5.7 I/O Terminal Block
The 3-pin terminal block, located on the back panel of the PTZ Camera,
provides the interface to one digital input and one digital output. The I/O
terminal block can be used for applications such as motion detection, event
alerts via E-Mail and FTP, and center monitoring through Center V2 and
VSM.
5.7.1 Pin Assignment
The pin assignment for the terminal block:
Figure 5-13
For details on how to enable an installed I/O device, see 12.2 I/O Settings.
64
Pin
Function
1
Output
2
GND
3
Input