Initial Utility Installation - Planet ICA-107 Quick Installation Manual

3.7 Initial Utility Installation

This section shows how to quick set up your PT Internet Camera. The
Camera is with the default settings. However to help you find the
networked camera quickly the admin software can search the cameras
in the network that shall help you to configure some basic setting
before you started advanced management and monitoring.
Initial setup should be performed by using the supplied Windows-based
Setup Tool as follows:
Then follow the following instructions to install and use camera admin
software:
1. Insert the bundled product CD into CD-ROM drive to launch the
autorun program.
2. Please click the IP camera model name.
3. When the web page displayed, select and click the "Initial Utility"
hyperlink on the menu to start the installation process.
If the CD's menu does not appear, click "Start" on the
task bar and select "Run" to type "X:\Utility\InitialUtility\
Setup_ICA-M220_x.x.x.EXE", assume X is your CD-
Note
ROM drive.
4. Click Next to start install camera admin software:
1