16 - Messages; General Messages - Tascam Digital Portastudio DP-24 Owner's Manual

General messages

The following list shows the messages that may pop up during the use of the unit.
These messages alert you to conditions that may arise while you are using the unit. Consult the table below if you see
something you do not understand or if you want to know how to solve a problem.
Message
Can not Import
Cannot Clear
Current
Card Error
Card Full
Empty Export
Track
Export File Too
Big
File Not Found
Format Error
Format CARD
I/O Too Short
Import Failed
Export Failed
Import File Too
Large
In Bounce Mode
In Master Mode
In Punch Mode
In Repeat Mode
Invalid Card
Invalid Card
Change Card
Mark Full
This pop-up appears when the Sample Rate or Sample Bit of the selected file in the AUDIO
DEPOT-IMPORT menu differs from the current song.
The current track cannot be deleted.
A virtual track assigned to a physical track cannot be deleted.
The card could not be handled properly. Replace the card.
The card has no remaining capacity. Erase unnecessary files or move them to your computer to
make open space.
You tried to export a track that does not contain any recording data.
This pop-up appears if you try to export a song track that does not contain any recording. (See
"Exporting tracks" on page 83.)
Export a song track that has been recorded.
The track to be exported exceeds the SD card available capacity.
You have tried to export a track to the AudioDepot folder, but the size is too large for the
remaining space on the SD card.
Delete unnecessary songs or files from the AudioDepot folder to create more space on the SD
card, then try to export the track again.
File to be imported could not be found.
You tried to import a WAV file from the AudioDepot folder, but there is no WAV files in it. (See
"Importing tracks" on page 82.)
Connect the unit to a computer and transfer the files that you want to import from the
computer to the AudioDepot folder of the unit.
The formatting of the card is abnormal or corrupted. This message also appears if you
formatted the card for FAT format using a computer connected via USB and if an unformatted
card is inserted in the unit.
Always use the DP-24 to format cards to be used with it. Replace the card or format the card
using the menu.
FORMAT
Execution of FAT formatting erases all data currently on the card.
Interval between IN and OUT points is too short.
You tried to enter repeat mode, but the time between the IN and OUT points is too short.
Import or export failed.
Size of file to be imported is too big.
You tried to import a WAV file from the AudioDepot folder that is too large for the remaining
space on the SD card. Free up some space in the AudioDepot folder by deleting unnecessary
songs, and try again.
mode is active.
Bounce
You tried to perform an action that cannot be done while in
mode is active.
Mastering
You tried to perform an action that cannot be done while in
mode is active.
Auto Punch
You tried to perform an action that cannot be done while in
Repeat Playback mode is active.
You tried to perform an action that cannot be done while in Repeat Playback mode.
The format of the inserted SD card cannot be used in this unit.
Insert another SD card after turning off the unit, or format the card using
screen.
MENU
Something might be wrong with the card. Replace the card.
It is not possible to register more location marks.
You tried to store more than 99 location marks in a song. (See "Location marks" on page 54.)
Delete some location marks and try again.
16 – Messages
Description and remedy
Bounce
Mastering
Auto Punch
mode.
mode.
mode.
on the
FORMAT
93
TASCAM DP-24