Page 1 INSTRUCTION MANUAL...
Page 2: Introduction
Introduction The EOS 60D is a high-performance, digital single-lens reflex camera featuring a fine-detail CMOS sensor with approx. 18.0 effective megapixels, DIGIC 4, high-precision and high-speed 9-point AF, approx. 5.3 fps continuous shooting, Live View shooting, and Full HD (Full High-Definition) movie shooting.
Page 3: Item Check List
Item Check List Before starting, check that all the following items have been included with your camera. If anything is missing, contact your dealer. Camera Battery Pack Battery Charger (with eyecup and LP-E6 LC-E6/LC-E6E* body cap) (with protective cover) Interface Cable Stereo AV Cable Wide Strap AVC-DC400ST...
Page 4: Conventions Used In This Manual
Conventions Used in this Manual Icons in this Manual <6> : Indicates the Main Dial. <5> : Indicates the Quick Control Dial. <9> <V> : Indicates the Multi-controller and the push direction. <0> : Indicates the setting button. 0, 9, 7, 8 : Indicates that the respective function remains active for 4 sec., 6 sec., 10 sec., or 16 sec.
Page 5: Chapters
Chapters For first-time DSLR users, Chapters 1 and 2 explain the camera’s basic operations and shooting procedures. Introduction Getting Started Basic Shooting Setting the AF and Drive Modes Image Settings Advanced Operations Flash Photography Shooting with the LCD Monitor (Live View Shooting) Shooting Movies Image Playback Post-Processing Images...
Page 6: Table Of Contents
Contents Introduction Item Check List....................3 Conventions Used in this Manual ..............4 Chapters ......................5 Index to Features .................... 10 Handling Precautions ..................12 Quick Start Guide .................... 14 Nomenclature ....................16 Getting Started Charging the Battery ..................24 Installing and Removing the Battery..............
Page 7 Contents Shoot by Lighting or Scene Type ..............71 Setting the AF and Drive Modes f: Selecting the AF Mode................76 S Selecting the AF Point ................78 When Autofocus Fails ..................80 MF: Manual Focusing ...................80 i Selecting the Drive Mode ................81 j Using the Self-timer ..................82 Image Settings Setting the Image-recording Quality..............84 i: Setting the ISO Speed................88...
Page 8 Contents Flash Photography D Using the Built-in Flash................130 Setting the Flash ................... 135 Using Wireless Flash..................139 External Speedlites ..................148 Shooting with the LCD Monitor (Live View Shooting) A Shooting with the LCD Monitor ............... 152 Shooting Function Settings ................156 z Menu Function Settings................
Page 9 Contents S Resize ......................222 R Processing RAW Images with the Camera ..........224 Sensor Cleaning f Automatic Sensor Cleaning ..............230 Appending Dust Delete Data................231 Manual Sensor Cleaning................233 Printing Images Preparing to Print ...................236 wPrinting......................238 Trimming the Image ..................243 W Digital Print Order Format (DPOF) ............245 W Direct Printing with DPOF ................248 Customizing the Camera Setting Custom Functions ................250...
Page 10: Index To Features
Index to Features Power White balance p.96 Battery Color space p.110 • Charging p.24 Image enhancement features • Battery check p.29 • Auto Lighting Optimizer p.101 • Battery information check p.268 • Lens peripheral illumination Power outlet p.272 correction p.102 •...
Page 11 Index to Features Image Playback Self-timer p.82 Remote control p.126 Image review time p.50 Single image display p.190 Exposure Adjustments • Shooting information Exposure compensation p.120 display p.191 Movie playback p.204 p.121 Editing out movie first/last AE lock p.122 scene p.206 Flash Index display...
Page 12: Handling Precautions
The camera is not waterproof and cannot be used underwater. If you accidentally drop the camera into water, promptly consult your nearest Canon Service Center. Wipe off any water droplets with a dry cloth. If the camera has been exposed to salty air, wipe it with a well-wrung wet cloth.
Page 13 Handling Precautions LCD Panel and LCD Monitor Although the LCD monitor is manufactured with very high precision technology with over 99.99% effective pixels, there might be a few dead pixels among the remaining 0.01% or less pixels. Dead pixels displaying only black or red, etc., are not a malfunction.
Page 14: Quick Start Guide
Quick Start Guide Insert the battery. (p.26) To charge the battery, see page 24. Attach the lens. (p.34) White index Red index Align the lens’ white or red index with the camera’s index in the matching color. Set the lens focus mode switch to <AF>.
Page 15 Quick Start Guide Flip out the LCD monitor. (p.27) Focus the subject. (p.40) Look through the viewfinder and aim the viewfinder center over the subject. Press the shutter button halfway, and the camera will focus the subject. If necessary, the built-in flash will pop- up automatically.
Page 16: Nomenclature
Nomenclature For detailed information, reference page numbers are provided in parentheses (p.**). <R> Drive mode <f> AF mode selection button (p.76) selection button (p.81) LCD panel (p.18) EF lens mount index (p.34) ISO speed setting button (p.88) Built-in flash/AF-assist beam (p.130/79) <n>...
Page 17 Nomenclature <A> Live View shooting/ AF start button Movie shooting button (p.152/172) (p.40, 153, 173) <V> Focal plane mark <A/I> <M> Menu button (p.46) AE lock/FE lock button/ Index/Reduce button Dioptric adjustment knob (p.39) (p.122/134/194/196, 243) Eyecup (p.124) <S/u> Viewfinder eyepiece AF point selection/ Magnify button...
Page 18: Lcd Panel
Nomenclature LCD Panel <A> Highlight tone priority (p.255) <g> ISO speed (p.88) ISO speed (p.88) Drive mode (p.81) u Single shooting Shots remaining o High-speed continuous Shots remaining shooting during WB bracketing i Low-speed continuous shooting Self-timer countdown Q 10 sec. Self-timer/ Bulb exposure time Remote control k 2 sec.
Page 19: Viewfinder Information
Nomenclature Viewfinder Information AF points (Superimposed display) Focusing screen Spot metering circle <g> ISO speed White balance correction <o> Focus < > Battery check confirmation light <A> AE lock/ Max. burst AEB in-progress <0> Monochrome <D> Flash-ready shooting Improper FE lock ISO speed warning <A>...
Page 20 Nomenclature Mode Dial Turn the Mode Dial while holding down the Mode Dial lock-release button at the center. w: Camera User Setting You can register the shooting Creative Zone mode (d/s/f/a/F), AF mode, menu settings, etc., in These modes give you more this Mode Dial setting and control for shooting various shoot (p.262).
Page 21 Nomenclature Lens Lens with a distance scale Focus mode switch (p.34) Hood mount (p.37) Zoom position index (p.35) Distance scale Filter thread (front of lens) (p.301) Zoom ring (p.35) Focusing ring (p.80, 167) Contacts (p.13) Lens mount index (p.34) Image Stabilizer switch (p.38) Lens without a distance scale Focusing ring (p.80, 167) Hood mount...
Page 22 Nomenclature Battery Charger LC-E6 Charger for Battery Pack LP-E6 (p.24). Power plug Battery pack slot Charge lamp IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS. DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS. For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet, if needed.
Page 23: Getting Started
Getting Started This chapter explains preparatory steps before you start shooting and basic camera operations. Attaching the Strap Pass the end of the strap through the camera’s strap mount eyelet from the bottom. Then pass it through the strap’s buckle as shown in the illustration.
Page 24: Charging The Battery
Charging the Battery Remove the protective cover. Attach the battery. As shown in the illustration, attach the battery securely to the charger. To detach the battery, follow the above procedure in reverse. Recharge the battery. LC-E6 For LC-E6 As shown by the arrow, flip out the battery charger’s prongs and insert the prongs into a power outlet.
Page 25 Charging the Battery Tips for Using the Battery and Charger Recharge the battery on the day before or on the day it is to be used. Even during storage, a charged battery will gradually drain and lose its power. After recharging the battery, detach it and detach the charger from the power outlet.
Page 26: Installing And Removing The Battery
Installing and Removing the Battery Installing the Battery Load a fully-charged Battery Pack LP-E6 into the camera. Open the battery compartment cover. Slide the lever as shown by the arrow and open the cover. Insert the battery. Insert the end with the battery contacts.
Page 27: Using The Lcd Monitor
Using the LCD Monitor After you flip out the LCD monitor, you can set menu functions, use Live View shooting, shoot movies, and playback images and movies. You can change the direction and angle of the LCD monitor. Flip out the LCD monitor. Rotate the LCD monitor.
Page 28: Turning On The Power
Turning on the Power If you turn on the power switch and the date/time setting screen appears, see page 30 to set the date/time. <1> : The camera turns on. <2> : The camera is turned off and does not operate. Set to this position when not using the camera.
Page 29: Checking The Battery Level
Turning on the Power Checking the Battery Level When the power switch is set to <1>, the battery level will be indicated in one of six levels: A blinking battery icon (b) indicates that the battery will be exhausted soon. Icon Level (%) 100 - 70 69 - 50 49 - 20 19 - 10 9 - 1...
Page 30: Setting The Date And Time
Setting the Date and Time When you turn on the power for the first time or if the date/time has been reset, the Date/Time setting screen will appear. Follow steps 3 and 4 to set the date/time. Note that the date/time appended to recorded images will be based on this date/time setting.
Page 31: Selecting The Interface Language
Selecting the Interface Language Display the menu. Press the <M> button to display the menu. Under the [6] tab, select [LanguageK]. Press the key on the <9> to select the [6] tab. Press the <V> key on the <9> to select [Language ] (the third item from the top), then press <0>.
Page 32: Installing And Removing The Sd Card
Installing and Removing the SD Card The camera is compatible with SD, SDHC, and SDXC memory cards. The captured images are recorded onto the card (sold separately). Make sure the card’s write-protect switch is set upward to enable writing/erasing. Installing the Card Open the cover.
Page 33: Removing The Card
Installing and Removing the SD Card Removing the Card Open the cover. Access lamp Set the power switch to <2>. Check that “Recording...” is not displayed on the LCD monitor. Make sure the access lamp is off, then open the cover. Remove the card.
Page 34: Attaching And Detaching A Lens
Attaching and Detaching a Lens Attaching a Lens Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrows. Attach the lens. White index Align the lens’ red or white index with the camera’s index matching the same color.
Page 35: Zoom
Attaching and Detaching a Lens Minimizing Dust When changing lenses, do it in a place with minimal dust. When storing the camera without a lens attached, be sure to attach the body cap to the camera. Remove dust on the body cap before attaching it. About Zooming To zoom, turn the zoom ring on the lens with your fingers.
Page 36 Attaching and Detaching a Lens To owners of the EF-S18-200mm f/3.5-5.6 IS lens: You can prevent the lens from extending out while you are carrying it around. Set the zoom ring to the 18mm wide-angle end, then slide the zoom ring lock lever to <LOCK>.
Page 37: Using The Lens Hood
Using the Lens Hood When a lens hood is attached to the lens, it can reduce image ghosting or flare by blocking stray light. The lens hood can also protect the front of the lens from raindrops, snow, dust, etc. Although the lens hood is usually sold separately, certain lens kit configurations have it included.
Page 38: About The Lens Image Stabilizer
About the Lens Image Stabilizer When you use the IS lens’ built-in Image Stabilizer, camera shake is corrected to obtain a less blurred shot. The procedure explained here is based on the EF-S18-135mm f/3.5-5.6 IS lens as an example. * IS stands for Image Stabilizer. Set the IS switch to <1>.
Page 39: Basic Operation
Basic Operation Adjusting the Viewfinder Clarity Turn the dioptric adjustment knob. Turn the knob left or right until the nine AF points in the viewfinder look sharp. If the camera’s dioptric adjustment still cannot provide a sharp viewfinder image, using Dioptric Adjustment Lens E (10 types, sold separately) is recommended.
