ZyXEL Communications Prestige 2302RL Support Notes page 18


Example
The following example shows how to dial to an ISP via the Prestige and then establish a tunnel to a private
network. You need to configure the settings on a PPTP server (such as a Windows NT server), a PPTP client
(Windows 9x) and the Prestige to set up the PPTP application. The following summarizes the setting for the
corresponding PPTP device.
o PPTP server setup (Windows NT)





o PPTP client setup (Windows n9x)


o Prestige Setup

Before establishing a VPN connection from the PPTP client (Windows 9x) to the PPTP server
(Windows NT server), you must first connect the Prestige to the ISP for Internet access.

Enter the IP address and the port number(s) of the PPTP server to allow public access to the server
behind the Prestige. The following shows a configuration example.
Create a new VPN service in Control Panel>Network
Create a new PPTP user account
Enable the RAS port
Select a network protocol (such as IPX, TCP/IP or NetBEUI) for the RSA port
Set the Prestige as the Internet gateway
In Dial-up Networking, create a secure VPN connection through the Prestige (using
the WAN IP address) and enter the correct user name and password to log into the
Windows NT RAS server.
Set the Prestige that connects to the ISP as the Internet gateway.
All contents copyright (c) 2007 ZyXEL Communications Corporation.
Prestige 2302RL Support Notes
18