Custom Function Settings - Canon EOS 6D Mark II Instruction Manual

Custom Function SettingsN
3
C.Fn I: Exposure
C.Fn I-1
0: 1/3-stop
1: 1/2-stop
Sets 1/2-stop increments for the shutter speed, aperture, exposure
compensation, AEB, flash exposure compensation, etc.
When [1:1/2-stop] is set, the display will be as shown below.
C.Fn I-2
0: 1/3-stop
1: 1-stop
You can change the manual ISO speed setting increments to a
whole-stop.
Even if [1: 1-stop] is set, ISO speed will be automatically set in 1/3-stop
increments when ISO Auto is set.
Even when [1: 1-stop] is set, you can set ISO 40000 (for still photo
shooting).
C.Fn I-3
0: Enable
When you set the power switch to <2>, the AEB and white
balance bracketing settings will be canceled. AEB settings will also
be canceled when the flash is ready to fire or if you switch to movie
shooting.
1: Disable
The AEB and white balance bracketing settings will not be
canceled even if you set the power switch to <2>. (If the flash
is ready to fire or if you switch to movie shooting, AEB will be
canceled temporarily, but the AEB range will be retained.)
Exposure level increments
ISO speed setting increments
Bracketing auto cancel
471