Easily Solved Problems - Technogym Synchro Forma User Manual

14 Easily solved problems

The following table lists a series of problems that may arise during normal use of the equipment. If the solutions given don't solve the problem, or if the problems
are different, ask for help from the Technical Support Service.
Problem
Equipment doesn't switch on
Synchro Forma
Cause
Power supply cable not plugged in
Mains power failure
Power supply cable damaged
Power supply cable connector not plugged
into equipment
The main switch is off
Burnt-out fuse
Remedy
Plug the power supply cable into the wall socket
Check the power supply in the mains socket in question by plugging
in another appliance that definitely works
Contact the Technogym Technical Support Service
Plug the connector in
Switch on the main switch
To replace the blown fuse with a spare contact the Technogym
Technical Support Service
20