Streaming - Planet ICA-4200V User Manual

• Access the device by entering Setting
PPPoE
User Name
Password
IP Address / Subnet
Mask / Gateway
Status

3.5.6 Streaming

RTSP is a streaming control protocol, and a starting point for negotiating transports such as
RTP, multicast and unicast, and for negotiating codes. RTSP can be considered a "remote
control" for controlling the media stream delivered by a media server. RTSP servers typically
use RTP as the protocol for the actual transport of audio/video data.
Choose the RTSP port. The RTSP protocol allows a connecting client to
RTSP Port
start a video stream. Enter the RTSP port number to use. The default value
is 554.
Specify the range of transmission port number of video stream. The default
RTP Port
range is 50000 to 50999. User can specify a number between 1024 and
65535.
1. To use the 3GPP function, in addition to previous section, you might need
more information or configuration to make this function work.
2. The camera must be set as multi-profile mode, not mega-pixel mode.
To enable or disable the PPPoE service here.
Type the user name for the PPPoE service which is provided by ISP.
Type the password for the PPPoE service which is provided by ISP.
Shows the IP information got from PPPoE server site.
Shows the Status of PPPoE connection.
42
Full HD 20M IR Vari-Focal Dome IP Camera
Network PPPoE as shown below:
ICA-4200V