Quality Of Service (Qos) - ZyXEL Communications Prestige 2302RL Support Notes

Call Forward
Table
Caller Ringing
Enable
Caller Ringing
Tone
On Hold
Enable
On Hold Tone
Back
Apply
Reset

Quality of Service (QoS)

Quality of Service (QoS) refers to both a network's ability to deliver data with minimum delay, and the
networking methods used to provide bandwidth for real-time multimedia applications.
Type Of Service (ToS)
Network traffic can be classified by setting the ToS (Type Of Service) values at the data source (for example, at
the Prestige) so a server can decide the best method of delivery, that is the least cost, fastest route and so on.
VLAN
Virtual Local Area Network (VLAN) allows a physical network to be partitioned into multiple logical networks.
Select which call forwarding table you want the Prestige to use to block
or redirect calls. You can use a different call forwarding table for each
SIP account or use the same call forwarding table for both.
Check this box if you want to specify what tone people hear when they
call you. The Prestige provides a default tone, but you can add additional
tones using IVR.
Select the tone you want people to hear when they call you. You should
setup Tones 1 - 8 using IVR first.
Check this box if you want to specify what tone people hear when you
put them on hold. The Prestige provides a default tone, but you can add
additional tones using IVR.
Select the tone you want people to hear when you put them on hold. You
should setup Tones 1 - 8 using IVR first.
Click Back to return to the VoIP screen without saving configuration
changes.
Click Apply to save your changes back to the Prestige.
Click Reset to begin configuring this screen afresh.
All contents copyright (c) 2007 ZyXEL Communications Corporation.
Prestige 2302RL Support Notes
104