16 - Messages - Tascam SS-CDR250N Owner's Manual

The following is a list of messages that appear in pop-up windows.
Refer to this list if one of these pop-up messages appears on the SS-R250N/SS-CDR250N and you want to check the meaning or deter-
mine a proper response.
Message
Backup REC is not available.
(MM is not available)
Backup REC is not available.
MM formatting not optimal
for Recording.
Cannot add timer event.
Timer event limit reached.
Cannot change while playing.
Cannot change while recording.
Cannot Copy.
"ffffffff"
already exist in current folder
Cannot Copy File.
"ffffffff"
already exist in Destination.
Cannot Copy Folder.
"ffffffff"
already exist in Destination.
Cannot Copy for Insert.
"ffffffff"
already exist in current Fold-
er.
Cannot Copy.
Source folder and
Destination folder is same.
Cannot Copy.
Destination folder is
sub-folder of source folder.
Cannot create new file/folder.
Media Full.
Cannot create new mark point.
Mark point already exists
at the same timestamp.
Cannot edit this mark point.
Mark point already exists
at the same timestamp.
Cannot Edit read-only file
Cannot execute combine.
Combine file size is over XXX.
Cannot execute combine.
Media Full.
Cannot execute.
Media Full.
Cannot increment Track
Interval is too short.
Cannot increment Track
System limit reached.
Please create new Folder.
Cannot make more than 1000
folders.
Cannot RECORD
(Internal state error)
Meaning
Backup recording is disabled because the medium cannot
be used.
Backup recording is disabled because the medium has not
been formatted by this unit and cannot be guaranteed to
properly record.
Format it with this unit before use.
The limit has been reached so no more timer events can be
added.
This setting cannot be changed during playback.
This setting cannot be changed when recording.
You tried to copy a file to the current folder.
The current folder, however, already contained a file with
the same name as the file being copied.
The selected file already exists in the copy destination, so it
cannot be copied.
The selected folder already exists in the copy destination, so
it cannot be copied.
The selected file already exists in the current folder, so it
cannot be inserted.
The copy source folder and destination folder are the same,
so copying is not possible.
The copy destination folder is a subfolder of the copy source
folder, so copying is not possible.
There is no open space on the medium, so a new file or
folder cannot be created.
You are trying to create a mark where one already exists.
A time position cannot have more than one mark.
The market cannot be edited because another mark already
exists at that time.
The file is read only and cannot be edited.
The file size after combination would exceed 2 GB, so com-
bining is not possible.
The medium does not have enough open space so combin-
ing is not possible.
The medium does not have enough open space so execu-
tion is not possible.
Either you pressed the RECORD [TRK INC] button within the
first 4 seconds of recording, or writing to the medium was
too slow, so starting to record a new track is not possible.
The number of files in the folder or total number of files and
directories, for example, is too great, so starting to record a
new track is not possible.
The maximum number of folders has already been reached,
so a new folder cannot be created.
Recording cannot start for some reason.
16 – Messages
Note
MM = SD1, SD2 or USB
MM = SD1, SD2 or USB
ffffffff = file name
ffffffff = file name
ffffffff = folder name
ffffffff = file name
If this occurs frequently, prepare
information about it including the
operation steps that cause it, and
contact the TASCAM customer
support service.
TASCAM SS-CDR250N / SS-R250N
103