Table of Contents
Advertisement
12.
Turn the MULTI JOG dial to select where you want to write
the data (the target).
If the medium already has a folder structure, move on the
BROWSE screen to where you want to write the content.
The folders and files will be written to the position indicated
by "RIP HERE".
13.
After selecting the write position, select the NEXT STEP item
in the file menu, and press the MULTI JOG dial.
A confirmation pop-up message will appear.
14.
Press the MULTI JOG dial to start writing to the selected
medium.
When track writing completes, the CD menu will reopen.
Copying files on a data CD
These are the procedures for copying MP3 and WAV files from
data CDs without changing their formats to the selected medi-
um (USB flash drive or SD card).
In the following procedures, we assume that CD is selected as the
current medium and that the CD-R/CD-RW disc that contains
the files to be copied and the medium to which they are to be
copied are loaded in the unit.
NOTE
Press the MENU button or select the PREVIOUS STEP item in
the pull-up menu to return to the previous step.
1.
Select the RIP TO MEMORY item on the CD page (See "Menu
operation procedures" on page 22.)
2.
Press the MULTI JOG dial to open a pop-up with destination
media options for file copying.
3.
Turn the MULTI JOG dial to select the copy destination me-
dium.
NOTE
An error message will appear if the selected medium is not
loaded.
10 – CD functions (SS-CDR250N only)
4.
Press the MULTI JOG dial to open the SELECT RIP SOURCE
screen.
5.
Select a file or folder to copy on the SELECT RIP SOURCE
screen, and press the MULTI JOG dial to open the pop-up
file menu.
If you select a folder, all files inside the folder will become
source files.
6.
Select the SELECT/UNSELECT item in the file menu, and
press the MULTI JOG dial.
A check (4) is added to selected folders and files.
Multiple files and folders inside the same folder can be se-
lected.
To select multiple folders and files, repeat this procedure:
select a desired folder or file, press the MULTI JOG dial to
open the file pop-up menu, select the SELECT/UNSELECT
item and press the MULTI JOG dial.
To deselect the selected folder or file, press the MULTI JOG
dial to open the file pop-up menu, select the SELECT/UNSE-
LECT item and press the MULTI JOG dial again.
NOTE
i Since multiple folders and files can only be selected inside
the same folder, you will not be able to use the SELECT/UN-
SELECT item in the file menu to select a different folder after
selecting the first folder or file.
i If the total size of the files to be copied exceeds the remain-
ing capacity of the selected medium or if the number of
tracks or folders exceed system limits, a corresponding "No
Free Space", "Track limit reached." or "Folder limit
reached." pop-up message will appear.
i If this occurs, press the MENU [JOG] button to close the pop-
up message, and reduce the total copy source size or number
before selecting the NEXT STEP item.
7.
After selecting the files to copy, select the NEXT STEP item
in the file menu, and press the MULTI JOG dial to confirm
the selection.
The RIP TARGET SELECT screen where you can select the
write destination (target) opens
TASCAM SS-CDR250N / SS-R250N
79
Advertisement
Table of Contents
