Menu Structure; Operation In Stand Alone Mode - ProLights Diamond 193 User Manual

10

3.3 Menu structure

Aut
FUNC
S S
001-511
SLA
tSt

3.4 Operation in Stand Alone mode

In this mode, the unit is set as Master. In this operation mode the unit independently runs through its show
program:
• Press the FUNC button so many times until the display shows [Aut ] (fig.5), and press ENTER button to
confirm the selection.
• Press FUNC button again to enter mode option. In the mode option setting, the stand alone laser show
that you are going to choose is flashing. Press UP or DOWN to change stand alone laser show, you will
have 8 different stand alone preprogrammed laser show. Their display and effect are listed below
• To confirm, press the button ENTER.
The laser is working in stand alone. Each time when you turn on your laser, you will have this confirmed
laser show.
DIAMOND193
ENTER FUNC
S 0
S 1
UP
.
DOWN
.
.
S 9
UP
ENTER
DOWN
ENTER
ENTER
FUNC UP
Aut
Au1
Au2
Au3
UP
DOWN
Sou
So1
So2
So3
ENTER
DOWN ENTER
Fig.5
ENTER