Recording Screen - Tascam SS-CDR250N Owner's Manual

Recording Screen

The Recording Screen has four display modes: TRACK, TOTAL, TI-
TLE and FOLDER.
Each time you press the HOME [INFO] button, the display mode
will change.
Recording Screen TRACK display mode
Recording Screen TOTAL display mode
Recording Screen TITLE display mode
Recording Screen FOLDER display mode
Input levels
1
The input sound levels are shown.
Elapsed track recording time
2
This shows the elapsed time of the recorded track (hours:
minutes: seconds).
Remaining track recording time
3
This shows the remaining available recording time (hours:
minutes: seconds).
File type
4
This shows the current recording file format.
When dual format recording is on, two file formats are shown
like . (See "Making recording format settings" on
page 61.)
2 – Names and Functions of Parts
Display mode
5
This shows the current Home Screen display mode.
Track number
6
This shows the number of the track currently being recorded.
Track recording position
7
The current recording position is shown by a bar. As record-
ing progresses, the bar extends from the left.
Recording function activation status
8
Icons appear for the recording functions that are currently on.
Icon Meaning
Appears when the dynamics function LIMITER is
on
Appears when the dynamics function COMP_SOFT
is on
Appears when the dynamics function COMP_HARD
is on
Appears when the automatic gain control function
is on
Appears when the sampling rate converter is on
Appears when the sync recording function is on
Appears when the automatic track incrementation
function is on
Appears when the automatic mark function is on
Current medium
9
This shows the name of the currently selected medium.
When the relay recording function is on, an icon like
will appear that shows the current medium and the next me-
dium to be used for recording.(See "Making recording format
settings" on page 61.)
When the backup function is on, an icon like
pear that shows the two types of media used for recording.
(See "Making recording format settings" on page 61.)
Track title
0
This shows the title of the track being recorded.
Phantom power supply status
q
When phantom power is on, the
ting phantom power" on page 59.)
Low-cut filter setting status
w
When the low-cut filter is set, the
ting the low-cut filter" on page 60.)
Timer event setting status
e
The icon appears when the timer event function is on. (See
"Turning the timer event function on/off" on page 81.)
Input setting status
r
This shows the name of the currently selected input.
Icon
Total track elapsed time
t
This shows the total recording time of everything on the cur-
rent medium (hours: minutes: seconds).
TASCAM SS-CDR250N / SS-R250N
icon appears. (See "Set-
icon appears. (See "Set-
Meaning
Input from ANALOG IN (UNBALANCED)
L/R jacks
Input from MIC/LINE IN (BALANCED)
jacks
Input from AES/EBU IN jack
Input from SPDIF IN jack
Input from IF-DA2 Dante interface card
will ap-
19