Table of Contents
Advertisement
X Editing a Movie's First and Last Scenes
You can edit out the first and last scenes of a movie in approx. 1-sec.
increments.
422
On the movie playback screen,
1
select [X].
The movie editing panel will be
displayed at the bottom of the screen.
Specify the part to be edited out.
2
Select either [U] (Cut beginning) or
[V] (Cut end), then press <0>.
Press the <Y> <Z> keys to see the
previous or next frames. Keep
holding down the key to fast forward
or fast rewind the frames. Turn the
<5> dial for frame-by-frame
playback.
After deciding which part to edit out,
press <0>. The portion highlighted
in white on the top of the screen is
what will remain.
Check the edited movie.
3
Select [7] and press <0> to play
back the edited movie.
To change the edited part, go back to
step 2.
To cancel the editing, press the
<M> button, then select [OK] on
the confirmation dialog.
Advertisement
Table of Contents
