • Page 118: Connecting To A Detected Network Manually Via Wi-Fi

    Connecting to a Detected Network Manually via Wi-Fi Establish a Wi-Fi connection by selecting the SSID (or ESS-ID) of the access point for a Wi-Fi connection from a list of active access points nearby. Selecting the Access Point Select [Wi-Fi function]. Select [Wi-Fi function] on the ...
  • Page 119 Connecting to a Detected Network Manually via Wi-Fi Select [Switch network]. Displayed when [q], [D], or [l] is  selected in step 2. Select an access point. (2) (3) Press the <W> <X> keys to select  the access point to connect to via Wi-Fi from the list of access points.
  • Page 120 Connecting to a Detected Network Manually via Wi-Fi Entering the Access Point Password Enter the password specified for the access point. For details on the  specified password, refer to the access point’s instruction manual. The screens displayed in steps 6 to 7 below vary depending on the ...
  • Page 121 Connecting to a Detected Network Manually via Wi-Fi Setting the IP Address Select [Auto setting]. Select [OK] and press <0> to  display the setting screen (p.122) for the Wi-Fi function selected in step 2. If [Auto setting] results in an error or ...
  • Page 122 Connecting to a Detected Network Manually via Wi-Fi Specifying Settings for the Wi-Fi Function This section describes how to set the screens for the Wi-Fi function. Read the page that introduces the selected Wi-Fi function. qCommunicating with a Smartphone  Proceed to step 7 on page 35.
  • Page 123 Connecting to a Detected Network Manually via Wi-Fi Send To Screen A screen to select a destination may be displayed depending on the Web service you select in [Wi-Fi function]. To register destinations or to specify the settings, you must use a computer.
  • Page 125 Reconnecting via Wi-Fi This section describes how to reconnect the camera to a device for which you have already established a Wi-Fi connection and how to register multiple connection settings.

  • Page 126: Reconnecting Via Wi-Fi

    Reconnecting via Wi-Fi Reconnect the camera via Wi-Fi to a device or Web service that you have connected to and registered connection settings for in the past. Select [Wi-Fi function]. Select [Wi-Fi function] on the  [Wireless communication settings] screen, then press <0>. Select an item.
  • Page 127 Reconnecting via Wi-Fi D EOS Utility Start EOS Utility on the computer.  If the computer’s connection destination has been changed,  restore the setting to connect via Wi-Fi to the camera or the same access point as the camera. ...

  • Page 128: Connecting To A Bluetooth-Connected Smartphone Via Wi-Fi

    Connecting to a Bluetooth-connected Smartphone via Wi-Fi With a Bluetooth connection established between the camera and a smartphone, follow the steps below to reconnect to the smartphone via Wi-Fi. Android Start Camera Connect. Tap on the Camera Connect icon on ...
  • Page 129 Connecting to a Bluetooth-connected Smartphone via Wi-Fi Start Camera Connect. Select a Camera Connect function. Check the SSID. Check the camera’s SSID (network  name) displayed on the smartphone. Operate the smartphone to Smartphone’s screen (sample) establish a Wi-Fi connection. On the smartphone’s Wi-Fi function ...

  • Page 130: Registering Multiple Connection Settings

    Registering Multiple Connection Settings You can register up to 20 connection settings for the Wi-Fi function. Select [Wi-Fi function]. Select [Wi-Fi function] on the  [Wireless communication settings] screen, then press <0>. Select an item. When the screen on the left appears, ...

  • Page 131: Checking And Operating Connection Settings

    Checking and Operating Connection Settings This section describes how to change or delete the connection settings, clear the wireless communication function settings, etc.

  • Page 132: Changing Or Deleting Connection Settings

    Changing or Deleting Connection Settings Change or delete connection settings saved on the camera. To change or delete the connection settings, terminate the Wi-Fi connection first. Select [Wi-Fi function]. Select [Wi-Fi function] on the  [Wireless communication settings] screen, then press <0>. Select an item.
  • Page 133 Changing or Deleting Connection Settings Check or change the connection settings. Select an item and press <0>, then  change or delete the connection settings on the displayed screen. Change device nickname (p.158) You can change the nickname using the virtual keyboard (p.160). Viewable imgs (p.55) Displayed when [q] (Connect to smartphone) is selected.

  • Page 134: Clearing Wireless Communication Settings To Default

    Clearing Wireless Communication Settings to Default All wireless communication settings can be deleted. By deleting the wireless communication settings, you can prevent them from being exposed when you lend or give your camera to other people. Select [Wireless communication settings]. Under the [51] tab, select [Wireless ...