Page 40: Shutter Button
Basic Operation Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing halfway This activates autofocusing and the automatic exposure system that sets shutter speed and aperture. The exposure setting (shutter speed and aperture) is displayed on the LCD panel and in the viewfinder (0).
Page 41: Mode Dial
Basic Operation Mode Dial Turn the Mode Dial while holding down the Mode Dial lock-release button at the center. Making Selections with the Main Dial (1) After pressing a button, turn the <6> dial. When you press a button such as <f>, <R>, or , the respective function remains selected for 6 seconds (9).
Page 42 Basic Operation Making Selections with the Quick Control Dial (1) After pressing a button, turn the <5> dial. When you press a button such as <f>, <R>, or , the respective function remains selected for 6 seconds (9). During this time, you can turn the <...
Page 43: Lcd Panel Illumination
Basic Operation Operating the Multi-controller Use it to select the AF point, correct the white balance, move the AF frame or the magnifying frame during Live View shooting, or scroll over the image during magnified view. You can push it in eight directions. For menus and the Quick Control screen, the Multi-controller works only in the <V>...
Page 44: Q Using The Quick Control Screen
Q Using the Quick Control Screen You can directly select and set the shooting functions displayed on the LCD monitor. This is called the Quick Control screen. Display the Quick Control screen. Press the <Q> button. The Quick Control screen will appear (7).
Page 45 Q Using the Quick Control Screen Quick Control Screen Nomenclature Picture Style (p.90) Aperture (p.116) Shutter speed (p.114) Highlight tone priority* (p.255) Shooting mode* (p.20) ISO speed (p.88) Drive mode (p.81) Exposure compensation/ AEB setting (p.121) Electronic level (p.127) Custom Controls Flash exposure (p.257) compensation...
Page 46: Menu Operations
Menu Operations With menus, you can set various functions such as the image-recording quality, date/time, etc. While looking at the LCD monitor, press the <M> button on the camera back to display the menu screen and use the <V> keys and < >...
Page 47 3 Menu Operations Menu Setting Procedure Display the menu screen. Press the <M> button to display the menu screen. Select a tab. Press the key to select a menu tab. Select the desired item. Press the <V> key to select the item, then press <0>.
Page 48: Before You Start
Before You Start 3 Formatting the Card If the card is new or was previously formatted by another camera or computer, format the card with the camera. When the card is formatted, all images and data in the card will be erased.
Page 49 Before You Start Execute [Format] in the following cases: The card is new. The card was formatted by a different camera or a computer. The card is full with images or data. A card-related error is displayed (p.291). About Low-level Formatting Do low-level formatting if the card’s recording or reading speed seems slow or if you want to totally erase all data in the card.
Page 50: Setting The Power-Off Time/Auto Power Off
Before You Start 3 Setting the Power-off Time/Auto Power Off You can change the auto power-off time for the camera to turn off automatically after a certain period of non-operation. If you do not want the camera to turn off automatically, set this to [Off]. After the power turns off, you can turn on the camera again by pressing the shutter button or other button.
Page 51: Reverting The Camera To The Default Settings
Before You Start 3 Reverting the Camera to the Default SettingsN The camera’s shooting settings and menu settings can be reverted to the default. Select [Clear all camera settings]. Under the [7] tab, select [Clear all camera settings], then press <0>. Select [OK].
Page 52 Before You Start Camera Settings Live View Shooting Settings Auto power off 1 min. Live View Enable shooting Beep Enable AF mode Live mode Release shutter Enable without card Grid display Image review 2 sec. Aspect ratio Highlight alert Disable Exposure Enable simulation...
Page 53: Basic Shooting
Basic Shooting This chapter explains how to use the Basic Zone modes on the Mode Dial for best results. With Basic Zone modes, all you do is point and shoot and the camera sets everything automatically (p.276). Also, to prevent botched pictures due to mistaken operations, major shooting settings cannot be changed in the fully-automatic modes.
Page 54: Fully Automatic Shooting
1 Fully Automatic Shooting Set the Mode Dial to <1>. Aim any AF point over the AF point subject. All the AF points will be used to focus, and generally the closest object will be focused. Aiming the center AF point over the subject will make focusing easier.
Page 55 1 Fully Automatic Shooting The focus confirmation light <o> blinks and focus is not achieved. Aim the AF point over an area having good contrast, then press the shutter button halfway (p.80). If you are too close to the subject, move away and try again.
Page 56: Full Auto Techniques
1 Full Auto Techniques Recomposing the Shot Depending on the scene, position the subject toward the left or right to create a balanced background and good perspective. In the <1> (Full Auto) mode, while you press the shutter button halfway to focus a still subject, the focus will be locked. You can then recompose the shot and press the shutter button completely to take the picture.
Page 57: Live View Shooting
1 Full Auto Techniques Live View Shooting By pressing the <A> button, you can shoot while viewing the image on the camera’s LCD monitor. This is called Live View shooting. For details, see page 151. Display the shooting image on the LCD monitor.
Page 58: Disabling Flash
7 Disabling Flash In places where flash photography is prohibited, use the <7> (Flash Off) mode. This mode is also effective for capturing the particular ambience of a scene, such as candlelight scenes. Shooting Tips If the numeric display in the viewfinder blinks, take care to prevent camera shake.
Page 59: C Creative Auto Shooting
C Creative Auto Shooting Unlike the <1> Full Auto mode where the camera sets everything, the <C> Creative Auto mode enables you to easily set the depth of field, drive mode, and flash firing. You can also choose the ambience you want to convey in your images. The default setting is the same as the <1>...
Page 60: Battery Check
C Creative Auto Shooting Shutter speed Aperture ISO speed Battery check Possible shots Image-recording quality Maximum burst (1) Shoot by ambience selection You can set the ambience you want to convey in your images. Press the key to select the desired ambience. You can also turn the <5>...
Page 61 C Creative Auto Shooting (3) Drive mode/Flash firing When you press <0>, the drive mode and flash firing setting screens will appear. Set as desired and press <0> to finalize the setting and return to the Quick Control screen. Drive mode: Turn the <6> dial to set it as desired. ...
Page 62: Shooting Portraits
2 Shooting Portraits The <2> (Portrait) mode blurs the background to make the human subject stand out. It also makes skin tones and the hair look softer than with the <1> (Full Auto) mode. Shooting Tips The farther the distance between the subject and background, the better.
Page 63: Shooting Landscapes
3 Shooting Landscapes Use the <3> (Landscape) mode for wide scenery, night scenes, or to have everything in focus from near to far. The greens and blues also become more vivid and sharper than with <1> (Full Auto). Shooting Tips With a zoom lens, use the wide-angle end.
Page 64: Shooting Close-Ups
4 Shooting Close-ups When you want to photograph flowers or small things up close, use the <4> (Close-up) mode. To make small things appear much larger, use a macro lens (sold separately). Shooting Tips Use a simple background. A simple background makes the flower, etc., stand out better. Move to the subject as close as possible.
Page 65: Shooting Moving Subjects
5 Shooting Moving Subjects To photograph a moving subject, whether it is a child running or a moving vehicle, use the <5> (Sports) mode. Shooting Tips Use a telephoto lens. Using a telephoto lens is recommended so you can shoot from afar. Use the center AF point to focus.
Page 66: Shooting Portraits At Night
6 Shooting Portraits at Night To shoot someone at night and obtain a natural-looking exposure in the background, use the <6> (Night Portrait) mode. Shooting Tips Use a wide-angle lens and a tripod. When using a zoom lens, use the wide-angle end to obtain a wide night view.
Page 67: Q Quick Control Screen
Q Quick Control Screen In Basic Zone modes, you can press the <Q> button to display the Quick Control screen. The table below indicates the functions that can be set with the Quick Control screen in each Basic Zone mode. For the setting procedure, see page 44.
Page 68: Shoot By Ambience Selection
Shoot by Ambience Selection Except in the <1> (Full Auto) and <7> (Flash Off) Basic Zone modes, you can select the ambience for shooting. 1 7 C 2 3 4 5 6 Ambience Ambience Effect k k k k k (1) Standard setting No setting k k k k k...
Page 69: Take The Picture
Shoot by Ambience Selection Set the ambience effect. Press the <V> key to select the effect bar so that [Effect] appears on the bottom. Press the key to select the desired effect. Take the picture. To shoot while the Live View image is displayed, press the shutter button.
Page 70 Shoot by Ambience Selection Ambience Settings (1) Standard setting Standard image characteristics for the respective shooting mode. Note that <2> has image characteristics geared for portraits and <3> is geared for landscapes. Each ambience is a modification of the respective shooting mode’s image characteristics. (2) Vivid The subject will look sharp and vivid.
Page 71: Shoot By Lighting Or Scene Type
Shoot by Lighting or Scene Type In the <2> (Portrait), <3> (Landscape), <4> (Close-up), and <5> (Sports) Basic Zone modes, you can shoot while the settings match the lighting or scene type. Normally, [Default setting] is adequate, but if the settings match the lighting condition or scene, the picture will look more accurate to your eye.
Page 72 Shoot by Lighting or Scene Type On the Quick Control screen, select the lighting or scene type. Press the <Q> button (7). Press the <V> key to select [Default setting]. [Shoot by lighting or scene type] will appear on the screen’s bottom.
Page 73 Shoot by Lighting or Scene Type Lighting or Scene Type Settings (1) Default setting The default setting. (2) Daylight For subjects under sunlight. Produces more natural-looking blue skies and greenery and reproduces light-colored flowers better. (3) Shade For subjects in the shade. Suitable for skin tones which may look too bluish or light-colored flowers.
Page 75: Setting The Af And Drive Modes
Setting the AF and Drive Modes The viewfinder has nine AF points. By manually selecting a suitable AF point, you can shoot with autofocus while composing the shot as desired. You can also select the AF mode and drive mode best matching the shooting conditions and subject.
Page 76: F: Selecting The Af Mode
f: Selecting the AF ModeN You can select the AF mode suiting the shooting conditions or subject. In Basic Zone modes, the most suitable AF mode is set automatically. On the lens, set the focus mode switch to <AF>. Set the Mode Dial to a Creative Zone mode.
Page 77: Ai Servo Af For Moving Subjects
f: Selecting the AF ModeN If focus cannot be achieved, the focus confirmation light <o> in the viewfinder will blink. If this occurs, a picture cannot be taken even if the shutter button is pressed completely. Recompose the picture and try to focus again.
Page 78: S Selecting The Af Point
S Selecting the AF Point N Select one of the nine AF points to autofocus. Note that in Basic Zone modes, you cannot select the AF point since it is selected automatically. Press the <S> button. The selected AF point will be displayed in the viewfinder and on the LCD panel.
Page 79 S Selecting the AF Point N If you prefer to look at the LCD panel while selecting the AF point, see the illustration below. Automatic selection , center right , top When using an EOS-dedicated external Speedlite, if focus cannot be achieved with the AF-assist beam, select the center AF point.
Page 80: When Autofocus Fails
When Autofocus Fails Autofocus can fail to achieve focus (the focus confirmation light <o> blinks) with certain subjects such as the following: Subjects difficult to focus Very low-contrast subjects (Example: Blue sky, solid-color walls, etc.) Subjects in very low light Extremely backlit or reflective subjects (Example: Car with a highly reflective body, etc.) Near and far subjects covered by an AF point...
