Using The Edit Menu; Edit Menu Operations; Deleting Tracks (Delete) - Tascam SS-CDR250N Owner's Manual

Solid state recorder
Table of Contents

Advertisement

9 – Using the Edit Menu (USB flash drives and SD cards only

Edit menu operations

Press the KEY [EDIT] button while pressing the SHIFT button to
open the edit menu pop-up.
Turn the MULTI JOG dial to select the desired operation, and
press the MULTI JOG dial to execute it as follows.
NOTE
When a protected SD card is loaded in the unit, the following
operations are not possible. (See "SD card write-protection
switches" on page 28.)
DELETE
Delete the selected track. (See "Deleting tracks (DELETE)" on
page 70.)
DIVIDE
Divide the selected track. (See "Dividing tracks (DIVIDE)" on page
71.)
COMBINE
Combine the selected tracks. (See "Combining tracks (COMBINE)"
on page 72.)
UNDO
Undo an edit menu operation. (See "Undoing edit menu opera-
tions (UNDO)" on page 72.)
70
TASCAM SS-CDR250N / SS-R250N

Deleting tracks (DELETE)

Tracks shown on the Home Screen can be deleted from USB
flash drives and SD cards.
This is only possible when the playback mode is set to CONTINUE.
1.
Select the track to delete, and press the KEY [EDIT] button
while pressing the SHIFT button to open the edit menu
pop-up. (See "Edit menu operations" on page 70.)
2.
Select DELETE, and press the MULTI JOG dial.
The following pop-up message will appear.
NOTE
Press the MENU [JOG] button to cancel deletion.
3.
Press the MULTI JOG dial.
A second confirmation pop-up message will appear.
4.
Press and hold the MULTI JOG dial to delete the selected
track from the USB flash drive or SD card.
A "Deleting Track..." pop-up, for example, appears while
the track is being deleted.
NOTE
Immediately after deleting a file, you can undo the deletion.
(See "Undoing edit menu operations (UNDO)" on page 72.)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ss-r250n

Table of Contents