Table of Contents
Advertisement
L Erasing Images
3 Specifying the Range of Images to be Erased
While looking at the images in the index display, you can specify the
first and last images for a range to erase all the specified images at
once.
If the search conditions are set with [32: Set image search conditions]
(p.402), only the found images will be displayed.
432
Select [Select range].
1
Select [Select range] in [31: Erase
images], then press <0>.
Specify the range of images.
2
Select the first image (start point),
then press <0>.
Next, select the last image (end
point), then press <0>.
A checkmark [X] will be appended to
all the images within the specified
range.
Press the <L> button.
3
Erase the image.
4
Select [OK].
The images in the specified range will
be erased.
Advertisement
Table of Contents
