Erasing Cd-Rw Discs; Erasing Tracks; Refreshing Discs - Tascam SS-CDR250N Owner's Manual

10 – CD functions (SS-CDR250N only)

Erasing CD-RW discs

You can completely erase an entire CD-RW disc.
1.
Select the ERASE item on the CD page to open the ERASE
screen. (See "Menu operation procedures" on page 22.)
2.
Press the MULTI JOG dial.
A confirmation pop-up message will appear.
3.
Press and hold the MULTI JOG dial to start erasing the disc.
When disc erasure completes, the CD menu will reopen.

Erasing tracks

Tracks can be erased on CD-RW discs in the audio CD format.
The specified track and all later tracks (until the last track on the
disc) will be erased.
1.
Select the ERASE item on the CD page to open the ERASE
screen. (See "Menu operation procedures" on page 22.)
2.
Turn the MULTI JOG dial to select the Erase Track item.
3.
Press the MULTI JOG dial.
Select the range of tracks to be deleted.
4.
Turn the MULTI JOG dial to select the first track in the range
of tracks to be deleted.
In the example above, track 14 was selected.
The last track in the range (number 22 in the example
above) is always the last track on the disc and cannot be
changed.
74
TASCAM SS-CDR250N / SS-R250N
5.
After selecting, press the MULTI JOG dial.
A confirmation pop-up message will appear.
6.
Press and hold the MULTI JOG dial to start erasing the
tracks.
When track erasure completes, the CD menu will reopen.
NOTE
i When erasing tracks on a finalized CD-RW disc, the disc
will first be unfinalized and then the selected tracks will be
erased.
i This operation is only possible with audio CD format discs.

Refreshing discs

You can refresh (completely erase) a CD-RW disc. The unit might
not be unable to recognize a CD-RW disc in some cases, such as
if finalization was interrupted by a power failure, or if a disc has
been used by a computer. In such cases, follow these procedures
to refresh the CD-RW disc so that the unit can recognize it.
1.
Select the ERASE item on the CD page to open the ERASE
screen. (See "Menu operation procedures" on page 22.)
2.
Turn the MULTI JOG dial to select the Refresh item.
3.
Press the MULTI JOG dial.
A confirmation pop-up message will appear.
4.
Press and hold the MULTI JOG dial to start refreshing (com-
pletely erasing) the CD-RW disc.
When the CD-RW disc has been refreshed (completely
erased), the CD menu will reopen.