Page 81: Selecting The Drive Mode
i Selecting the Drive ModeN Single and continuous drive modes are provided. In the <1> (Full Auto) mode, single shooting is set automatically. Press the <R> button. Select the drive mode. While looking at the LCD panel, turn the <6> or <5> dial. u : Single shooting When you press the shutter button completely, only one shot will be taken.
Page 82: Using The Self-Timer
j Using the Self-timer Use the self-timer when you want to be in the picture. The <Q> (10 sec. timer) can be used in all shooting modes. Press the <R> button. Select the self-timer. While looking at the LCD panel, turn the <6>...
Page 83: Image Settings
Image Settings This chapter explains image-related function settings: Image-recording quality, ISO speed, Picture Style, white balance, Auto Lighting Optimizer, lens peripheral illumination correction, etc. In Basic Zone modes, only the following can be set as described in this chapter: Image-recording quality, lens peripheral illumination correction, folder creation and selection, and image file numbering.
Page 84: Setting The Image-Recording Quality
Setting the Image-recording Quality You can select the pixel count and the image quality. There are eight JPEG image quality settings: 73/83/74/84/7a/8a/b/c. There are three RAW image quality settings: 1, 41, 61 (p.86) Select [Quality]. Under the [1] tab, select [Quality], then press <0>.
Page 85 7 (Fine) quality. Figures for the file size, possible shots, and maximum burst during continuous shooting are based on Canon’s testing standards (3:2 aspect ratio, ISO 100 and Standard Picture Style) using a 4GB card. These figures will vary depending on the subject, card brand, aspect ratio, ISO speed, Picture Style, Custom Functions, and other settings.
Page 86 3 Setting the Image-recording Quality If the image’s aspect ratio is different from the printing paper’s aspect ratio, the image may be cropped significantly if you print it as a borderless print. If the image is cropped, it may look more grainy on the paper due to the fewer number of pixels.
Page 87: Maximum Burst
3 Setting the Image-recording Quality Maximum Burst During Continuous Shooting The maximum burst during continuous shooting indicated on page 85 is the number of continuous shots that can be taken without stopping, based on a formatted 4GB card. The number is displayed on the bottom right in the viewfinder.
Page 88: I: Setting The Iso Speed
i: Setting the ISO SpeedN Set the ISO speed (image sensor’s sensitivity to light) to suit the ambient light level. In Basic Zone modes, the ISO speed is set automatically (p.89). Press the button. Set the ISO speed. While looking at the LCD panel or viewfinder, turn the <6>...
Page 89: Shooting
i: Setting the ISO SpeedN About “A” (Auto) ISO Speed If the ISO speed is set to “A”, the actual ISO speed to be set will be displayed when you press the shutter button halfway. As indicated below, the ISO speed will be set automatically to suit the shooting mode.
Page 90: A Selecting A Picture Style
A Selecting a Picture StyleN By selecting a Picture Style, you can obtain image effects matching your photographic expression or the subject. In Basic Zone modes, you cannot select the Picture Style. Select [Picture Style]. Under the [2] tab, select [Picture Style], then press <0>.
Page 91: About The Symbols
A Selecting a Picture StyleN S Neutral This Picture Style is for users who prefer to process images with their computer. For natural colors and subdued images. U Faithful This Picture Style is for users who prefer to process images with their computer.
Page 92: A Customizing A Picture Style
A Customizing a Picture StyleN You can customize a Picture Style by adjusting individual parameters like [Sharpness] and [Contrast]. To see the resulting effects, take test shots. To customize [Monochrome], see the next page. Select [Picture Style]. Under the [2] tab, select [Picture Style], then press <0>.
Page 93 A Customizing a Picture StyleN By selecting [Default set.] in step 3, you can revert the respective Picture Style to its default parameter settings. To shoot with the Picture Style you modified, follow step 2 on the preceding page to select the modified Picture Style and then shoot. Monochrome Adjustment For Monochrome, you can also set [Filter effect] and [Toning effect] in addition to [Sharpness] and [Contrast] explained on the preceding...
Page 94: A Registering A Picture Style
A Registering a Picture StyleN You can select a base Picture Style such as [Portrait] or [Landscape], adjust its parameters as desired and register it under [User Def. 1], [User Def. 2], or [User Def. 3]. You can create Picture Styles whose parameter settings such as for sharpness and contrast are different.
Page 95 A Registering a Picture StyleN Select a parameter. Select a parameter such as [Sharpness], then press <0>. Set the parameter. Press the key to adjust the parameter as desired, then press <0>. For details, see “Customizing a Picture Style” on pages 92-93. Press the <M>...
Page 96: Setting The White Balance
Setting the White BalanceN White balance (WB) is for making the white areas look white. Normally, the <Q> (Auto) setting will obtain the correct white balance. If natural- looking colors cannot be obtained with <Q>, you can select the white balance to match the light source or set it manually by shooting a white object.
Page 97: O Custom White Balance
3 Setting the White BalanceN O Custom White Balance Custom white balance enables you to manually set the white balance for a specific light source for better accuracy. Do this procedure under the actual light source to be used. Photograph a white object. The plain, white object should fill the spot metering circle.
Page 98: P Setting The Color Temperature
3 Setting the White BalanceN If the exposure obtained in step 1 is way off, a correct white balance might not be obtained. If the image was captured while the Picture Style was set to [Monochrome] (p.91) or if a Creative filter has been applied to the image (p.220), it cannot be selected in step 3.
Page 99: White Balance Correction
u White Balance CorrectionN You can correct the white balance that has been set. This adjustment will have the same effect as using a commercially-available color temperature conversion filter or color compensating filter. Each color can be corrected to one of nine levels. This is for advanced users who are familiar with using color temperature conversion or color compensating filters.
Page 100: Shooting
u White Balance CorrectionN White Balance Auto Bracketing With just one shot, three images having a different color balance can be recorded simultaneously. Based on the color temperature of the current white balance setting, the image will be bracketed with a blue/amber bias or magenta/green bias.
Page 101: Auto Lighting Optimizer
Auto Lighting OptimizerN If the image comes out dark or the contrast is low, the brightness and contrast can be corrected automatically. The default setting is [Standard]. With JPEG images, the correction is done when the image is captured. Select [Auto Lighting Optimizer]. Under the [2] tab, select [Auto Lighting Optimizer], then press <0>.
Page 102: Lens Peripheral Illumination Correction
Lens Peripheral Illumination Correction Due to the lens characteristics, the four corners of the picture might look darker. This is called lens light fall-off or drop in peripheral illumination. The default setting is [Enable]. Select [Peripheral illumin. correct.]. Under the [1] tab, select [Peripheral illumin.
Page 103: Shooting
Depending on shooting conditions, noise might appear on the image periphery. When using a non-Canon lens, setting the correction to [Disable] is recommended, even if [Correction data available] is displayed. Lens peripheral light correction is applied even when an Extender is attached.
Page 104: Creating And Selecting A Folder
Creating and Selecting a Folder You can freely create and select the folder where the captured images are to be saved. This is optional since a folder will be created automatically for saving captured images. Create a Folder Select [Select folder]. Under the [5] tab, select [Select folder], then press <0>.
Page 105: Selecting A Folder
3 Creating and Selecting a Folder Selecting a Folder With the folder selection screen Lowest file number displayed, select a folder and press Number of images <0>. in folder The folder where the captured images will be saved is selected. Subsequent captured images will be recorded into the selected folder.
Page 106: File Numbering Methods
File Numbering Methods The file number is like the frame number on a roll of film. The captured images are assigned a sequential file number from 0001 to 9999 and saved in one folder. You can change how the file number is assigned. The file number will appear on your computer in this format: IMG_0001.JPG.
Page 107: Shooting
3 File Numbering Methods Auto Reset The file numbering restarts from 0001 each time the card is replaced or a new folder is created. Whenever the card is replaced or a new folder created, the file numbering starts from 0001. This is convenient if you want to organize images according to cards or folders.
Page 108: Setting Copyright Information
Setting Copyright InformationN When you set the copyright information, it will be appended to the image as Exif information. Select [Copyright information]. Under the [7] tab, select [Copyright information], then press <0>. Select the desired option. Select [Enter author’s name] or [Enter copyright details], then press <0>.
Page 109 3 Setting Copyright InformationN Text Entry Procedure Changing the entry area Press the <Q> button to toggle between the top and bottom entry areas. Moving the cursor Press the key to move the cursor. Entering text In the bottom area, press the <V> or key to select a character, then press <0>...
Page 110: Setting The Color Space
Setting the Color SpaceN The color space refers to the range of reproducible colors. With this camera, you can set the color space for captured images to sRGB or Adobe RGB. For normal shooting, sRGB is recommended. In Basic Zone modes, sRGB is set automatically. Select [Color space].
Page 111: Advanced Operations
Advanced Operations In Creative Zone modes, you can set the shutter speed and/ or aperture to set the exposure as desired. By changing the camera settings, you can obtain various results. The M icon on the upper right of the page title indicates that the function can be used only in Creative Zone modes (d/ s/ f/ a/ F).
Page 112: D: Program Ae
d: Program AE The camera automatically sets the shutter speed and aperture to suit the subject’s brightness. This is called Program AE. * <d> stands for Program. * AE stands for Auto Exposure. Set the Mode Dial to <d>. Focus the subject. Look through the viewfinder and aim the selected AF point over the subject.
Page 113 d: Program AE If the “30"” shutter speed and the maximum aperture blink, it indicates underexposure. Increase the ISO speed or use flash. If the “8000” shutter speed and the minimum aperture blink, it indicates overexposure. Lower the ISO speed or use an ND filter (sold separately) to reduce the amount of light entering the lens.
Page 114: S: Shutter-Priority Ae
s: Shutter-Priority AE In this mode, you set the shutter speed and the camera automatically sets the aperture to obtain the standard exposure suiting the brightness of the subject. This is called shutter-priority AE. A faster shutter speed can freeze the action or moving subject. Or a slower shutter speed can create a blurred effect, giving the impression of motion.
Page 115 s: Shutter-Priority AE If the maximum aperture blinks, it indicates underexposure. Turn the <6> dial to set a slower shutter speed until the aperture stops blinking or set a higher ISO speed. If the minimum aperture blinks, it indicates overexposure. Turn the <6>...
Page 116: F: Aperture-Priority Ae
f: Aperture-Priority AE In this mode, you set the desired aperture and the camera sets the shutter speed automatically to obtain the standard exposure suiting the subject brightness. This is called aperture-priority AE. A higher f/number (smaller aperture hole) will make more of the foreground and background fall within acceptable focus.
Page 117: Depth Of Field Preview
f: Aperture-Priority AE If the “30"” shutter speed blinks, it indicates underexposure. Turn the <6> dial to set a larger aperture (smaller f/number) until the blinking stops or set a higher ISO speed. If the “8000” shutter speed blinks, it indicates overexposure.
Page 118: A: Manual Exposure
a: Manual Exposure In this mode, you set both the shutter speed and aperture as desired. To determine the exposure, refer to the exposure level indicator in the viewfinder or use a commercially-available exposure meter. This method is called manual exposure. * <a>...
