Table of Contents
Advertisement
Magnified View
To move the AF point or Zone AF frame, use <9> or tap on the spot
you want to magnify.
Press the <u> button or tap on [d] to magnify the image. Each
time you press the button or tap, the magnification changes.
When [Smooth zone] is set, the image will be magnified at the
center of the Zone AF frame. When [Live 1-point AF] is set, image
will be magnified around the position of the AF point.
At 100% (approx. 1x) magnification, use <9> or touch the screen to
move the magnifying frame. Pressing the <0> or <L> button will
return the magnifying frame to the screen center.
Either press the <u> button or tap on [d] to magnify the area
covered by the magnifying frame.
When the image is magnified by approx. 5x or 10x, you can move
the magnified area by using <9> or tapping on the triangle on the
screen top, bottom, left, or right.
When you press the shutter button halfway, the normal view will
return for [Smooth zone]. For [Live 1-point AF], AF will proceed
with the magnified view.
With Servo AF, if you press the shutter button halfway in the
magnified view, the camera will return to the normal view for
focusing.
When the AF method is [Smooth zone]
or [Live 1-point AF] mode, either press
the <u> button or tap on [d] displayed
on the bottom right of the screen. You
can magnify the image by approx. 5x or
10x and check the focus.
Magnified view is not possible with
[u+Tracking].
Focusing with AF (AF Method)
317
Advertisement
Table of Contents
