Switching On And Off - Technogym Synchro Forma User Manual

12 Switching on and off

To turn the equipment on, switch the main switch to the "I" position (on) .
After a quick system check (reset), the equipment is ready for use.
To turn the equipment off, switch the main switch to the "0" position (off).
The equipment must be switched off only at the end of the exercise, when in
standby.
If the equipment is not expected to be used for a long time, as well as turning
it off you should also pull the plug out of the wall socket.
!
Warning
The switch is for turning the equipment on and off but does not isolate
it completely from the mains voltage, even in the "0" position (off). For
complete isolation you must unplug the power supply plug.
Synchro Forma 16