Page 119: Selecting The Metering Mode
q Selecting the Metering ModeN You can select one of four methods to measure the subject brightness. In Basic Zone modes, evaluative metering is set automatically. Press the <n> button. Select the metering mode. While looking at the LCD panel, turn the <6>...
Page 120: Setting Exposure Compensation
Setting Exposure CompensationN Exposure compensation can brighten (increased exposure) or darken (decreased exposure) the standard exposure set by the camera. Although you can set the exposure compensation up to ±5 stops in 1/3- stop increments, the exposure compensation indicator on the LCD panel and in the viewfinder can only display the setting up to ±3 stops.
Page 121: Auto Exposure Bracketing (Aeb)
h Auto Exposure Bracketing (AEB)N By changing the shutter speed or aperture automatically, the camera brackets the exposure up to ±3 stops in 1/3-stop increments for three successive shots. This is called AEB. * AEB stands for Auto Exposure Bracketing. Select [Expo.
Page 122: A Ae Lock
A AE LockN Use AE lock when the area of focus is to be different from the exposure metering area or when you want to take multiple shots at the same exposure setting. Press the <A> button to lock the exposure, then recompose and take the shot.
Page 123: F: Bulb Exposures
F: Bulb Exposures When bulb is set, the shutter stays open as long as you hold down the shutter button completely, and closes when you let go of the shutter button. This is called bulb exposure. Use bulb exposures for night scenes, fireworks, the heavens, and other subjects requiring long exposures.
Page 124: Shooting
F: Bulb Exposures Using the Eyepiece Cover If you take a picture without looking at the viewfinder, light entering the eyepiece can throw off the exposure. To prevent this, use the eyepiece cover (p.23) attached to the camera strap. During Live View shooting and movie shooting, attaching the eyepiece cover is unnecessary.
Page 125: Mirror Lockup
Mirror LockupN Although using the self-timer or Remote Switch can prevent camera shake, using mirror lockup to prevent camera vibrations (mirror shock) can also help when you use a super telephoto lens or shoot close ups (macro photography). When [8C.Fn III -5: Mirror lockup] is set to [1: Enable], shooting with mirror lockup will be possible (p.257).
Page 126: R Remote Control Shooting
R Remote Control Shooting With Remote Controller RC-6 (sold separately), you can shoot remotely up to approx. 5 meters/16.4 feet from the camera. You can either shoot immediately or use a 2-sec. delay. You can also use Remote Controller RC-1 and RC-5. Focus the subject.
Page 127: Q Displaying The Electronic Level
Q Displaying the Electronic Level To help level the camera, the electronic level can be displayed on the LCD monitor, in the viewfinder, and on the LCD panel. Note that only the horizontal level will be displayed. (No vertical level.) Displaying the Electronic Level on the LCD Monitor Press the ...
Page 128: Electronic Level
Q Displaying the Electronic Level Displaying the Electronic Level in the Viewfinder The electronic level display in the viewfinder and on the LCD panel uses the exposure level scale. Note that the electronic level is only displayed when shooting in horizontal orientation. It is not displayed in vertical orientation.
Page 129: Flash Photography
Flash Photography With the built-in flash, you can shoot with autoflash, manual flash, and wireless flash. In Creative Zone modes, just press the <D> button to pop-up the built-in flash. To retract the built-in flash, push it back down with your fingers. In Basic Zone modes (except <7>...
Page 130: D Using The Built-In Flash
D Using the Built-in Flash In Basic Zone modes and Creative Zone modes, the shutter speed and aperture for flash photography will be set as shown below. By default, E-TTL II autoflash control (flash autoexposure) will be used in all shooting modes.
Page 131: Using Red-Eye Reduction
D Using the Built-in Flash Effective Range of Built-in Flash [Approx. meters/feet] ISO Speed Aperture 1600 3200 6400 H: 12800 f/3.5 3.5 / 12 5.5 / 17 7.5 / 24 11 / 34 15 / 49 21 / 69 30 / 97 42 / 138 3 / 11 4.5 / 15 6.5 / 21 9 / 30 13 / 43 18 / 60 26 / 85 36 / 121 f/5.6...
Page 132: Compensation
D Using the Built-in Flash y Flash Exposure CompensationN Set flash exposure compensation if the flash exposure of the subject does not come out as desired. You can set flash exposure compensation up to ±3 stops in 1/3-stop increments. Display the Quick Control screen. Press the <Q>...
Page 133 D Using the Built-in Flash If the [2 Auto Lighting Optimizer] (p.101) is not set to [Disable], the image may still look bright even if a darker flash exposure has been set. If you set flash exposure compensation with both the camera and EX- series Speedlite, the Speedlite’s flash exposure compensation setting will override the camera’s.
Page 134 D Using the Built-in Flash A FE LockN FE (flash exposure) lock obtains and locks the standard flash exposure reading for any part of a subject. Press the <D> button to pop-up the built-in flash. Press the shutter button halfway and look in the viewfinder to check that the <D>...
Page 135: Setting The Flash
Setting the FlashN The built-in flash and external Speedlite settings can be set with the camera’s menu. You can use those menu options for the external Speedlite only if the attached EX-series Speedlite are compatible with them. The setting procedure is the same as setting a camera menu function. Select [Flash control].
Page 136 3 Setting the FlashN [Built-in flash func. setting] and [External flash func. setting] Settable Functions [Built-in flash [External flash Function Page func. setting] func. setting] Flash mode Shutter sync. FEB* — — Flash exposure compensation E-TTL II flash metering Zoom* —...
Page 137 3 Setting the FlashN Shutter sync. Normally, set this to [1st curtain] so that the flash fires immediately after the exposure starts. If [2nd curtain] is set, the flash will fire right before the exposure ends. When this is combined with a slow sync speed, you can create a trail of light such as from car headlights at night.
Page 138 3 Setting the FlashN Setting the External Speedlite Custom Functions Display the Custom Function. With the camera ready to shoot with an external Speedlite, select [External flash C.Fn setting], then press <0>. Set the Custom Function. Press the key to select the function number, then set the function.
Page 139: Using Wireless Flash
Using Wireless FlashN The camera’s built-in flash can work as a master unit with Canon Speedlites having a wireless slave feature and wirelessly trigger the Speedlite to fire. Be sure to read about wireless flash photography in the Speedlite’s instruction manual.
Page 140 Using Wireless FlashN Fully Automatic Shooting with One External Speedlite This shows the most basic setup for fully-automatic wireless flash with one Speedlite. Steps 1 to 3 and 6 to 7 apply to all wireless flash shooting. Therefore, these steps are omitted in the other wireless flash setups explained on the pages hereafter.
Page 141 Using Wireless FlashN Select [Wireless func.]. For [Wireless func.], select [0], then press <0>. Under [Wireless func.], [Channel], etc., will be displayed. Set [Channel]. Set the channel (1-4) to the same one as the slave unit. Select [Firing group]. For [Firing group], select [1All], then press <0>.
Page 142 Using Wireless FlashN Fully-automatic Shooting with One External Speedlite and Built-in Flash This shows fully-automatic wireless flash shooting with one external Speedlite and the built-in flash. You can change the flash ratio between the external Speedlite and built-in flash to adjust how the shadows look on the subject.
Page 143: Basic Settings
Using Wireless FlashN Fully-automatic Shooting with Multiple External Speedlites Multiple Speedlite slave units can be treated as one flash unit or separated into slave groups whose flash ratio can be set. The basic settings are shown below. By changing the [Firing group] setting, you can shoot with various wireless flash setups with multiple Speedlites.
Page 144 Using Wireless FlashN [1 (A:B)] Multiple slave units in multiple groups Divide the slave units into groups A and B, and change the flash ratio to obtain the desired lighting effect. Refer to your Speedlite’s instruction manual to set one slave unit’s slave ID to A (Group A) and the other slave unit’s ID to B (Group B) and position them as shown in the illustration.
Page 145 Using Wireless FlashN Fully-automatic Shooting with the Built-in Flash and Multiple External Speedlites The built-in flash can also be added to wireless flash shooting explained on pages 143-144. The basic settings are shown below. By changing the [Firing group] setting, you can shoot with various wireless flash setups of multiple Speedlites complemented with the built-in flash.
Page 146: Flash Exposure Compensation
Using Wireless FlashN Creative Wireless Flash Shooting Flash exposure compensation When [Flash mode] is set to [E-TTL II], flash exposure compensation can be set. The flash exposure compensation settings (see below) which can be set will differ depending on the [Wireless func.] and [Firing group] settings.
Page 147 Using Wireless FlashN Setting the Flash Output Manually for Wireless Flash When [Flash mode] is set to [Manual flash], the flash output can be set manually. The flash output settings ([1 flash output], [Group A output], etc.) that can be set will differ depending on the [Wireless func.] setting (see below).
Page 148: External Speedlites
If the flash metering mode is set to TTL autoflash with the Speedlite’s Custom Function, the flash will fire at full output only. Canon Speedlites other than the EX-series With an EZ/E/EG/ML/TL-series Speedlite set in TTL or A-TTL autoflash mode, the flash can be fired at full output only.
Page 149: Live View Shooting
1/60 sec. to 1/30 sec. Be sure to test the flash synchronization before shooting. Cautions for Live View shooting If you use a non-Canon flash with Live View shooting, set [z Silent shooting] to [Disable] (p.159). The flash will not fire if it is set to [Mode 1] or [Mode 2].
Page 151: Shooting With The Lcd Monitor (Live View Shooting)
Shooting with the LCD Monitor (Live View Shooting) You can shoot while viewing the image on the camera’s LCD monitor. This is called “Live View shooting”. Live View shooting is effective for still subjects which do not move. If you handhold the camera and shoot while viewing the LCD monitor, camera shake can cause blurred images.
Page 152: A Shooting With The Lcd Monitor
A Shooting with the LCD Monitor Display the Live View image. Press the <A> button. The image will appear on the LCD monitor. The image’s field of view is approx. 100%. Focus the subject. When you press the shutter button halfway, the camera will focus with the current AF mode (p.160-167).
Page 153: Enabling Live View Shooting
A Shooting with the LCD Monitor Enabling Live View Shooting Set the [z Live View shoot.] menu to [Enable]. Battery Life with Live View Shooting [Approx. number of shots] Shooting Conditions Temperature No Flash 50% Flash Use At 23°C / 73°F At 0°C / 32°F The figures above are based on a fully-charged Battery Pack LP-E6 and CIPA (Camera &...
Page 154 A Shooting with the LCD Monitor About the Information Display Each time you press the button, the information display will change. AF mode • d : Live mode AF point (Quick mode) • c : Face detection Live mode •...
Page 155 A Shooting with the LCD Monitor Final Image Simulation The final image simulation reflects the effects of the Picture Style, white balance, etc., in the Live View image so you can see what the captured image will look like. During still photo shooting, the Live View image will automatically reflect the settings listed below.
Page 156: Shooting Function Settings
Shooting Function Settings f / R / i Settings During Live View shooting, you can press the <f>, <R>, or button to display the respective setting screen on the LCD monitor, and press the key to set the function. Q Quick Control With the LCD monitor displaying an image, pressing the <Q>...
Page 157: Menu Function Settings
z Menu Function Settings Function settings particular to Live View shooting are explained here. The menu options under the [z] tab are explained below. The functions settable on this menu screen only apply during Live View shooting. These functions do not take effect during viewfinder shooting.
Page 158: Exposure Simulation
Check the captured images on the LCD monitor when shooting. If you print images shot with the EOS 60D with a 1:1 aspect ratio using direct printing on a different camera, the image might not be correctly printed.
