Technical Data - Esu LokSound User Manual

8. 8. 8. 8. 8. LokSound Version 3.0 - Technical data
Dimensions:
Supported protocols:
Motor control:
Function outputs:
Sound part:
8.1 LokSoundXL Version 3.0 - Technical data
Dimensions:
Supported protocols:
Motor control:
Function outputs:
Sound part:
46
34,5mm x 15,5mm x 6,5mm
NMRA / DCC with 14, 28, 128 speed steps.
2- and 4-digit addresses.
Digital Märklin® / Motorola® (old and new).
Analogue DC and AC (can be switched off).
Automatic detection of operating mode. Auto-detect function for DCC speed steps.
Supports Lenz LG 100, Märklin®, Roco® and ZIMO® HLU brake modules.
Intelligent ESU brake mode.
Max load 1.1A continuous. Suitable for DC-, AC- and coreless motors
(auto-detect feature). Silent drive 32 kHz pulse frequency.
Overload protection of motor output.
Fourth generation Back EMF control (may be switched off).
4 outputs, 2 of which may be used for lighting.
250 mA load per output.
Total current of function outputs 0.5 A.
Function Mapping for F1 to F12. Outputs are short circuit protected.
Four (!) independent channels. High performance amplifier with ca. 0,6 Watts.
Sound data in flash memory can be modified. Mode for steam engines, diesel-hydraulic
and diesel-electric engines, electric engines. 8 Mbit memory (for up to 65 seconds).
51 mm x 40 mm x 14 mm
NMRA / DCC with 14, 28, 128 speed steps.
2- and 4-digit addresses.
Digital Märklin® / Motorola® (old and new).
Analogue DC and AC (can be switched off).
Automatic detection of operating mode. Auto-detect function for DCC speed steps.
Supports Lenz LG 100, Märklin®, Roco® and ZIMO® HLU brake modules. Intelligent
ESU brake mode.
3.0A continuous. Suitable for DC-, AC- and coreless motors (auto-detect feature).
Silent drive 32 kHz pulse frequency. Overload protection of motor output. Fourth
generation Back EMF control (may be switched off).
8 outputs, 2 of which may be used for lighting. 600 mA load per output.
Total current of function outputs 2.0 A. Function Mapping for F1 to F12.
Four (!) independent channels. High performance amplifier with ca. 1,5 Watts.
Sound data in flash memory can be modified. Mode for steam engines, diesel-hydraulic
and diesel-electric engines, electric engines. 8 Mbit memory (for up to 65 seconds).

Technical data

user manual LokSound / LokSoundXL V3, 1st edition, 07/2004