Initial Utility Installation - Planet ICA-4200V User Manual

Full hd 20m ir vari-focal dome ip camera

Hide thumbs Also See for ICA-4200V:

Table of Contents

3. Set the mounting base onto ceiling and center it through the mounting hole, using the

two retaining screws for the main body, supplied by the appurtenance bag.

4. To adjust lens, move the camera body by pan and/or tilt manually and set the

zoom/focus by turning the lens to the left or right direction.

5. Connect the LAN cable to Ethernet's switch or hub and the DC-Jack to the power

source.

Use the power adapter, 12V DC, included in the package and connect it to

wall outlet for AC power. And connect the other cables and connectors if

necessary.

6. When the camera cabling is completed, close the top cover dome housing and

secure it by two screws. And then adjust PIR sensor to proper position. Once the

PIR sensor is well-positioned, secure it by two screws.

7. Done

2.3 Initial Utility Installation

This chapter shows how to quickly set up your IP camera. The camera is with the default

Full HD 20M IR Vari-Focal Dome IP Camera

ICA-4200V

Table of Contents