Sequence Settings - GeoVision GV-BX110D User Manual

5.8.6 Sequence Settings

For PTZ Camera to automatically perform a series of movements, you can
configure a Sequence. A Sequence links up more than two Preset points to
form a sequence of movements. Up to 8 Sequences can be created.
Configuring a Sequence
1 After you have configured the Preset points you wish the camera to
follow (for details, see 5.8.5 Preset Settings), you are ready to
configure a Sequence.
2 Open the VISCA OSD Configuration dialog box and select Sequence.
3 Use the Index drop-down list to select the Sequence number you
wish to configure. Up to 8 Indexes can be created.
4 Use the Point drop-down list to select the number of Preset points to
be included in the Sequence. A Sequence can contain up to 32
Preset points.
76
Figure 5-19