Chapter 3. Initial Utility Installation; Search And Configure Network By Planet Ip Installer - Planet ICA-HM316 User Manual

This chapter shows how to quick set up your H.264 camera. The camera is with the default
settings. However to help you find the networked camera quickly the windows utility PLANET IP
Installer can search the cameras in the network that shall help you to configure some basic setting
before you started advanced management and monitoring.
1. Insert the bundled CD into the CD-ROM drive to launch the auto-run program. Once
completed, a welcome menu screen will appear.
2. Click the "PLANET IPInstaller" hyperlink; you will see the dialog box as below.
NOTE: If the welcome screen does not appear, click "Start" at the taskbar. Then, select
"Run" and type "D:\Utility\PLANETIPinstaller\PLANETIPinstaller.exe", assume D
drive is your CD-ROM drive.
When you installed the camera on a LAN environment, you may execute PLANET IP Installer to
discover camera's IP address and set up related parameters in the camera.

3.1 Search and Configure Network by PLANET IP Installer

When you installed the Camera on a LAN environment, you have two easy ways to search your
Cameras by PLANET IP Installer or UPnP discovery. Here is the way to execute PLANET IP
Installer to discover Camera's IP address and set up related parameter in a Camera.
Search and Configure Network
1. OS: Windows XP SP2 or above. If the following "Windows Security Alert" popup, please click
"Unblock".
Chapter 3. Initial
15
2 Mega‐Pixel Outdoor IR IP Camera
ICA‐HM316 / ICA‐HM316W
Utility
Installation