Selecting The Af Operation - Canon EOS 6D Mark II Instruction Manual

Selecting the AF OperationN
You can select the AF operation characteristics to suit the shooting
conditions or subject. In Basic Zone modes, the optimum AF operation
is set automatically for the respective shooting mode.
Settable only for Live View shooting (not settable for movie shooting).
If focus cannot be achieved, the AF point will turn orange. If this occurs,
the picture cannot be taken even if the shutter button is pressed
completely. Recompose the shot and try to focus again. Or, see
"Shooting Conditions that Make Focusing Difficult" (p.316).
Press the <f> button.
1
Select the AF operation.
2
Press the <Y> <Z> keys to select
the desired AF operation, then press
<0>.
X : One-Shot AF
K
Focus on the subject.
3
Aim the AF point over the subject and
press the shutter button halfway. The
camera will then autofocus in the
selected AF operation.
: Servo AF
305