Page 159: Silent Shooting
If you use flash, the [Disable] operation will take effect even if you had set it to [Mode 1] or [Mode 2]. When using a non-Canon flash unit, set it to [Disable]. (The flash will not fire if it is set to [Mode 1] or [Mode 2].)
Page 160: Using Af To Focus
Using AF to Focus Selecting the AF Mode The AF modes available are [Live mode], [u Live mode] (face detection, p.161), and [Quick mode] (p.165). If you want to achieve precise focus, set the lens focus mode switch to <MF>, magnify the image, and focus manually (p.167). Select the AF mode.
Page 161 Using AF to Focus Focus the subject. Aim the AF point over the subject and press the shutter button halfway. When focus is achieved, the AF point will turn green and the beeper will sound. If focus is not achieved, the AF point will turn orange.
Page 162: Focusing
Using AF to Focus Focus the subject. Press the shutter button halfway and the camera will focus the face covered by the frame. When focus is achieved, the AF point will turn green and the beeper will sound. If focus is not achieved, the AF point will turn orange.
Page 163 Using AF to Focus Live Mode and u (Face Detection) Live Mode Notes AF operation Focusing will take slightly longer. Even when focus has been achieved, pressing the shutter button halfway will focus again. The image brightness may change during and after the AF operation.
Page 164 Using AF to Focus Shooting conditions which can make focusing difficult: Low-contrast subjects such as the blue sky and solid-color, flat surfaces. Subjects in low light. Stripes and other patterns where there is contrast only in the horizontal direction. Under a light source whose brightness, color, or pattern keeps changing.
Page 165 Using AF to Focus Quick Mode: f The dedicated AF sensor is used to focus in the One-Shot AF mode (p.76), using the same AF method as with viewfinder shooting. Although you can focus the target area quickly, the Live View image will be interrupted momentarily during the AF operation.
Page 166 Using AF to Focus Focus the subject. Aim the AF point over the subject and press the shutter button halfway. The Live View image will turn off, the reflex mirror will go back down, and AF will be executed. When focus is achieved, the beeper will sound and the Live View image will reappear.
Page 167: Focusing Manually
Focusing Manually You can magnify the image and focus precisely manually. Set the lens focus mode switch to <MF>. Turn the lens focusing ring to focus roughly. Move the magnifying frame. Use <9> to move the magnifying frame to the position where you want to focus.
Page 168 Notes About the Live View Image Under low- or bright-light conditions, the Live View image might not reflect the brightness of the captured image. If the light source within the image changes, the screen might flicker. If this happens, stop the Live View shooting and resume shooting under the actual light source to be used.
Page 169 Notes About the Shooting Results When you shoot continuously with the Live View function for a long period, the camera’s internal temperature may increase and it can degrade image quality. Terminate Live View shooting when not shooting images. Before taking a long exposure, stop Live View shooting temporarily and wait several minutes before shooting.
Page 171: Shooting Movies
Shooting Movies Set the Mode Dial to <k> to shoot movies. The movie recording format will be MOV. Cards which can record movies When shooting movies, use a large-capacity SD card with SD Speed Class 6 “ ” or higher rating. If you use a slow-writing card when shooting movies, the movie might not be recorded properly.
Page 172: Shooting Movies
k Shooting Movies Connecting the camera to a TV set is recommended to playback movies (p.209, 212). Autoexposure Shooting Set the Mode Dial to <k>. The reflex mirror will make a sound, then the image will appear on the LCD monitor. Focus the subject.
Page 173 k Shooting Movies During movie shooting, do not point the lens toward the sun. The sun’s heat can damage the camera’s internal components. Cautions for movie shooting are on pages 187 and 188. If necessary, also read the Live View shooting cautions on pages 168 and 169.
Page 174: Manual Exposure
k Shooting Movies Manual Exposure Shooting You can manually set the shutter speed, aperture, and ISO speed for movie shooting. Using manual exposure to shoot movies is for advanced users. Set the Mode Dial to <k>. The reflex mirror will make a sound, then the image will appear on the LCD monitor.
Page 175 k Shooting Movies Set the ISO speed. Press the button. The ISO speed setting screen will appear on the LCD monitor. Press the key to set the ISO speed. • Auto ISO setting : ISO 100 - 6400 •...
Page 176 k Shooting Movies About the Information Display Each time you press the button, the information display will change. Picture Style AF mode • d : Live mode AF point (Quick mode) • c : Face detection Magnifying frame Live mode •...
Page 177 k Shooting Movies One continuous movie will be recorded as one file. Monaural sound is recorded by the camera’s built-in microphone (p.172). Stereo sound recording is possible by connecting an external microphone (commercially available) equipped with a stereo mini plug (3.5mm dia.) to the camera’s external microphone IN terminal (p.16).
Page 178: Shooting Still Photos
k Shooting Movies Shooting Still Photos While shooting a movie, you can also take a still photo by pressing the shutter button completely. Shooting Stills in the <k> Mode When the movie-recording size is [1920x1080] or [1280x720], the aspect ratio will be 16:9. When the movie-recording size is [640x480], the aspect ratio will be 4:3.
Page 179: Shooting Function Settings
Shooting Function Settings f / R / i Settings You can press the <f> or <R> button to display the respective setting screen on the LCD monitor, and press the key to set the function. For manual exposure (p.174), press the button and press the ...
Page 180: Setting The Movie-Recording Size
Setting the Movie-recording Size Under the [o] tab, the [Movie rec. size] menu enables you to select the movie’s image size [****x****] and frame rate [9] (frames recorded per second). The 9 (frame rate) switches automatically depending on the [6 Video system] setting.
Page 181 3 Setting the Movie-recording Size Total Movie Recording Time and File Size Per Minute Due to file system limitations, if the file size of a single movie clip reaches 4 GB, movie shooting will stop automatically. At [1920x1080] and [1280x720], the maximum recording time of a single movie clip will be approx.
Page 182: Menu Function Settings
Menu Function Settings The menu options under the [n], [o], and [Z] tabs are explained below. Note that the settings under the [n], [o], and [Z] menu tabs will take effect only when the Mode Dial is set to <k>. They will not take effect when the Mode Dial is set to any another shooting mode.
Page 183 3 Menu Function Settings AF and metering buttons for k You can change the function assigned to the halfway pressing of the shutter button, the AF start button, and the AE lock button. You can assign the following functions to the buttons in one of ten combinations: Metering &...
Page 184: Sound Recording
3 Menu Function Settings [o] Menu Sound recording Normally, the built-in microphone will record monaural sound. Stereo sound recording is possible by connecting an external microphone equipped with a stereo mini plug (3.5mm dia.) to the camera’s external microphone IN terminal (p.16).
Page 185: Silent Shooting
3 Menu Function Settings [Wind filter] If [Enable] is set, outdoor wind noise entering the microphone will be reduced. Note that, some low-tone noise might also be reduced. When shooting in places where there is no wind, set this to [Disable] for a more natural sound recording. The sound volume balance between L (left) and R (right) cannot be adjusted.
Page 186 3 Menu Function Settings [Z] Menu Exposure compensation Although exposure compensation can be set up to ±5 stops, exposure compensation for movies can be set only up to ±3 stops. For still photos, exposure compensation can be set up to ±5 stops. Auto Lighting Optimizer The Auto Lighting Optimizer can be set as explained on page 101.
Page 187 Notes on Movie Shooting Recording and Image Quality If the attached lens has an Image Stabilizer, the Image Stabilizer will operate at all times even if you do not press the shutter button halfway. The Image Stabilizer will thereby consume battery power and may shorten the total movie shooting time or decrease the number of possible shots.
Page 188 Notes on Movie Shooting Playback and TV connection If the brightness changes during autoexposure movie shooting, that part might look momentarily still when you playback the movie. In such cases, shoot movies with manual exposure. If you connect the camera to a TV set with an HDMI cable (p.209) and shoot a movie in [1920x1080] or [1280x720], the movie being shot will be displayed at a small size on the TV.
Page 189: Image Playback
Image Playback This chapter explains how to playback and erase photos and movies, how to display images on a TV screen, and other playback-related functions. About images taken with another camera: The camera might not be able to properly display images captured with a different camera or edited with a computer or whose file name was changed.
Page 190: Image Playback
x Image Playback Single Image Display Playback the image. Press the <x> button. The last captured image or last image viewed will appear. Select the image. To playback images starting with the last image, turn the <5> dial counterclockwise. To playback images starting with the first captured image, turn the dial clockwise.
Page 191: B Shooting Information Display
B Shooting Information Display Sample of Image Taken in a Creative Zone Mode Exposure compensation amount Protect Flash exposure Rating compensation amount Folder number - File number Aperture Histogram Shutter speed (Brightness/RGB) Picture Style/Settings Metering mode Shooting mode ISO speed Highlight tone priority White balance Color space...
Page 192 B Shooting Information Display Sample of Image Taken in a Basic Zone Mode Shooting mode Ambience and ambience effects Lighting or scene * For images taken in Basic Zone modes, the information displayed may differ depending on the shooting mode. Sample of Movie Taken in Movie Mode Shooting time Playback...
Page 193: About The Histogram
B Shooting Information Display About the AF Point Display When the [4 AF point disp.] menu option is set to [Enable], the AF point which achieved focus will be displayed in red. If automatic AF point selection was used, multiple AF points may be displayed in red. About the Histogram The brightness histogram shows the exposure level distribution and overall brightness.
Page 194: H I Searching For Images Quickly
x Searching for Images Quickly H Display Multiple Images on One Screen (Index display) Search for images quickly with the index display showing four or nine images on one screen. Switch to the index display. During image playback, press the ...
Page 195 x Searching for Images Quickly I Jump through Images (Jump display) With the single image display, you can turn the <6> dial to jump through the images. Select the jump method. In the [4 Image jump w/6] menu, select the jump method, then press <0>.
Page 196: U/Y Magnified View
u/y Magnified View You can magnify a shot image by 1.5x to 10x on the LCD monitor. Magnify the image. During image playback, press the button. The image will be magnified. If you hold down the button, the image will be magnified until it reaches the maximum magnification.
Page 197: Rotating The Image
b Rotating the Image You can rotate the displayed image to the desired orientation. Select [Rotate]. Under the [3] tab, select [Rotate], then press <0>. Select the image. Turn the <5> dial to select the image to be rotated. You can also select an image on the index display.
Page 198: Setting Ratings
Setting Ratings With the [4 Rating] menu, you can give one of five ratings (l, m, n, o, p) to images and movies. Select [Rating]. Select the [4 Rating] menu, then press <0>. Select an image or movie. Turn the <5> dial to select the image or movie to be rated.
Page 199 3 Setting Ratings The number of images and movies for each rating will be counted up to 3 digits (999). If rated images reaches 1000 or higher, [###] will be displayed. Taking advantage of ratings With the [4 Image jump w/6] menu, you can display only the rated images and movies.
Page 200: Q Quick Control During Playback
