Upnp - Planet ICA-4200V User Manual

Otherwise this device cannot serve 3GPP stream.
3. To use the 3GPP function, it is strongly recommended to install the Networked
Device with a public and fixed IP address without any firewall protection.
4. Port 554 is the default for RTSP service. However, sometimes, some service
providers change this port number for some reasons. If so, user needs to
change this port accordingly.
1.Choose a verified player (PacketVideo, QuickTime or Real player)
Dialing
2. Use the following URL to access: rtsp://host/mpeg4/media.3gp
procedure
Where host is the host name or IP address of the camera.
Compatible
Please contact your dealer to get the approved list of compatible 3G
3G mobile
phone.
phone

3.5.7 UPnP

UPnP is short for Universal Plug and Play, which is a networking architecture that provides
compatibility among networking equipment, software, and peripherals. This device is an UPnP
enabled Internet camera. If your operating system is UPnP enabled, the device will
automatically be detected and a new icon will be added to "My Network Places." If you do not
want to use the UPnP functionality, it can be disabled.
In addition, this device also provides UPnP IGD function for NAT traversal easily. Use NAT
traversal when your device is located on an intranet (LAN) and you wish to make it available
from the other (WAN) side of a NAT router. With NAT traversal properly configured, all HTTP
traffic to an external HTTP port in the NAT router will be forwarded to the device.
UPnP
Friendly Name
UPnP NAT Traversal
Port Range
To enable or disable the UPnP service here.
Shows the friendly name of this device here.
When enabled, the device will attempt to configure port mapping in
a NAT router on your network, using UPnP™. Note that UPnP™
must be enabled in the NAT router first.
The port range will open in NAT router.
43
Full HD 20M IR Vari-Focal Dome IP Camera
ICA-4200V