Slot Loading Of Discs; Using The Teac Global Site; Product Registration - Tascam SS-CDR250N Owner's Manual

1 – Introduction

Slot loading of discs

1.
As shown in the illustration, hold the disc with the labeled
side up and insert it part way into the slot.
2.
Push the disc in a little further and it will be pulled in auto-
matically just before it disappears into the slot.
Trouble inserting a disc
If the disc becomes stuck during insertion, for example, and is
difficult to push, do not try to force the disc in. Pull the disc out
once and press the EJECT button and then try inserting it again.
(Trying to force the disc in could damage the unit.)

Using the TEAC Global Site

You can download this Owner's Manual and the Reference Man-
ual necessary for this unit from the TEAC Global Site (http://
teac-global.com/).
In the TASCAM Downloads section, select the desired language
to open the Downloads website page for that language.

Product registration

Customers in the USA, please visit the following TASCAM web-
site to register your TASCAM product online.
http://tascam.com/
12
TASCAM SS-CDR250N / SS-R250N