  • Page 135: View Info Screen

    View Info Screen On the [View info] screen, you can check the error content and the MAC address of the camera. Select [Wi-Fi function]. Select [Wi-Fi function] on the  [Wireless communication settings] screen, then press <0>. Select an item, then press the <B>...

  • Page 137: Troubleshooting Guide

    Troubleshooting Guide...

  • Page 138: Responding To Error Messages

    Responding to Error Messages When an error occurs, display the details of the error by following one of the procedures below. Then, eliminate the cause of the error by referring to the examples shown in this chapter. On the [View info] screen, press <0> (p.135). ...
  • Page 139 Responding to Error Messages 11: Connection target not found In the case of [q], is Camera Connect running?  Establish a connection using Camera Connect (p.35).  In the case of [l], is the power of the printer on?  Turn on the printer.
  • Page 140 Responding to Error Messages 21: No address assigned by DHCP server What to check on the camera On the camera, IP address is set to [Auto setting]. Is this the  correct setting? If no DHCP server is used, specify the settings after setting the IP ...
  • Page 141 Responding to Error Messages 22: No response from DNS server What to check on the camera On the camera, does the DNS server’s IP address setting  match the server’s actual address? Set the IP address to [Manual setting]. Then, on the camera, set ...
  • Page 142 Responding to Error Messages 23: Device with same IP address exists on selected network What to check on the camera Do the camera and another device connected via Wi-Fi to the  same network have the same IP address? Change the camera’s IP address to avoid using the same address ...
  • Page 143 Responding to Error Messages 61: Selected SSID wireless LAN network not found Are any obstacles blocking the line of sight between the  camera and the antenna of the access point? Move the antenna of the access point to a position clearly visible ...
  • Page 144 Responding to Error Messages 63: Wireless LAN authentication failed Are the camera and the access point set to use the same  authentication method? The camera supports the following authentication methods: [Open  system], [Shared key], and [WPA/WPA2-PSK] (p.109). Are the camera and the access point set to use the same ...
  • Page 145 Responding to Error Messages 65: Wireless LAN connection lost Are any obstacles blocking the line of sight between the  camera and the antenna of the access point? Move the antenna of the access point to a position clearly visible ...
  • Page 146 Responding to Error Messages 68: Cannot connect to wireless LAN terminal. Retry from the beginning. Did you hold down the access point’s WPS (Wi-Fi Protected  Setup) button for the specified period of time? Hold down the WPS button for the period of time specified in the ...
  • Page 147 Responding to Error Messages 102: Could not send files Does the card in the camera to receive data have sufficient  space? Check the card in the camera to receive data. Replace the card or  make sufficient space available, then try sending the data again. Is the card in the camera to receive data locked? ...
  • Page 148 Responding to Error Messages 105: Could not receive files. Card’s write protect switch is set to lock Is the card in the camera to receive data locked?  Check the card in the camera to receive data. Release the lock, ...
  • Page 149 EOS software. Is the camera’s registration information or Web service  registered on the camera deleted on CANON iMAGE GATEWAY? Connect the camera and computer via Wi-Fi or with an interface  cable (sold separately) and reconfigure Web service settings using EOS Utility (p.95).
  • Page 150 Responding to Error Messages 127: An error has occurred A problem other than error code number 121 to 126 occurred  during the connection to the Web service. Try re-establishing the Wi-Fi connection to the Web service.  141: Printer is busy. Try connecting again. Is the printer performing a printing process? ...

  • Page 151: Troubleshooting Guide

    Troubleshooting Guide If a problem occurs with the camera, first refer to this Troubleshooting Guide. If this Troubleshooting Guide does not resolve the problem, contact the nearest Canon Service Center. A device connected with an interface cable cannot be used.
  • Page 152 Troubleshooting Guide Cannot pair with a smartphone. A previously paired smartphone cannot be paired with the camera  again if the camera’s registration is retained on the smartphone. In such a case, remove the camera’s registration retained in the Bluetooth settings on the smartphone and try pairing again (p.19).

  • Page 153: Wireless Communication Function Notes

    Wireless Communication Function Notes If the transmission rate drops, the connection is lost, or other problems occur when using the wireless communication functions, try the following corrective actions. Distance Between the Camera and the Smartphone If the camera is too far from the smartphone, a Wi-Fi connection may not be established even when Bluetooth connection is possible.
  • Page 154 Wireless Communication Function Notes Using an Eye-Fi Card When [Wi-Fi] is set to [Enable], image transfer using an Eye-Fi  card is disabled. Using the Wireless Remote Control BR-E1 When [Bluetooth function] is set to [Remote] to use the Wireless ...

