Event Detection Configuration - Planet ICA-4200V User Manual

one event schedule to enable event triggering.
SMTP Server
Test
SMTP Port
SSL
SMTP Authentication
Authentication User
Name
Authentication
Password
E-mail From
E-mail To
E-mail Subject

3.13 Event Detection Configuration

This device supports 3 types of event detection: Motion Detection, Camera Tampering, Audio
Detection.
Full HD 20M IR Vari-Focal Dome IP Camera
Type the SMTP server name or the IP address of the SMTP
server.
Send a test mail to mail server to check this account is available
or not.
Set port number of SMTP service.
Enable SSL function or not.
Select the authentication required when you send an e-mail.
Disable: If no authentication is required when an e-mail is send.
Enable: If authentication is required when an e-mail is sent.
Type the user name for the SMTP server if Authentication is
Enabled.
Type the password for the SMTP server if Authentication is
Enabled.
Type the sender's e-mail address. This address is used to reply
e-mails.
Type the receiver's e-mail address.
Type the subject/title of the e-mail.
63
ICA-4200V