Q Quick Control During Playback When you press the <Q> button during playback, you can set the following: [3 Protect Images, 3 Rotate, 4 Rating, 3 Creative filters, 3 Resize (JPEG images only), 4 Highlight alert, 4 AF point display, and 4 Image jump w/6]. For movies, only the functions in bold above can be set.
Page 201 Pressing the <Q> button during the index display will switch to the single-image display and the Quick Control screen will appear. Pressing the <Q> button again will return to the index display. Regarding images not taken with the EOS 60D, selectable functions may be limited.
Page 202: Enjoying Movies
k Enjoying Movies Basically, you can playback movies in the following three ways: Playback on a TV set (p.209, 212) Use the provided AV cable or an HDMI Cable HTC-100 (sold separately) to connect the camera to a TV set. Then you can playback the captured movies and photos on the TV.
Page 203 k Enjoying Movies Playback on the Camera’s LCD Monitor (p.204-208) You can playback movies on the camera’s LCD monitor and even edit out the first and last scenes. You can also playback the photos and movies recorded in the card as an automatic slide show.
Page 204: Playing Movies
k Playing Movies Playback the image. Press the <x> button to display the images. Select a movie. Turn the <5> dial to select the movie to be played. With the single-image display, the <1s> icon displayed on the upper left indicates that it is a movie. On the index display, the perforation on the left edge of the image indicates that it is a movie.
Page 205 k Playing Movies Function Playback Description 2 Exit Returns to the single-image display. Play Pressing <0> toggles between play and stop. Adjust the slow motion speed by pressing the key. Slow motion The slow-motion speed is indicated on the upper right. First frame Displays the movie’s first frame.
Page 206: Editing The Movie's First And Last Scenes
X Editing the Movie’s First and Last Scenes You can edit out the first and last scenes of a movie in 1-sec. increments. On the movie playback screen, select [X]. The editing screen will be displayed. Specify the part to be edited out. Select either [U] (Cut beginning) or [V] (Cut end), then press <0>.
Page 207: Slide Show (Auto Playback)
Slide Show (Auto Playback) You can playback the images in the card as an automatic slide show. Select [Slide show]. Under the [4] tab, select [Slide show], then press <0>. Select the images to be played. Number of images to be played Press the <V>...
Page 208: Start The Slide Show
3 Slide Show (Auto Playback) Set [Set up] as desired. Press the <V> key to select [Set up], then press <0>. Set the [Display time] (still photos), [Repeat], and [Transition effect] options, then press the <M> button. Display time Repeat Transition effect Start the slide show.
Page 209: Viewing The Images On Tv
Viewing the Images on TV You can also view the still photos and movies on a TV set. Before connecting or disconnecting the cable between the camera and television, turn off the camera and television. * Adjust the movie’s sound volume with the TV set. * Depending on the TV set, part of the image displayed might be cut off.
Page 210 Viewing the Images on TV Press the <x> button. The image will appear on the TV screen. (Nothing will be displayed on the camera’s LCD monitor.) The images will be displayed at the TV’s optimum resolution automatically. By pressing the button, you can change the display format.
Page 211 Viewing the Images on TV For HDMI CEC TV sets When a TV set compatible with HDMI CEC* is connected to the camera with the HDMI cable, you can use the TV set’s remote control for playback operations. * An HDMI-standard function enabling you to control multiple HDMI devices with one remote control unit. Select [Ctrl over HDMI].
Page 212 Viewing the Images on TV Viewing on Non-HD (High-Definition) TV Sets Connect the provided AV cable to the camera. With the plug’s <Canon> logo facing the front of the camera, insert it into the <q> terminal. Connect the AV cable to the TV (Red) set.
Page 213: K Protecting Images
K Protecting Images Protecting an image prevents it from being erased accidentally. Select [Protect images]. Under the [3] tab, select [Protect images], then press <0>. The protect setting screen will appear. Select the image and protect it. Select [Select images], then press <0>.
Page 214: Protecting All Images In A Folder Or Card
K Protecting Images 3 Protecting All Images in a Folder or Card You can protect all the images in a folder or card at one time. When the [3 Protect images] menu option is set to [All images in folder] or [All images on card], all the images in the folder or card will be protected.
Page 215: L Erasing Images
L Erasing Images You can either select and erase images one by one or erase them in one batch. Protected images (p.213) will not be erased. Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it. To prevent important images from being erased accidentally, protect them.
Page 216 L Erasing Images Select [Select and erase images]. Select [Select and erase images], then press <0>. The images will be displayed. To display the three-image display, press the button. To return to the single-image display, press the button. Select the images to be erased.
Page 217: Changing Image Playback Settings
Changing Image Playback Settings 3 Adjusting the LCD Monitor Brightness You can adjust the brightness of the LCD monitor to make it easier to read. Select [LCD brightness]. Under the [6] tab, select [LCD brightness], then press <0>. Adjust the brightness. While referring to the gray chart, press the ...
Page 218: Auto Rotation Of Vertical Images
Changing Image Playback Settings 3 Auto Rotation of Vertical Images Vertical images are rotated automatically so they are displayed vertically on the camera’s LCD monitor and computer instead of horizontally. The setting of this feature can be changed. Select [Auto rotate]. Under the [5] tab, select [Auto rotate], then press <0>.
Page 219: Post-Processing Images
RAW images with the camera. It may not be possible to process images shot with a camera other than the EOS 60D. Post-processing images as described in this chapter cannot be done while the camera is connected to a personal computer...
Page 220: Creative Filters
Creative Filters You can apply the following Creative filters to an image and save it as a new image: Grainy B/W, Soft focus, Toy camera effect, and Miniature effect. Creative filters cannot be applied to 41 and 61 images. Select [Creative filters]. Select the [3 Creative filters] menu option, then press <0>.
Page 221 Creative Filters Save the image. Select [OK] to save the image. Note the destination folder and image file number, then select [OK]. To apply a filter to another image, repeat steps 2 to 5. To exit and return to the menu, press the <M>...
Page 222: S Resize
S Resize You can resize an image to make the pixel count lower and save it as a new image. Resizing an image is possible only with JPEG 3/4/a/b images. JPEG c and RAW images cannot be resized. Select [Resize]. Select the [3 Resize] menu option, then press <0>.
Page 223 S Resize Resize Options According to Original Image Size Available Resize Settings Original Image Size About Image Sizes The [8.0M 3456x2304] image size displayed in step 3 has a 3:2 aspect ratio. The image size according to aspect ratios is shown in the table below.
Page 224: R Processing Raw Images With The Camera
R Processing RAW Images with the CameraN You can process 1 images with the camera and save them as JPEG images. While the RAW image itself does not change, you can process the RAW image according to different conditions to create any number of JPEG images from it.
Page 225 R Processing RAW Images with the CameraN Displaying the setting screen Press <0> to display the setting screen. Turn the <6> or <5> dial to change the setting. To return to the screen in step 3, press <0>. Save the image. Select [W] (Save), then press <0>.
Page 226: Noise Reduction For High Iso Speeds
R Processing RAW Images with the CameraN RAW Image-processing Options Brightness You can adjust the image brightness up to ±1 stop in 1/3-stop increments. The displayed image will reflect the setting’s effect. White balance (p.96) You can select the white balance. If you select [P], use the <6> dial to set the color temperature.
Page 227: Distortion Correction
R Processing RAW Images with the CameraN Color space (p.110) You can select either sRGB or Adobe RGB. Since the camera’s LCD monitor is not compatible with Adobe RGB, the image will not look very different when either color space is set. Peripheral illumination correction (p.102) You can set [Enable] or [Disable].
Page 228: Chromatic Aberration Correction
R Processing RAW Images with the CameraN Chromatic aberration correction When [Enable] is set, lateral chromatic aberration caused by the lens is corrected. If [Enable] is set, the corrected image will be displayed. (The image periphery will also be slightly cropped.) If the effect is difficult to discern, press the ...
Page 229: Sensor Cleaning
In case visible spots still remain after the automatic sensor cleaning, having the sensor cleaned by a Canon Service Center is recommended. Even while the Self Cleaning Sensor Unit is operating, you can press the shutter button halfway to interrupt the cleaning and start shooting immediately.
Page 230: Automatic Sensor Cleaning
f Automatic Sensor Cleaning Whenever you set the power switch to <1> or <2>, the Self Cleaning Sensor Unit operates to automatically shake off the dust on the front of the sensor. Normally, you need not pay attention to this operation.
Page 231: Appending Dust Delete Data
Appending Dust Delete DataN Normally, the Self Cleaning Sensor Unit will eliminate most of the dust that might be visible on captured images. However, in case visible dust still remains, you can append the Dust Delete Data to the image for erasing the dust spots later.
Page 232: Photograph A Solid-White Object
3 Appending Dust Delete DataN Photograph a solid-white object. At a distance of 20 cm - 30 cm (0.7 ft. - 1.0 ft.), fill the viewfinder with a patternless, solid-white object and take a picture. The picture will be taken in the aperture-priority AE mode with an aperture of f/22.
Page 233: Manual Sensor Cleaning
The surface of the image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended. Before cleaning the sensor, detach the lens from the camera.
Page 234 Never use canned air or gas to clean the sensor. The blowing force can damage the sensor or the spray gas can freeze on the sensor. If a smudge that cannot be removed with a blower remains, having the sensor cleaned by a Canon Service Center is recommended.
Page 235: Printing Images
Printing Images Printing (p.236) You can connect the camera directly to a printer and print out the images in the card. The camera is compatible with “wPictBridge” which is the standard for direct printing. Digital Print Order Format (DPOF) (p.245) DPOF (Digital Print Order Format) enables you to print images recorded in the card according to your printing instructions such as the image selection, quantity to print,...
Page 236: Preparing To Print
Preparing to Print The direct printing procedure is done entirely with the camera while you look at the LCD monitor. Connecting the Camera to a Printer Set the camera’s power switch to <2>. Set up the printer. For details, see the printer’s instruction manual.
Page 237 Preparing to Print Playback the image. PictBridge Press the < > button. The image will appear, and the <w> icon will appear on the upper left to indicate that the camera is connected to a printer. Movies cannot be printed. The camera cannot be used with printers compatible only with CP Direct or Bubble Jet Direct.
Page 238: Wprinting
wPrinting The screen display and setting options will differ depending on the printer. Some settings might not be available. For details, see the printer’s instruction manual. Printer-connected icon Select the image to be printed. Check that the <w> icon is displayed on the upper left of the LCD monitor.
Page 239 wPrinting QSetting the Paper Size Select the size of the paper loaded in the printer, then press <0>. The paper type screen will appear. YSetting the Paper Type Select the type of the paper loaded in the printer, then press <0>. The page layout screen will appear.
Page 240: Set The Printing Effects
wPrinting Set the printing effects. Set as necessary. If you need not set any printing effects, go to step 5. What is displayed on the screen differs depending on the printer. Select the option on the upper right (circled in the screenshot), then press <0>.
Page 241: Start Printing
wPrinting Set the date and file number imprinting. Set as necessary. Select < >, then press <0>. Set as desired, then press <0>. Set the number of copies. Set as necessary. Select < >, then press <0>. Set the number of copies, then press <0>.
