7. Configuring the Machine Using the
Control Panel
This chapter describes how to configure the machine using the control panel.
Basic Operation
Use the following procedure to access the machine settings.
To check which category the function you want to configure belongs to, see page 222 "Menu Chart".
1.
Press the [Home] key.
2.
Press the [Setting] icon on the [Home] screen.
3.
Select the settings you want to use.
For a list of available items, see page 222 "Menu Chart".
If you select [Address Book], [Network Settings], or [Administrator Tools] menu, you might be
requested to enter a password. Enter the four-digit password, and then press [OK]. For details
about the password, see [Admin. Tools Lock] on page 257 "Administrator Tools Settings".
4.
To confirm setting items and values displayed, press [OK].
5.
To go back to the previous item, press [Exit].
DUE302
221