ZyXEL Communications Prestige 2302RL Support Notes page 45

Generic and TCP/IP (and IPX)
rules on the Prestige. The SMT automatically detects and prevents you from activating two filter types at the
same time. If you configure a Generic and a TCP/IP filter rule (as shown in the following figures) and try to
activate them at the same time, the
displays.
Menu 21.1.1:
Filter #: 1,1
Filter Type= Generic Filter Rule
Active= Yes
Offset= 0
Length= 0
Mask= N/A
Value= N/A
More= No
Action Matched= Check Next Rule
Action Not Matched= Check Next Rule
Menu 21.1.2:
Filter #: 1,2
Filter Type= TCP/IP Filter Rule
Active= Yes
IP Protocol= 0
Destination: IP Addr= 0.0.0.0
filter rules are in different filter sets. You can only activate one type of filter
'Protocol and device filter rules cannot be active together'
Menu 21.1.1 - Generic Filter Rule
Log= None
Menu 21.1.2 - TCP/IP Filter Rule
IP Source Route= No
IP Mask= 0.0.0.0
Port #= 0
Port # Comp= None
Source: IP Addr= 0.0.0.0
IP Mask= 0.0.0.0
All contents copyright (c) 2007 ZyXEL Communications Corporation.
Prestige 2302RL Support Notes
error message
45