Video Configuration - Planet ICA-4200V User Manual

Make sure that the Firmware only applies to this device; once updated, it will be
burned into FLASH ROM of system.
Warning!!!
The downloading firmware procedure cannot be interrupted. If the power and/or
network connection are/is broken during the download procedure, it might possibly cause
serious damage to the device.
Please be aware that you should not turn off the power during updating the firmware and
waiting for the "finish" message. Furthermore, do not try to upgrade new firmware if
necessary.
System Restart

3.8 Video Configuration

This device provides 2 modes of video profile. The first one is 2MEGA Mode which supports
video resolution up to 1920x1080. The second one is 720p Mode which supports video
resolution up to 1280x720. User only can select either one to operate the camera. Switching
between these two modes, the device will take time to re-configure system.
Full HD 20M IR Vari-Focal Dome IP Camera
6. Once the firmware file is selected, select "Upgrade".
7. The upgrade progress information will be displayed
on the screen.
8. A message will be shown while the firmware is
upgraded. Once the upgrading process is completed,
the device will reboot the system automatically.
9. Please wait for 80 seconds, and then you can use
PLANET IPWizard II to search the device again.
The device is restarted without changing any of the
settings.
53
ICA-4200V