Page 242 wPrinting e Adjustment of Printing Effects In step 4 on page 240, select the printing effect. When the <e> icon is displayed brightly next to <z>, press the button. You can then adjust the printing effect. What can be adjusted or what is displayed will depend on the selection made in step 4.
Page 243: Trimming The Image
wPrinting Trimming the Image You can crop the image and print only Tilt correction the trimmed portion as if the image was recomposed. Do the trimming right before printing. If you set the trimming and then set the print settings, you may have to set the trimming again.
Page 244: Error Messages
wPrinting Depending on the printer, the trimmed image area might not be printed as you specified. The smaller you make the trimming frame, the grainier the picture will look in the print. While trimming the image, look at the camera’s LCD monitor. If you look at the image on a TV screen, the trimming frame might not be displayed accurately.
Page 245: W Digital Print Order Format (Dpof)
W Digital Print Order Format (DPOF) You can set the print type, date imprinting, and file No. imprinting. The print settings will be applied to all print-ordered images. (They cannot be set individually for each image.) Setting the Printing Options Select [Print order].
Page 246 W Digital Print Order Format (DPOF) Standard Prints one image on one sheet. Index Multiple thumbnail images are printed on one sheet. Print type Both Prints both the standard and index prints. Date [On] imprints the recorded date on the print. File number [On] imprints the file No.
Page 247: Print Ordering
W Digital Print Order Format (DPOF) Print Ordering Sel.Image Select and order images one by one. To display the three-image display, press the button. To return to the single-image display, press the button. After completing the print order, press the <M>...
Page 248: W Direct Printing With Dpof
W Direct Printing with DPOF With a PictBridge printer, you can easily print images with DPOF. Prepare to print. See page 236. Follow the “Connecting the Camera to a Printer” procedure up to step 5. Under the [3] tab, select [Print order]. Select [Print].
Page 249: Customizing The Camera
Customizing the Camera With Custom Functions, you can change the camera functions to suit your preferences. Also, the current camera settings can be saved under the Mode Dial’s <w> position. The functions explained in this chapter will take effect only in the Creative Zone modes.
Page 250: Setting Custom Functions
Setting Custom FunctionsN Select [8]. Select the group. Select a Custom Function group (I to IV), then press <0>. Select the Custom Function No. Custom Function No. Press the key to select the number of the Custom Function to be set, then press <0>.
Page 251: Custom Functions
Custom FunctionsN A LV C.Fn I: Exposure shooting Exposure level increments ISO speed setting increments p.252 ISO expansion Bracketing auto cancel Bracketing sequence Safety shift p.253 Flash sync. speed in Av mode C.Fn II: Image Long exposure noise reduction p.254 High ISO speed noise reduction Highlight tone priority p.255...
Page 252: Custom Function Settings
Custom Function SettingsN C.Fn I: Exposure C.Fn I -1 Exposure level increments 0: 1/3-stop 1: 1/2-stop Sets 1/2-stop increments for the shutter speed, aperture, exposure compensation, AEB, flash exposure compensation, etc. Effective when you prefer to control the exposure in less fine increments than 1/3-stop increments.
Page 253 3 Custom Function SettingsN C.Fn I -5 Bracketing sequence The AEB shooting sequence and white balance bracketing sequence can be changed. 0: 0, -, + 1: -, 0, + WB Bracketing B/A Direction M/G Direction 0 : Standard exposure 0 : Standard white balance 0 : Standard white balance - : Decreased exposure - : Blue bias - : Magenta bias + : Increased exposure...
Page 254: C.fn Ii: Image
3 Custom Function SettingsN C.Fn II: Image C.Fn II -1 Long exposure noise reduction 0: Off 1: Auto For 1 sec. or longer exposures, noise reduction is performed automatically if noise typical of long exposures is detected. This [Auto] setting is effective in most cases. 2: On Noise reduction is performed for all exposures of 1 sec.
Page 255: C.fn Iii: Autofocus/Drive
3 Custom Function SettingsN C.Fn II -3 Highlight tone priority 0: Disable 1: Enable Improves the highlight detail. The dynamic range is expanded from the standard 18% gray to bright highlights. The gradation between the grays and highlights becomes smoother. With setting 1, the Auto Lighting Optimizer (p.101) is automatically set to [Disable] and the setting cannot be changed.
Page 256 3 Custom Function SettingsN C.Fn III -3 Superimposed display 0: On 1: Off When focus is achieved, the AF point will not light up in red in the viewfinder. Set this if the AF points lighting up is too distracting. The AF point will still light up when you select it.
Page 257: C.fn Iv: Operation/Others
3 Custom Function SettingsN C.Fn III -5 Mirror lockup 0: Disable 1: Enable Prevents camera vibrations caused by the reflex mirror action that can disturb shooting with super telephoto lenses or close-up (macro) shooting. See page 125 for the mirror lockup procedure. C.Fn IV: Operation/Others (p.45) Customizing camera controls with the Quick Control screen...
Page 258 3 Custom Function SettingsN C.Fn IV -2 Assign SET button You can assign a frequently-used function to <0>. Press <0> when the camera is shooting-ready. 0: Default (no func) 1: Image quality Pressing <0> will display the image-recording quality setting screen on the LCD monitor.
Page 259 Even if you clear all the Custom Function settings to the default settings, the C.Fn IV -4 setting will be retained. Since the EOS 60D’s standard focusing screen is the Ef-A, C.Fn IV -4-0 is set upon factory shipment. To change the focusing screen, refer to the instructions that come with the focusing screen.
Page 260 3 Custom Function SettingsN C.Fn IV -5 Add image verification data 0: Disable 1: Enable Data for verifying whether the image is original or not is appended to the image automatically. When the shooting information of an image appended with the verification data is displayed (p.191), the <L> icon will appear.
Page 261: Registering My Menu
Registering My MenuN Under the My Menu tab, you can register up to six menu options and Custom Functions whose settings you change frequently. Select [My Menu settings]. Under the [9] tab, select [My Menu settings], then press <0>. Select [Register to My Menu]. Select [Register to My Menu], then press <0>.
Page 262: W: Register Camera User Settings
w: Register Camera User SettingsN Under the Mode Dial’s <w> position, you can register most of the current camera settings including your preferred shooting mode, menus, Custom Function settings, etc. Set the camera. First set the functions you want to register: Shooting mode, shutter speed, aperture, ISO speed, AF mode, AF point, metering mode, drive...
Page 263: Registration
w: Register Camera User SettingsN Menu Options which can be Registered Quality, Beep, Release shutter without card, Image review, Peripheral illumination correction, Red-eye reduction, Flash control (Flash firing, Shutter sync., Flash exposure compensation, E-TTL II metering, Wireless function) Exposure compensation/AEB, Auto Lighting Optimizer, Picture Style, White balance, Custom White Balance, WB Shift/BKT, Color space ISO Auto...
Page 265: Reference
Reference This chapter provides reference information for camera features, system accessories, etc.
Page 266: B Button Functions
B Button Functions When you press the button while the camera is ready to shoot, you can display [Displays camera settings], [Displays shooting functions] (p.267), and [Electronic level] (p.127). Under the [7] tab, the [INFO. button display options] option enables you to select what the ...
Page 267: Shooting Settings
B Button Functions Shooting Settings Picture Style Aperture Shutter speed AE lock Shooting mode ISO speed Exposure level/ AEB range Highlight tone priority Electronic level Flash exposure Custom controls compensation* AF mode Possible shots Quick Control icon Battery check Image-recording quality AF point Maximum burst White balance correction...
Page 268: Checking The Battery Information
Checking the Battery Information You can check the battery’s condition on the LCD monitor. Each Battery Pack LP-E6 has a unique serial No., and you can register multiple battery packs to the camera. When you use this feature, you can check the registered battery pack’s remaining capacity and operation history.
Page 269 3 Checking the Battery Information Registering the Battery to the Camera You can register up to six Battery Packs LP-E6 to the camera. To register multiple battery packs to the camera, do the procedure below for each battery pack. Press the button. With the battery info.
Page 270 3 Checking the Battery Information Labeling the Serial No. on the Battery Affixing a serial No. label onto all the registered Battery Pack LP-E6’s makes it convenient. Write the serial No. on a label. Serial No. Write the serial No. displayed on the battery history screen on a label approx.
Page 271 3 Checking the Battery Information Checking the Remaining Capacity of a Registered Battery Pack You can check the remaining capacity of any battery pack (even while not installed) and also when it was last used. Look for the serial No. Serial No.
Page 272: Using A Household Power Outlet
Using a Household Power Outlet With the AC Adapter Kit ACK-E6 (sold separately), you can connect the camera to a household power outlet and not worry about the remaining battery level. Connect the DC Coupler’s plug. Connect the DC Coupler’s plug to the AC Adapter’s socket.
Page 273: Using Eye-Fi Cards
Using Eye-Fi Cards With a commercially-available Eye-Fi card already set up, you can automatically transfer captured images to a personal computer or upload them to an online service via a wireless LAN. The image transfer is a function of the Eye-Fi card. For instructions on how to set up and use the Eye-Fi card or to troubleshoot any image transfer problems, refer to the Eye-Fi card’s instruction manual or inquire the card’s manufacturer.
Page 274 Using Eye-Fi Cards Display the connection information. Select [Connection info.], then press <0>. Check the [Access point SSID:]. Check that an access point is displayed for [Access point SSID:]. You can also check the Eye-Fi card’s MAC address and firmware version. Press the <M>...
Page 275 Using Eye-Fi Cards Cautions for Using Eye-Fi Cards If “ ” is displayed, an error occurred while retrieving the card information. Turn the camera off and on again. Even if [Eye-Fi trans.] is set to [Disable], it may still transmit a signal. In hospitals, airports, and other places where wireless transmissions are prohibited, remove the Eye-Fi card from the camera.
Page 276: Function Availability Table According To Shooting Modes
Function Availability Table According to Shooting Modes o: Set automatically k: User selectable : Not selectable Basic Zone Creative Zone Mode Dial d s f a F k z 2 3 4 5 6 All recording quality settings selectable Auto Manual speed Settable maximum...
Page 277: Multiple Aspect Ratios
Function Availability Table According to Shooting Modes Basic Zone Creative Zone Mode Dial d s f a F k z 2 3 4 5 6 One-Shot AI Servo AI Focus AF point selection AF-assist beam Metering Evaluative Metering mode mode selection Program shift Exposure...
Page 278: Menu Settings
Menu Settings 1 Shooting 1 (Red) Page 73 / 83 / 74 / 84 / 7a / 8a / b / c Quality 1 / 41 / 61 Beep Enable / Disable – Release shutter Enable / Disable without card Image review Off / 2 sec.
Page 279 Menu Settings z Shooting 4 (Red) Page Live View shooting Enable / Disable Live mode / u Live mode / Quick mode AF mode Grid display Off / Grid 1l / Grid 2m Aspect ratio 3:2 / 4:3 / 16:9 / 1:1 Exposure simulation Enable / Disable Silent shooting...
Page 280 Menu Settings 5 Set-up 1 (Yellow) Page 1min. / 2 min. / 4 min. / 8 min. / 15 min. / Auto power off 30 min. / Off Auto rotate OnzD / OnD / Off Format Initialize and erase data on the card File numbering Continuous / Auto reset / Manual reset Select folder...
Page 281 Menu Settings 8 Custom Functions (Orange) Page C.Fn I : Exposure C.Fn II : Image C.Fn III : Autofocus/ Customize camera functions as desired Drive C.Fn IV : Operation/ Others Clear all Custom Clears all Custom Function settings Functions (C.Fn) 9 My Menu (Green) Register frequently-used menu items and My Menu settings...
Page 282 Menu Settings o Movie 2 (Red) Page 1920x1080 (6 / 5 / 4) / 1280x720 (8 / 7) / Movie recording size 640x480 (8 / 7) / Crop 640x480 (8 / 7) Sound recording: Auto / Manual / Disable Recording level Sound recording Wind filter: Disable / Enable Silent shooting...
