Power And Network Connection - GeoVision GV-BX110D User Manual

3.5.2 Power and Network Connection

There are two ways to supply power to the camera:
•
Use a Power over Ethernet (PoE) adapter to connect the camera to
the network, and the power will be provided at the same time.
•
Use the supplied 3-pin Terminal Block and power adapter (except for
GV-MFD110). Follow the steps below to connect the Terminal Block
and power adapter.
1. Insert the orange wire of the Mini Fixed Dome (except GV-MFD110)
to the left pin and the yellow wire to the right pin of the supplied
terminal block.
Figure 3-6
2. Connect the DC 12V Power Adapter to the 3-Pin Terminal Block.
3. Connect the camera to network using a network cable.
Figure 3-7
Mini Fixed Dome
3
35