Table of Contents
Advertisement
b Rotating the Image
You can rotate the displayed image to the desired orientation.
If you set [51: Auto rotate] to [OnzD] (p.435) before taking vertical
shots, you need not rotate the image as described above.
If the rotated image is not displayed in the rotated orientation during
image playback, set [51: Auto rotate] to [OnzD].
A movie cannot be rotated.
If the search conditions are set with [32: Set image search
conditions] (p.402), only the found images will be displayed.
408
Select [Rotate image].
1
Under the [31] tab, select [Rotate
image], then press <0>.
Select an image.
2
Turn the <5> dial to select the
image to be rotated.
You can also select an image in the
index display (p.399).
Rotate the image.
3
Each time you press <0>, the
image will rotate clockwise as follows:
90° 9 270° 9 0°.
To rotate another image, repeat steps
2 and 3.
Advertisement
Table of Contents
