Table of Contents
Advertisement
Voice – Common Settings
You can click PHONE in the navigation panel and then Common to display the following screen. Use
this screen to configure general phone port settings.
The following table describes the labels in this screen.
Label
Country Code
Immediate Dial
Incoming
Lifeline Call
mapping to
(Lifeline
models
only)
Call Service
Mode
Description
Use the drop-down list box to select the country where your Prestige is
located. Do not use Default.
Use these fields to specify phone numbers to which the Prestige will
always send calls through the regular phone service without the need of
dialing a prefix number. These numbers must be for phones on the PSTN
(not VoIP phones).
Phone 1 and Phone 2 correspond to the Prestige's physical PHONE 1
and 2 ports, respectively. Select whether you want to receive regular
(PSTN) phone calls on Phone 1, Phone 2 or both. If you select both, all of
the phones connected to the Prestige's PHONE ports will ring when a call
comes in on the PSTN line.
Use this field to set how the Prestige handles supplementary phone
services (call hold, call waiting, call transfer and three-way conference
All contents copyright (c) 2007 ZyXEL Communications Corporation.
Prestige 2302RL Support Notes
108
Advertisement
Table of Contents