Page 283: Troubleshooting Guide
If the battery’s remaining capacity (p.268) is 94% or higher, the battery will not be recharged. Do not recharge any battery pack other than genuine Canon Battery Pack LP-E6. The charger’s lamp blinks at high speed. If there is a problem with the battery charger or battery pack or if...
Page 284 Troubleshooting Guide The access lamp still blinks even when the power switch is set to <2>. If the power is turned off while an image is being recorded to the card, the access lamp will still continue to light/blink for a few seconds. When the image recording is completed, the power will turn off automatically.
Page 285 Troubleshooting Guide The card cannot be used. If a card error message is displayed, see page 33 or 291. The image is out of focus. Set the lens focus mode switch to <AF> (p.34). To prevent camera shake, press the shutter button gently (p.39, 40). If the lens has an Image Stabilizer, set the IS switch to <1>.
Page 286 Set [8C.Fn I -7: Flash sync. speed in Av mode] to [0: Auto] (p.253). The external flash does not fire. If you use a non-Canon flash with Live View shooting, set the [z Silent shoot.] menu option to [Disable] (p.159). The camera makes a noise when it is shaken.
Page 287 Troubleshooting Guide The shutter makes two shooting sounds during Live View shooting. If you use flash, the shutter will make two sounds each time you shoot (p.153). The camera button/dial’s function has changed. On the Quick Control screen, check the [Custom Controls] setting (p.257).
Page 288 Troubleshooting Guide When the movie is played, camera operation noise can be heard. If you operate the camera’s dials or lens during movie shooting, the operation noise will also be recorded. Use an external microphone (commercially available) (p.187). Display & Operation Problems The LCD monitor does not display a clear image.
Page 289 Troubleshooting Guide The file name’s first character is an underscore (“_MG_”). Set the color space to sRGB. If Adobe RGB is set, the first character will be an underscore (p.110). The file numbering does not start from 0001. If you use a card which already has images recorded, the file numbering might start from the last image in the card (p.106).
Page 290: Instruction Manual
Troubleshooting Guide [###] is displayed. [###] will be displayed when the number of images/movies exceeds the number of digits that can be displayed. The [Eye-Fi settings] menu item does not appear. [Eye-Fi settings] will appear only when an Eye-Fi card is inserted into the camera.
Page 291: Error Codes
50, 60, Operate the power switch, remove and install the battery pack 70, 80 again, or use a Canon lens (p.26, 28). * If the error still persists, write down the error No. and contact your nearest Canon Service Center.
Page 292: System Map
System Map Eyepiece Extender EP-EX15 ST-E2 270EX 430EX II 580EX II Macro Ring Lite Macro Twin Lite MR-14EX MT-24EX Rubber Frame Eb E-series Dioptric Adjustment Lenses Bundled Accessories Focusing Eyecup Eb Screen Ef-A Angle Finder C Wide Strap EW-EOS60D Focusing Screen Battery Pack Battery Charger Ef-D...
Page 293 System Map Remote Leather Case Controller Remote Switch EH21-L RC-6 RS-60E3 EF lenses EF-S lenses External microphone HDMI Cable HTC-100 (2.9 m/9.5 ft.) TV/Video Stereo AV Cable AVC-DC400ST (1.3 m/4.3 ft.) PictBridge-compatible printer EOS DIGITAL Software Instruction Solution Disk Manual Interface Cable (1.3 m/4.3 ft.) Interface Cable IFC-200U/500U...
Page 294: Specifications
SD memory card, SDHC memory card, SDXC memory card Image sensor size: 22.3 x 14.9 mm Compatible lenses: Canon EF lenses (including EF-S lenses) (35mm-equivalent focal length is approx. 1.6 times the lens focal length) Lens mount: Canon EF mount •...
Page 295 Specifications Automatic image brightness correction: Auto Lighting Optimizer Highlight tone priority: Provided Lens peripheral illumination correction: Provided • Viewfinder Type: Eye-level pentaprism Coverage: Vertical/Horizontal approx. 96% (with Eye point approx. 22 mm) Magnification: Approx. 0.95x (-1 m with 50mm lens at infinity) Eye point: Approx.
Page 296 Continuous shooting speed: Max. approx. 5.3 shots/sec. Max. burst: JPEG Large/Fine: Approx. 58 shots RAW: Approx. 16 shots RAW+JPEG Large/Fine: Approx. 7 shots * Figures are based on Canon’s testing standards (ISO 100 and Standard Picture Style) and a 4GB card.
Page 297 Specifications • Live View Shooting Aspect ratio settings: 3:2, 4:3, 16:9, 1:1 Focusing: Live mode, Face detection Live mode (Contrast detection) Quick mode (Phase-difference detection) Manual focusing (Approx. 5x / 10x magnification possible) Metering modes: Evaluative metering with the image sensor Metering range: EV 0 - 20 (at 23°C/73°F with EF50mm f/1.4 USM lens, ISO 100)
Page 298 Specifications Sound recording: Built-in monaural microphone External stereo microphone terminal provided Sound recording level adjustable, wind filter provided Grid display: Two types • LCD Monitor Type: TFT color, liquid-crystal monitor Monitor size and dots: Wide, 3.0-in. (3:2) with approx. 1.04 million dots Coverage: Approx.
Page 299 Specifications • Custom Functions Custom Functions: Camera user settings: Register under Mode Dial’s C My Menu registration: Possible Copyright information: Entry and inclusion enabled • Interface Audio/video OUT/ Digital terminal: Analog video (Compatible with NTSC/PAL)/stereo audio output For personal computer communication and direct printing (Hi-Speed USB equivalent) HDMI mini OUT terminal: Type C (Auto switching of resolution), CEC-compatible External microphone...
Page 300 Specifications • Battery Pack LP-E6 Type: Rechargeable lithium-ion battery Rated voltage: 7.2 V DC Battery capacity: 1800 mAh Dimensions (W x H x D): Approx. 38.4 x 21.0 x 56.8 mm / 1.5 x 0.8 x 2.2 in. Weight: Approx. 80 g / 2.8 oz. •...
Page 301 Specifications • EF-S18-55mm f/3.5-5.6 IS II Angle of view: Diagonal extent: 74°20’ - 27°50’ Horizontal extent: 64°30’ - 23°20’ Vertical extent: 45°30’ - 15°40’ Lens construction: 11 elements in 9 groups Minimum aperture: f/22 - 36 Closest focusing distance: 0.25 m / 0.82 ft. (From image sensor plane) Max.
Page 302 Specifications • EF-S18-135mm f/3.5-5.6 IS Angle of view: Diagonal extent: 74°20’ - 11°30’ Horizontal extent: 64°30’ - 9°30’ Vertical extent: 45°30’ - 6°20’ Lens construction: 16 elements in 12 groups Minimum aperture: f/22 - 36 Closest focusing distance*: At 18mm focal length: 0.49 m / 1.61 ft. (327 x 503 mm / 12.9 x 19.8 in.
Page 303 Dimensions, maximum diameter, length and weight listed above are based on CIPA Guidelines (except weight for camera body only). Product specifications and the exterior are subject to change without notice. If a problem occurs with a non-Canon lens attached to the camera, consult the respective lens maker. Trademarks Adobe is a trademark of Adobe Systems Incorporated.
Page 304 Use of genuine Canon accessories is recommended This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non- genuine Canon accessories (e.g., a leakage and/or explosion of a battery...
Page 305: Safety Warnings
Safety Warnings Follow these safeguards and use the equipment properly to prevent injury, death, and material damage. Preventing Serious Injury or Death • To prevent fire, excessive heat, chemical leakage, and explosions, follow the safeguards below: - Do not use any batteries, power sources, and accessories not specified in this booklet.
Page 306 • Do not use paint thinner, benzene, or other organic solvents to clean the equipment. Doing so may cause fire or a health hazard. If the product does not work properly or requires repair, contact your dealer or your nearest Canon Service Center.
Page 307 If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A. Inc. One Canon Plaza, Lake Success, NY 11042, U.S.A. Tel No. (516)328-5600 This Class B digital apparatus complies with Canadian ICES-003.
Page 308 4. Do not expose the charger to rain or snow. 5. Use of an attachment not recommended or sold by Canon may result in fire, electric shock, or personal injury. 6. To reduce risk of damage to electric plug and cord, pull by plug rather than by cord when disconnecting charger.
Page 309 List of the lenses with which peripheral AF points will become vertical-line or horizontal-line sensitive AF points With the lenses listed below, the six AF points on the right and left will be horizontal-line sensitive and the upper and lower two AF points will be vertical-line sensitive.
Page 310 MEMO...
Page 311 MEMO...
Page 312 MEMO...
Page 313 Software Start Guide and Instruction Manual Index EOS DIGITAL Solution Disk ........314 Installing the Software ..........315 Software Instruction Manual ........316 Index................317 EOS DIGITAL Software Solution Disk Instruction Manual (Software)
Page 314: Software Start Guide
Software Start Guide EOS DIGITAL Solution Disk This disk contains various software for EOS DIGITAL cameras. EOS Utility With the camera connected to a personal computer, EOS Utility enables you to transfer still images and movies shot with the camera to the computer.
Page 315: Installing The Software
(the newer version will overwrite the previous version). Insert EOS DIGITAL Solution Disk (CD). For Macintosh, double-click to open the CD-ROM icon displayed on the desktop, and double-click on [Canon EOS Digital Installer]. Click [Easy Installation] and follow the on-screen instructions to install.
Page 316: Software Instruction Manual
Software Start Guide Software Instruction Manual Contains the Instruction Manual files for the software programs provided. Copying and Viewing the Instruction Manual PDFs Insert the [Software INSTRUCTION MANUAL] CD into your computer. Double-click the CD-ROM icon. For Windows, the icon displayed in [My Computer]. For Macintosh, the icon is displayed on the desktop.
Page 317: Index
Index 10-sec. or 2-sec. delay....82 Battery ........ 24, 26, 29 1280x720 ........180 Battery check........29 1920x1080 ........180 Battery Grip ......29, 292 1st-curtain sync......137 Beeper.......... 278 2nd-curtain sync......137 Black-and-white image ..68, 91, 93 4- or 9-image index display...194 Bracketing ......100, 121 640x480 ........180 Bulb ..........
Page 318 Index Creative filters.......220 File name ........106 M icon..........4 File numbering ......106 Crop 640x480 .......180 File size ......85, 181, 191 Cross-type focusing ......79 Filter effect ......93, 220 Custom Controls .....45, 257 Final image simulation ..155, 177 Custom Functions......250 Fine (Image-recording quality) ..
Page 319 Index Full Auto..........54 Image area ........36 Full HD ..........171 Image dust prevention....229 Full High-Definition..180, 202, 209 Image review time ......50 Function availability table....276 Image Stabilizer (lens)....38 Image transfer ......273 Image verification data ....260 Grainy B/W........221 Image-recording quality....
Page 320 High ISO speed ....... 254 Maximum burst ......85, 87 Long exposures ....... 254 Medium Nomenclature......... 16 (Image-recording quality)..85, 222 Non-Canon flash units....149 Memory card......32, 48 Normal (Image-recording quality)... 84 Menu..........46 NTSC ......180, 212, 280 Menu settings ......278 My Menu........261 No..........
Page 321 Index Peripheral illumination correction..102 RAW image processing with the camera ......224 Personal white balance....98 RAW+JPEG........84 PictBridge........235 Recharge........24 Picture Style ......90 - 95 Recharge performance (Battery).. 268 Pixels ..........84 Red-eye reduction ......131 Playback ........189 Release shutter without card..32 Portrait ........62, 90 Remote control shooting ..
Page 322 Index Shooting settings display ..43, 267 Volume (Movie playback) ..... 205 Shutter button .........40 Shutter sync........137 WB ..........96 Shutter-priority AE ......114 White balance ........ 96 Silent shooting ......159, 185 Bracketing........ 100 Single image display.....190 Correction ........99 Single shooting ......61, 81 Custom ........
Page 323 MEMO...
Page 324 CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A. INC. U.S.A. One Canon Plaza, Lake Success, NY 11042-1198, U.S.A. For all inquires concerning this product, call toll free in the U.S. 1-800-OK-CANON CANON CANADA INC. HEADQUARTERS CANADA 6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada CANON CANADA INC.

This manual is also suitable for:

Eos 60da

Canon EOS 60D Instruction Manual

Getting Started

Setting the AF and Drive Modes

Advanced Operations

Flash Photography

Post-Processing Images

Sensor Cleaning

Printing Images

Customizing the Camera

Reference

Quick Links

Related Manuals for Canon EOS 60D

Summary of Contents for Canon EOS 60D