Onvif Profile - Planet ICA-4200V User Manual

3.8.4 ONVIF Profile

ONVIF protocol defines profile of video streams. In case, the NVR, CMS and/or VMS connect
to this device via ONVIF protocol. Use this page to define parameters of video streams.
Name
Video Type
Resolution
Rate Control
Max. Frame Rate
GOP Control
To assign a name to the selected profile.
Video codec of the selected profile.
Resolution of the selected profile.
Defines the rate control method of this profile. There are three
options: Constant Bit Rate (CBR), Variable Bit Rate (VBR), and
Enhanced Variable Bit Rate (EVBR).
For CBR, the video bit rate is between low and high bandwidth
based on different resolutions. User can set the desired bit rate to
match the limitation of bandwidth.
For VBR, user should choose the quality level to set the video quality
rather than bit rate. The quality level is between 1 and 100. The
higher value can reach the better quality but of course will consume
higher bandwidth.
For EVBR, the video bitrate is based on normal VBR mode.
However, the bitrate can be limited to the max. bitrate while there are
lots of motions in video.
Defines the targeted frame rate of this profile. For example, set the
frame rate to 15 fps, then the image will be updated for 15 frames
per second. User can set the desired max frame rate versus video
quality under the limited bandwidth.
Defines the Intra/Inter-frame (I/P) ratio of this profile. For example,
57
Full HD 20M IR Vari-Focal Dome IP Camera
ICA-4200V