Install Rfid Applications; Manage Applications - Honeywell IF2 User Manual

For more information on the jTDS driver, go to http://jtds.sourceforge.net.

Install RFID Applications

The IF2 provides up to 96 MB of storage for your applications. You use the web
browser interface to install applications on the IF2 as described in the next proce-
dure.
Note: Before you install your application on the IF2, you must place the application into a
.zip, .tar, .tar/bz2, or .tar/gz file.
1. From the menu, click Edgeware Applications > Install User Application. The
2. Click Browse and follow the prompts to navigate to the location of the
3. Click Upload. The application is uploaded to the IF2 and placed in the /home/

Manage Applications

To maximize IF2 resources, you can start, stop, or uninstall IF2 edgeware applica-
tions or your installed applications from the web browser interface. You can also
configure applications to auto-start at boot time. For more information, see the
next section.
1. From the menu, click Edgeware Applications > Application Control. The Appli-
2. Choose an option:
38
Install User Application screen appears.
application file.
developer/edgeware/userapp0 directory. After the application is uploaded to
the reader, the application name appears in the Edgeware Applications list.
cation Control screen appears.
The Edgeware Applications section lists all installed edgeware. The User Appli-
cations section lists all applications you have installed through the web
browser interface.
In this screen, you can:
• specify which applications automatically start when the IF2 boots.
• turn applications on and off in real time.
• uninstall applications (except for Developer Tools).
• Check the Auto-Start check box if you want an application to automatically
launch when the IF2 boots.
• Click to stop a running application.
• Click to start an application.
• Click to uninstall an application.
IF2 Network Reader User Guide