  • Page 155: Security

    Security If security settings have not been properly set, the following problems may occur. Transmission monitoring  Third parties with malicious intent may monitor the Wi-Fi transmissions and attempt to acquire the data you are sending. Unauthorized network access  Third parties with malicious intent may gain unauthorized access to the network you are using to steal, modify, or destroy information.

  • Page 156: Checking Network Settings

    Checking Network Settings Windows  Open the Windows [Command Prompt], then type ipconfig/all and press the <Enter> key. In addition to the IP address assigned to the computer, the subnet mask, gateway, and DNS server information are also displayed. Mac OS ...

  • Page 157: Reference

    Reference...

  • Page 158: [Wireless Communication Settings] Screen

    [Wireless communication settings] Screen On the [Wireless communication settings] screen, you can change the wireless communication function settings. Press the <M> button, select [Wireless communication settings] under the [51] tab, then press <0>. Wi-Fi settings See the next page.  Wi-Fi function The following Wi-Fi functions are available:...

  • Page 159: [Wi-Fi Settings] Screen

    [Wi-Fi settings] Screen Wi-Fi You can set whether to [Enable] or  [Disable] the wireless communication function. When the use of electronic devices  and wireless devices is prohibited, such as on board airplanes or in hospitals, set it to [Disable]. NFC connection (p.28) You can set whether to [Enable] or...

  • Page 160: Virtual Keyboard Operation

    Virtual Keyboard Operation Changing the entry area  Press the <Q> button to toggle between the top and bottom entry areas. Moving the cursor  Press the <Y> <Z> keys in the top area to move the cursor. Entering text ...

  • Page 161: Setting Up The Ip Address Manually

    Setting up the IP Address Manually Set up the IP address settings manually. The items displayed vary depending on the Wi-Fi function. Select [Manual setting]. Select [OK] and press <0> to go to  the next screen. Select the item to be set. Select an item and press <0>.
  • Page 162 Setting up the IP Address Manually Select [OK]. When you have completed setting the  necessary items, select [OK] and press <0>.  The setting screen for the Wi-Fi function will appear (p.113). If you are not sure what to enter, see ...

  • Page 163: Wireless Communication Status

    Wireless Communication Status Wireless communication status can be checked on the camera’s LCD monitor and LCD panel. LCD monitor LCD panel Quick Control screen Information display screen during playback Wi-Fi function Bluetooth Wireless signal strength function Wi-Fi function Bluetooth function Wireless signal strength LCD monitor LCD panel...
  • Page 164 Wireless Communication Status Bluetooth Function Indicator Bluetooth function Connection status LCD monitor LCD panel Bluetooth connected Other than [Disable] Bluetooth not connected Bluetooth not [Disable] Not displayed Not displayed connected * Bluetooth is not connected with a Wi-Fi connection established. In Camera Connect Bluetooth connected Wi-Fi connected...

  • Page 165: Specifications

    Web service: registered Web services. Standards compliance: NFC Forum Type 3/4 Tag compliant (dynamic) Bluetooth Standards compliance: Bluetooth Specification Version 4.1 compliant (Bluetooth low energy technology) Transmission method: GFSK modulation All the data above is based on Canon’s testing standards. ...

  • Page 166: Wireless Communication Function Precautions

    To avoid violating wireless communication function regulations, visit the Canon website to check where use is allowed. Note that Canon cannot be held liable for any problems arising from wireless communication function use in other countries and regions. 9Model Number...
  • Page 167 The Bluetooth word mark and logos are registered trademarks owned by  Bluetooth SIG, Inc. and any use of such marks by Canon Inc. is under license. Other trademarks and trade names are those of their respective owners. The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in ...

  • Page 168: Index

    Camera access point mode ..123 Pairing ....... 20, 26, 27 Camera Connect....17, 38, 164 Password ..24, 34, 76, 82, 120, 159 CANON iMAGE GATEWAY ... 94 PictBridge........81 Clearing wireless communication PIN code connection mode ..114 settings ........
  • Page 169 Index Send images to smartphone ..41 Send image shown ... 42, 44, 46, 62, 97 Send range ...... 49, 65, 100 Send selected ....47, 63, 98 Sending all images on the card ....... 51, 67, 102 Sending images ..41, 43, 45, 62, 97 Sending images that match search conditions......
  • Page 170 Europe, Africa & Middle East CANON EUROPA N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands For your local Canon office, please refer to your warranty card or to www.canon-europe.com/Support The product and associated warranty are provided in European countries by Canon Europa N.V. CEL-SX1SA210...

Table of Contents