Wireless Remote Control (Tascam Rc-10); Home Screen - Tascam SS-CDR250N Owner's Manual

Solid state recorder
Table of Contents

Advertisement

Wireless remote control (TASCAM RC-10)

/
button
1 m
.
Press briefly during playback to skip to the beginning of the
track.
Press briefly when near the beginning of a track to skip to the
beginning of the track before it.
Press and hold to search backwards.
When the BROWSE screen is open, press to move up one level.
(See "Navigating the BROWSE screen" on page 42.)
STOP [
] button
8
2
Press to stop playback or recording.
RECORD [
] button
0
3
Press when stopped to start recording standby.
When recording, press to increment the track number (create
a new file and continue recording). (See "Incrementing track
numbers manually" on page 66.)
F1 button
4
Press when stopped or playing back to start playback stand-
by.
Press when recording to start recording standby.
F2 button
5
When a Menu Screen is open, press this button to return to
the Home Screen.
Press when the Home Screen is open to change the display
mode. (See "Home Screen" on page 17.)
/
button
6 ,
/
Press briefly to skip to the beginning of the next track.
Press and hold to search forward.
When the BROWSE screen is open and a folder is selected,
press this button to open that folder.
PLAY [
] button
7
7
Press when stopped or playback ready to start playback.
Press when in recording standby to start recording.
MARK button
8
When stopped, recording, playing back or in playback stand-
by, press this button to add a mark. (See "Adding marks man-
ually when recording" on page 68.), (See "Adding marks" on
page 87.)
F3 [+] button
9
Press to move to the next mark.
When the BROWSE screen is open, press to move the cursor
up. (See "Navigating the BROWSE screen" on page 42.)
F4 [−] button
0
Press to move to the mark before the current location.
When the BROWSE screen is open, press to move the cursor
down. (See "Navigating the BROWSE screen" on page 42.)
2 – Names and Functions of Parts

Home Screen

The Home Screen has four display modes: TRACK, TOTAL, TITLE
and FOLDER.
Each time you press the HOME [INFO] button, the display mode
will change.
Home Screen TRACK display mode
Home Screen TOTAL display mode
Home Screen TITLE display mode
Home Screen FOLDER display mode
Level meters
1
This area shows the levels of the input and playback signals.
Elapsed time from track beginning
2
This shows the elapsed time from the beginning of the cur-
rent track (hours: minutes: seconds).
During jog playback 10msec intervals are also shown.
Remaining time to track end
3
This shows the remaining time to the end of the current track
(hours: minutes: seconds).
TASCAM SS-CDR250N / SS-R250N
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ss-r250n

Table of Contents